新安县自动气象站报文传输质量分析

根据新安县自动站报文传输情况，分析了影响传输质量的因子，并提出提高报文传输质量的措施。     

哈尔滨大顶子山航电枢纽工程蓄水后引起的浸没地质灾害研究

哈尔滨市松北区大顶子山航电枢纽工程蓄水后，哈尔滨段的江水位将常年保持在116m，比枯水期水位高出6m多。届时势必要引起松北区地下水水位的壅高，导致发生区内浸没问题。利用GMS（地下水流模拟系统）软件中SOLID模块，采用钻孔间插值法建立松北区含水系统三维立体模型，进行地下水壅高计算，给出地下水位临界深度，确定研究区内浸没范围；进行浸没评价，提出浸没危害治理工程措施。     

Numerical simulation of ground anchors

A procedure of finite-element modeling and beam-column modeling of ground anchors was proposed in this study to investigate the load transfer mechanism in ground anchors. The procedure included the modeling of soil, grout, and strand tendon and the interface modeling of soil–grout and grout–strand in ground anchors. A series of finite element analyses and beam-column analyses were performed using the proposed models on ground anchors. The numerical predictions were compared with observed measurements in a field load test. The results indicated that the numerical simulation of load transfer mechanism on ground anchors can provide reasonable predictions.     

Turbidite bed thickness distributions: methods and pitfalls of analysis and modelling

Turbidite bed thickness distributions are often interpreted in terms of power laws, even when there are significant departures from a single straight line on a log–log exceedence probability plot. Alternatively, these distributions have been described by a lognormal mixture model. Statistical methods used to analyse and distinguish the two models (power law and lognormal mixture) are presented here. In addition, the shortcomings of some frequently applied techniques are discussed, using a new data set from the Tarcău Sandstone of the East Carpathians, Romania, and published data from the Marnoso‐Arenacea Formation of Italy. Log–log exceedence plots and least squares fitting by themselves are inappropriate tools for the analysis of bed thickness distributions; they must be accompanied by the assessment of other types of diagrams (cumulative probability, histogram of log‐transformed values, q–q plots) and the use of a measure of goodness‐of‐fit other than R², such as the chi‐square or the Kolmogorov–Smirnov statistics. When interpreting data that do not follow a single straight line on a log–log exceedence plot, it is important to take into account that ‘segmented’ power laws are not simple mixtures of power law populations with arbitrary parameters. Although a simple model of flow confinement does result in segmented plots at the centre of a basin, the segmented shape of the exceedence curve breaks down as the sampling location moves away from the basin centre. The lognormal mixture model is a sedimentologically intuitive alternative to the power law distribution. The expectation–maximization algorithm can be used to estimate the parameters and thus to model lognormal bed thickness mixtures. Taking into account these observations, the bed thickness data from the Tarcău Sandstone are best described by a lognormal mixture model with two components. Compared with the Marnoso‐Arenacea Formation, in which bed thicknesses of thin beds have a larger variability than thicknesses of the thicker beds, the thinner‐bedded population of the Tarcău Sandstone has a lower variability than the thicker‐bedded population. Such differences might reflect contrasting depositional settings, such as the difference between channel levées and basin plains.     

Non-destructive estimation of potato leaf chlorophyll from canopy hyperspectral reflectance using the inverted PROSAIL model

Optimizing nitrogen (N) fertilization in crop production by in-season measurements of crop N status may improve fertilizer N use efficiency. Hyperspectral measurements may be used to assess crop N status by estimating leaf chlorophyll content. This study evaluated the ability of the PROSAIL canopy-level reflectance model to predict leaf chlorophyll content. Trials were conducted with two potato cultivars under different N fertility rates (0–300 kg N ha⁻¹). Canopy reflectance, leaf area index (LAI) and leaf chlorophyll and N contents were measured. The PROSAIL model was able to predict leaf chlorophyll content with reasonable accuracy later in the growing season. The low estimation accuracy earlier in the growing season could be due to model sensitivity to non-homogenous canopy architecture and soil background interference before full canopy closure. Canopy chlorophyll content (leaf chlorophyll content × LAI) was predicted less accurately than leaf chlrophyll content due to the low estimation accuracy of LAI for values higher than 4.5.     

