高精度新方法测量计算船舶磁场分布

将高精度质子磁探仪和位场变换理论用于测量计算船舶磁场，以研究其在海洋中的分布。由质子磁探仪实测海面上１０ｍ处磁场的模（船的磁场与地磁场矢量的和的绝对值），用位场变换理论计算出船的磁场三个分量在水面和水下的分布；并采用一系列有效措施，提高计算速度和结果的精度。将该方法和磁球理论严格解比较，在ｚ＝０面上误差小于０．１％，在ｚ＝－２０ｍ面上误差小于１％；还给出船的磁场强度在船的纵横向的分布曲线和平面立体     

三峡及邻区晚第三纪以来构造应力场特征探讨

用三峡及邻区（东经１０８°～１１３°，北纬２９°～３３°）地质资料，地震资料，现 场地应力测量资料论证三峡及邻区晚第三纪以来构造应力场稳定性及其分区特 征。     

Virgin rock temperatures from well logs — accuracy analysis for some advanced inversion models

Temperature data from 18 measurement series obtained during logging of the Oseberg field in the northern North Sea are presented. Because the measurement series are taken at approximately the same depth, they should give identical temperatures after depth correction, and are suitable for assessing the performance of different models used to determine virgin rock temperatures from well log information.We have used this data set to test the properties of the different models given by Shen and Beck (1986). Although these models were built to simulate closely the thermal recovery of a well and are unbiased, the uncertainties in the temperature estimates when applied to real data are found to be no less than those from simpler (biased) models. This fact confirms the conclusion of Hermanrud (1989a) who showed that physical factors other than those presently accounted for significantly influence the thermal recovery of a borehole.     

漳州地区热田的水热活动及其成因

本文通过漳州地热田及其周围地区的水热活动、地质构造特征及人工爆破、重力、地磁、电性结构、地震活动性等综合地球物理场之间关系分析，得出漳州地热田是高热异常背景下产生的对流型水热系统：深切到上地幔的ＮＥ向长乐－南澳断裂、ＮＷ向九龙江断裂及Ｅ－Ｗ向南靖－厦门断裂控制了地下水的深循环，使大气降水得以下渗到〉３ｋｍ深度，被地温加热并富集起来，在静水压力作用下沿通道－断裂带的交汇部位上涌。热田区破碎的岩石导致     

烟威渔场盐度预报及分析

本文以我国北黄海的烟威渔场为研究对象,采用优选因子场预报模式,对盐度的时空变化进行预报试验。文中对所采用的统计预报方法,作了简要介绍。对影响本海区盐度变化的显著因子及预报结果作了初步分析。预报试验表明:预报的总体平均绝对误差为0.27‰,预报相对误差在18％左右,预报误差小于0.5‰的站数占总站数的85％,预报趋势与实测资料基本一致。     

透空式水平板波浪上托力分布

通过系列模型试验，对波浪上托力沿板宽分布进行了详细分析，提出对于透空式平板结构，发生较大冲击压强或上托力的分布主要分为均布型和局部冲击型两类，由此得到压强分布的计算公式。大量试验资料表明，该公式与实验值有着较好的一致性。     

海上浮动软管的三维静态分析

提出了海上浮动软管的三维静态分析模型。在四级海情下，对输送柴油的软管求得了解析解，得出了软管在侧向和垂直方向的偏移及其所受的拉力，认为此时的软管是不安全的。     

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.     

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.     

基于荧光原理的叶绿素a传感器校准方法研究

利用传感器对水体叶绿素a 浓度进行原位测量是获取实时、连续、长时间序列数据的重要手段。本文在对RBR 传感器和ECO（Environmental Characterization Optics）传感器进行原理分析和线性度、稳定性、重复性等基本性能测试的基础上，利用单一藻种培养液和2020年南海北部海域现场数据校准传感器，并对新的传感器校准系数进行验证。结果表明：两台传感器使用新系数比原出厂系数的叶绿素a 浓度测量准确度有明显提高。RBR 传感器现场数据校准系数的计算结果与叶绿素a 标准值误差最小，平均绝对误差从1.93 μg/L 减小到0.35 μg/L，平均相对误差从55.1%减小到10.9%；ECO 传感器藻液系数明显优于出厂系数和现场数据校准系数的计算结果，平均绝对误差从1.76 μg/L 减小到0.59 μg/L，平均相对误差从50.3%减小到15.1%。传感器测量准确度的提高，可为海洋环境监测、海洋生态灾害预警等工作获取真实可靠数据提供支撑。