Acoustic plane-wave scattering from a rough surface over a random fluid medium

Acoustic plane-wave scattering from a rough surface overlying a fluid half-space with a sound-speed distribution subject to a small random variation is considered. Under the assumption that the surface roughness and medium randomness are statistically independent, the scattered field may be derived by first solving for the mean field in the medium, and then incorporating with boundary-perturbation method to obtain the total mean field and the power spectral density of the scattered field. The employed algorithm is compatible to the analysis available in the existing literature so that the formulations are conveniently integrated. The results for the power spectral density have shown that the effects of medium inhomogeneities on the rough surface scattering are limited in a spectral regime where the scattered components have shallow grazing angles. The distribution of the power spectral density over the space is primarily governed by the power spectrum and correlation lengths of the rough surface.     

双层局部开孔板沉箱对波浪反射的理论研究

提出了一种用于研究由双层开孔板和一个不透水后板的开孔结构对斜向波反射率的理论分析方法。整个流域被分成三个子域，在每个子域内应用特征函数展开法以得到该域内包含未知展开系数的势函数的表达式，在速度势的展开中，考虑了非传播模态波浪的影响。通过匹配开孔板处的边界条件可以求解待定的展开系数，继而求解双层开孔板防波堤结构对斜向波的反射率。数值计算结果与试验结果进行了比较，符合较好。并进一步讨论了几个重要因素对反射系数的影响。     

非常规管节点疲劳寿命分析与计算

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。     

16米风化砂回填地基的深层振密加固

结合北方某重力式深水 ( -1 6.0 m)码头沉箱后壁 1 4.5 m范围的回填风化砂经深层振密处理这一工程实例 ,介绍了回填砂振密的技术要求、施工工艺和方法及振密效果的检测。同时对施工与检测中的某些技术问题提出了自己的看法。     

Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.     

长江口区风浪要素计算的探讨

本文以长江口区波浪实测资料为依据，对目前国内外常用的风浪要素计算方法进行了比较分析，认为就目前资料条件下，最适用于长江口区的、能满足工程设计等要求的风浪要素计算方法为莆田试验站方法（莆田公式）。     

海洋中液-固界面作用的分形研究Ⅰ.SAXS法测量固体交换剂的分维

本文将分形作为一个新概念,应用到海洋化学的液-固界面作用的一系列的研究上。根据用SAXS法测定一些常见的粘土矿物(高岭石,蒙脱石)和水合氧化物(水锰矿、δ-MnO_2、氧化铁凝胶、针铁矿、无定形氧化铁)的分维结果,可将这些结果划分成三类:(1)小尺度模量下具有表面分形;大尺度模量下具有质量分形。(2)只有一种分维值的表面分形。(3)在小尺度模量下和大尺度模量下分别具有不同分维值的表面分形。     

A polar method for obtaining wave resonating quadruplets in finite depths

A polar method for obtaining wave resonating quadruplets {K₁, K₂, K₃, K₄} in the computation of nonlinear wave–wave interaction source term of the wave model is presented with results for both deep and finite water depths. The method first determines the end radial points of the locus equation for K₂, for each set of input wave vectors (K₁, K₃) on the symmetry. The locus of K₂ (and hence K₄) is then traced in the anti-clockwise direction starting with the maximum radial point on the line of symmetry. It is shown that when k₃>k₁, the number of points on the locus varies when the orientations of the input wave vectors are changed and reduces when the difference in the magnitude of the input wave vectors is increased. A significant advantage in this method is that the angular increment on the locus for K₂ can be kept constant.     

悬对沙Mellor-Yamada海洋边界层模型计算结果的影响

为了分析海洋水体垂向水流紊动及紊动交换情况而采用了一维的海洋边界层模型(Mellor-Yamada)并利用数值实验的方法对悬沙、盐度、温度等数据进行分析。原模型未将悬沙考虑在内，本文试将它引入进去探讨由于它的存在对紊动混合特性的影响。2000年4月，Mellor将最初的模型引入了依赖于Richardson数的紊动动能耗散率。本文通过比较具有悬沙和不具有悬沙两种情况下的速度、温度和盐度垂向分布随时间的变化，分析讨论由于悬沙的存在所引发的密度层化对紊动混合作用的影响，并发现悬浮泥沙抑制了部分模拟时间的紊动混合作用。     

Nature of the connection between the Northern and Southern Zechstein Basins across the Mid North Sea High

The seismic expression of a salt-filled channel which cuts across the Mid North Sea High in Quadrant 37 is described, with features interpreted as being produced by salt-edge dissolution forming both eastern and western margins of the channel. The apparent half-graben nature of the channel is shown to be only superficial, and due to complex faulting associated with, but not defining, its western margin. The shallower faulting here is a Mesozoic to early Tertiary growth fault related to local dissolution of Zechstein salt. The dissolution effect appears in turn to have been localized by the presence of a deeper fault that was already downthrown to the east in Zechstein times, when it seems to have limited the eastward progradation of Zechstein shelf carbonates and anhydrites, and had probably ceased to move significantly before the onset of the Late Cimmerian erosional phase. The origin of this arcuate fault is tentatively ascribed to subsidence around a granite batholith. Zechstein salt originally spread some distance to the east and west of the channel; it was dissolved from the edges inwards, mainly before the Late Cretaceous, giving rise to a thicker Mesozoic sequence on parts of the flanks of the channel than in the middle. Besides providing an interesting structural case history, the features described have implications regarding Zechstein sedimentation, reservoir potential, the tectonic history of the North Sea, and the nature of the Mid North Sea High itself.