On the link between GPS pseudorange noise and day-boundary discontinuities in geodetic time transfer solutions

When neglecting calibration issues, the accuracy of GPS-based time and frequency transfer using a combined analysis of code and carrier phase measurements highly depends on the noise of the GPS codes. In particular, the pseudorange noise is responsible for day-boundary discontinuities which can reach more than 1 ns in the time transfer results obtained from geodetic analysis. These discontinuities are caused by the fact that the data are analyzed in daily data batches where the absolute clock offset is determined by the mean code value during the daily data batch. This pseudorange noise is not a white noise, in particular due to multipath and variations of instrumental delays. In this paper, the pseudorange noise behavior is characterized in order to improve the understanding of the origin of the large day-boundary discontinuities in the geodetic time transfer results. In a first step, the effect of short-term noise and multipath is estimated, and shown to be responsible for only a maximum of 150 ps (picoseconds) of the day-boundary jumps, with only one exception at NRC1 where the correction provides a jump reduction of 300 ps. In a second step, a combination of time transfer results obtained with pseudoranges only and geodetic time transfer results is used to characterize the long-term evolution of pseudorange errors. It demonstrates that the day-boundary jumps, especially those of large amplitude, can be explained by an instrumental effect imposing a common behavior on all the satellite pseudoranges. Using known influences as temperature variations at ALGO or cable damages at HOB2, it is shown that the approach developed in this study can be used to look for the origin of the day-boundary discontinuities in other stations.     

Transfer processes in a simulated urban street canyon

The transfer processes within and above a simulated urban street canyon were investigated in a generic manner. Computational fluid dynamics (CFD) was used to aid understanding and to produce some simple operational parameterisations. In this study we addressed specifically the commonly met situation where buoyancy effects arising from elevated surface temperatures are not important, i.e. when mechanical forces outweigh buoyancy forces. In a geophysical context this requires that some suitably defined Richardson number is small. From an engineering perspective this is interpreted as the important case when heat transfer within and above urban street canyons is by forced convection. Surprisingly, this particular scenario (for which the heat transfer coefficient between buildings and the flow is largest), has been less well studied than the situation where buoyancy effects are important. The CFD technique was compared against wind-tunnel experiments to provide model evaluation. The height-to-width ratio of the canyon was varied through the range 0.5–5 and the flow was normal to the canyon axis. By setting the canyon’s facets to have the same or different temperatures or to have a partial temperature distribution, simulations were carried out to investigate: (a) the influence of geometry on the flow and mixing within the canyon and (b) the exchange processes within the canyon and across the canyon top interface. Results showed that the vortex-type circulation and turbulence developed within the canyon produced a temperature distribution that was, essentially, spatially uniform (apart from a relatively thin near-wall thermal boundary layer) This allowed the temperatures within the street canyon to be specified by just one value T _can , the canyon temperature. The variation of T _can with wind speed, surface temperatures and geometry was extensively studied. Finally, the exchange velocity u _E across the interface between the canyon and the flow above was calculated based on a heat flux balance within the canyon and between the canyon and the flow above. Results showed that u _E was approximately 1% of a characteristic wind velocity above the street canyon. The problem of radiative exchange is not addressed but it can, of course, be introduced analytically, or computationally, when necessary.     

利用多角度POLDER偏振资料实现陆地上空大气气溶胶光学厚度和地表反照率的同时反演 I. 理论与模拟

陆地上空标量辐射对地表反射率和大气气溶胶散射都具有很强的敏感性,而偏振反射只对大气气溶胶敏感,对地表不敏感。根据这个原理并结合POLDER(POLarization and Directionality of Earth Reflectance)资料的特点,作者提出综合利用标量辐射和偏振反射信息来实现陆地上空大气气溶胶和地表反照率的同时反演。首先,利用多角度偏振辐射观测提取大气气溶胶光学参数,再利用标量辐射测量对偏振反演结果作进一步筛选和订正,同时获得地表反射率。数值模拟试验结果证明,仅利用偏振信息只能获取大气气溶胶信息,而且其结果误差较大,特别是对于散射作用较强的短波长通道如670 nm误差更大,但经过标量辐射订正后的结果得到明显改善,气溶胶光学厚度和地表反射率与真实值之间相关系数都达到0.99以上。为提高查找表的计算效率,提出并建立了反演方案所需要的半参数化数值表,利用内插方法寻求气溶胶光学厚度和地表反射率的数值解的反演方法。     

无线GIS空间数据动态副本管理研究

针对GIS海量空间数据更新要求，研究了无线网络环境下空间数据传输和存储的副本动态复制与管理技术。通过分析空间数据移动复制服务策略，设计了基于无线网络的动态副本管理系统（DRMS）来实现空间数据的移动动态复制，并研究副本管理模型和副本更新算法，保证了无线网络传输的稳定性。     

卫星光学相机MTF在轨检测方法研究

调制传递函数是反映卫星光学相机成像性能的重要参数,针对调制传递函数多种在轨检测方法,本文在分析了可利用地面景物的基础上,结合目前卫星光学相机分辨率不断提高的现状,着重从原理和方法上介绍了利用不同亮度地块接壤的地面靶标进行检验的刃边法,同时依据实验研究成果,介绍了对原始刃边数据拟合和调制传递函数的频谱增密技术,这些技术对提高调制传递函数获取精度具有重要的作用。