裂隙(EDA)介质P波地震记录数值模拟及波场特征分析

通过对潜山面和内幕EDA介质地面地震记录数值模拟及其波场特征分析,在了解地震波场的动力学特征对裂缝介质的敏感性基础上,确定主要以振幅,其次是频率的地震波动力学特征为裂缝检测被检参数,以均方振幅与中心频率作为检验检测结果正确与否的评价参数,为建立裂缝检测方法奠定了理论基础.     

Estimation Of Sensible Heat Flux From The Surface Temperature Wave And One-Time-Of-Day Air Temperature Observation, Part Ii – Heterogeneous Surfaces

By means of the algorithm presented in Part I of this study, the temporal course H(t) and the daily mean H of the sensible heat flux H can be determined from measurements of the thermodynamic surface temperature (as a function of time) and from a one-time-of-day air temperature observation. Inaddition to these temperatures, one needs estimates of daily mean wind speed,of the roughness lengths of momentum and heat transfer, and of the displacementheight. In Part I, the algorithm was derived for areas with homogeneous surfaces,i.e., with uniform surface temperature, and the method was verified with measurements taken during several field campaigns. The root mean square error for the temperature difference between surface and air, in the comparison between measurement and model, amounted to one or two kelvin, and the error of H was 10 to 25 per cent. The method can be used to determine the sensible heat flux from measurements of surface temperatures by satellites, but can also be applied to ground based measurements.In Part II, the procedure is generalized for areas that consist of various surface types (sub-regions) with different surface temperatures, and can be usedwhen only a few (at least one) air temperature measurements per day are available over only one of the different sub-regions. This generalization should allow improvements to the estimates for H(t) by means of temperature measurements from, e.g., NOAA/AVHRR or LANDSAT/TM, taking into account the heterogeneity of the area contained in one METEOSAT pixel. Criteria are given as to whether effective (areal mean) surface temperatures and roughness lengths may be used for the computation of H or if the above mentioned generalized procedure has to be applied. The new algorithm is verified by measurements sampled during the field campaigns EFEDA 91 (Spain) and HIBE 89 (Hildesheimer Börde in Germany), and by using synthetic data (due to the lack of measured data) for one further combined surfacetype [soil and water (lakes)].     

双重介质含水层中井水位潮汐相位滞后现象的理论分析

简略地介绍了双重介质含水层模型；推导出引潮力作用下双重介质含水层中渗流运动的偏微分方程；将此泛定的方程与潜水的Boulton方程进行数学类比，从而得出一个新的迟后给水项，为解释固体潮致井水位振荡相位滞后现象奠定了物理基础；通过对该泛定方程的分析，还发现该迟后给水项与深部含水层中存在的一种潮汐液流振荡现象有关．      

青田山口叶蜡石传压介质初步研究

采用青田山口叶蜡石作为超高压高温合成金刚石的传压介质，分析了其主要化学成分和矿物组成。对青田山叶蜡石粉压块粒度效应进行了研究，确定了该传压介质的粒度组成。超高压高温人造金刚石试验表明，青田山口叶蜡石的传压介质理想，金刚石合成效果较好。     

Frequency Analysis of Heavy Tamping Vibration

ＩＮＴＲＯＤＵＣＴＩＯＮＢｅｃａｕｓｅｏｆｉｔｓｓｉｍｐｌｅｏｐｅｒａｔｉｏｎａｎｄｌｏｗｃｏｓｔａｓｗｅｌｌａｓｅｆｆｅｃ ｔｉｖｅｎｅｓｓｆｏｒｍａｎｙｐｒｏｊｅｃｔｓ ,ｈｅａｖｙｔａｍｐｉｎｇｈａｓｂｅｅｎｕｓｅｄｗｉｄｅｌｙｉｎｔｈｅｗｏｒｌｄ (Ｑｉａｎｅｔａｌ.,1986 ) .Ｈｏｗｅｖｅｒ,ｔｈｅｓｔｒｏｎｇｖｉｂｒａｔｉｏｎｉｎｓｏｉｌｍａｓｓｃａｕｓｅｄｂｙｈｅａｖｙｔａｍｐｉｎｇｍａｙｂｅｈａｒｍｆｕｌｔｏｂｕｉｌｄｉｎｇｓ,ｉｎｓｔｒｕｍｅｎｔｓａｎｄｅｖｅｎｈｕｍａｎｂｏｄｉｅｓａｒ…     

地下钻杆透层天线

对于有耗分层媒质中的垂直透层天线，建立了Ｈａｌｌｅｎ积分方程分析法的一般理论以及求取地面电场和电压的计算方法．作为应用实例，给出了地下３层媒质中钻杆天线上的电流积分方程，并对典型的地质参数进行了数值计算．所得结果和结论，与已知的理论结果和实验规律吻合。     

声波在两种多孔介质界面上的反射和透射

本文导出了声波在两种多孔介质界面上反射、透射的一般计算公式.作为例子,数值计算了P₁波入射于界面时,P₁、P₂和S波的反射、透射系数与声波频率、入射角等量之间的关系.结果表明,各种模式波的反射、透射系数与入射角、多孔介质性质有关,在Biot特征频率附近与频率有关,并用界面两侧的法向能流相等验证了结果的正确性.若把多孔介质当作均匀固体处理,将会得到显著不同的结果.     

浅议高压喷射注浆技术

高压喷射注浆技术是近年发展起来的一种基础处理新技术,它是利用高压载能介质将软弱土体冲切破碎后注入固结浆液在原位混合凝固,达到强化地基的目的。该技术多用于深层软土地基加固,建造堤坝防渗帷幕及高强度的防渗挡土墙等。本文就这项新技术及其机具设备与安装、施工程序、应用前景作了概括介绍。     

On the Parameterisation of the Effective Roughness Length for Momentum Transfer over Heterogeneous Terrain

We develop a parameterisation for the effective roughness length of terrain that consists of a repeating sequence of patches, in which each patch is composed of strips of two roughness types. A numerical model with second-order closure in the turbulent stress is developed and used to show that: (i) the normalised Reynolds stress develops as a self-similar profile; (ii) the mixing-length parameterisation is a good first-order approximation to the Reynolds stress. These findings are used to characterise the blending layer, where the stress adjusts smoothly from its local surface value to its effective value aloft. Previous studies have assumed that this adjustment occurs abruptly at a single level, often called the blending height. The blending layer is shown to be characterised by height scales that arise naturally in linear models of surface layer flow over roughness changes, and calculations with the numerical model show that these height scales remain appropriate in the nonlinear regime. This concept of the blending layer allows the development of a new parameterisation of the effective roughness length, which gives values for the effective roughness length that are shown to compare well with both atmospheric measurements and values determined from the second-order model.     

平行走滑断层相互作用的粘弹模型和减震作用

研究了二维粘弹性介质中平行走滑断层的相互力学作用及其地震活动性的影响。当一条断层发生滑动,将导致平行断层面上剪切应力减小,因此,可能推迟平行断层发生滑动,推迟时间在几年至几百年的范围内,这取决于发生滑动的断层与平行断层之间的距离,以及平行断层自身应力积累孕育地震过程经历的时间。