178Hz正弦波对刺参行为、呼吸及免疫应答的影响

根据山东荣成沿岸风电机组产生的声波范围选取其中178Hz的峰值声音,声压级控制于(85±5)d B,在实验室水槽中,采用实验生态学方法研究了178Hz声波影响下的刺参(Apostichopus japonicus)幼参的行为反应、耗氧率以及体腔液抗氧化酶(CAT、SOD)浓度的变化。通过平均聚集率的变化比较,发现刺参对178Hz的声波胁迫环境的行为反应敏感;利用空瓶法测得幼参耗氧率显著低于对照组(P0.05);通过测定刺参体腔液免疫活性发现在该频率声波干扰下的刺参CAT活性显著高于对照组(P0.05),而SOD活性于对照组差异不明显(P0.05)。研究结果说明声波对刺参幼参的呼吸和免疫会产生明显影响,可为我国近海刺参养殖和风电发展策略提供参考。     

垂荡式波浪能装置运动模型数值分析

垂荡式波浪能装置在海洋可再生能源开发中被广泛应用,通过浮子与摇杆在垂荡方向的相对运动吸收波浪能。在以往相关的运动预报数值分析中,通常基于微幅波假设,仅考虑浮子与摇杆在垂荡方向的运动,忽略摇杆其他自由度运动。建立并求解了垂荡式波浪能装置的非线性联合运动方程组,分析垂荡式波浪能装置的波浪载荷、浮子与平台连接处的受力情况。数值计算系统的运动响应,并将计算结果与已有的试验数据进行比较验证,结果表明数值模拟的垂荡式波能装置的运动响应与试验结果相符合。最后,应用本计算方法分析PTO(power take-off)参数对波能装置发电性能的影响。     

中国城市流动人口户籍迁移意愿的空间格局及影响因素——基于2012年全国流动人口动态监测调查数据

基于2012年全国流动人口动态监测调查数据和相关统计年鉴数据,对中国地级以上城市流动人口的户籍迁移意愿、空间格局及影响因素进行了系统分析。研究发现,中国城市流动人口户籍迁移意愿的整体水平并不高;等级高、规模大的城市流动人口的户籍迁移意愿高,而等级低、规模小的城市流动人口的户籍迁移意愿低;沿海城市群流动人口的户籍迁移意愿高,其他城市流动人口的户籍迁移意愿低,但内陆部分省会城市和交通区位与资源禀赋较好的中小城市也已经形成了一批流动人口的户籍迁移意愿高值区。中国城市流动人口户籍迁移意愿的空间分布特征受到流入城市和流动人口自身双重力量的影响,流入城市因素的正向影响作用大于流动人口自身因素。其中,流入城市的社会、经济发展水平和流动人口在流入城市的社会融合程度是核心要素,对城市流动人口户籍迁移意愿的提升具有正向的促进作用,而流动人口过于集中在次级劳动力市场的就业特征和较高的家庭财富与收入对户籍迁移意愿的提升却具有显著的抑制作用。最后,提出了相关政策启示。     

FD-600全液压动力头反循环连续取样钻机研制与应用

文章结合国内外CSR取心技术的现状和所生产钻机的特点,为满足国内对空气反循环连续取样（心）、冲击回转、定向钻进等多种高效钻探工艺对钻机的需要,从钻机整体结构设计、整体布局进行详细考量,采用质量可靠的液压件、动力机等外购件,摒弃传统钻机设计周期长、动力小、机械化程度低、对地形和钻探工艺适应性低等特点,研制出了一台高效、可靠、机械化程度较高的FD-600型全液压动力头式反循环取样钻机。在3次野外生产试验中充分体现出了优越性,可满足砂金勘探、工程施工等取心钻探的要求。     

Seismicity and fault aseismic deformation caused by fluid injection in decametric in-situ experiments

Seismicity induced by fluid perturbations became an important societal concern since felt earthquakes (M_w up to 6) occurred after anthropogenic activities. In order to mitigate the risks associated with undesired seismicity, as well as to be able to use the micro-seismicity as a probe for in-depth investigation of fluid-driven processes, it is of crucial importance to understand the links between seismicity, fluid pressure and flow. We have developed a series of in-situ, decameter-scale experiments of fault zone reactivation by controlled fluid injection, in order to improve the near-source geophysical and hydromechanical observations. The deployed geophysical monitoring close to the injection allows one to cover the full frequency range of the fault responses from the static deformation to the very high-frequency seismic emissions (up to 4 kHz). Here, we focus on the microseismicity (M_w ∼ –4 to –3) recorded during two fluid injection experiments in low-permeable shale and highly-fractured limestone formations. In both experiments, the spatio-temporal distribution of the seismic events, the energy balance, and the seismic velocity changes of the fractured medium show that most of the deformation does not actually emit seismic signals. The induced deformation is mainly aseismic. Based on these high-resolution multiparametric observations in the near-field, we therefore proposed a new model for injection-induced seismicity: the seismicity is not directly induced by the increasing fluid pressure, but it is rather triggered by the stress perturbations transferred from the aseismic motion caused by the injection.     

Electrical analogy for modelling thermal regime and moisture distribution in sandy soils

The soil mass is subjected to temperature variation due to several human activities (viz. tanks storing heated fluids, buried cables and pipelines, air-conditioning ducts, disposal of nuclear and thermal power plant wastes etc.), which result in heat-induced migration of the moisture in it. Though several studies have been conducted in the past to investigate the mechanism of heat migration through the soil mass, a methodology for ‘real-time measurement of the variations in temperature, flux and moving moisture front, in tandem, with respect to space' has rarely been attempted. In this context, extensive laboratory investigations were conducted to measure real-time flux and temperature variations in the sandy soils, and the validation of results has been done by employing an equivalent electrical circuit programme, LTspice. Subsequently, a mathematical model PHITMDS (i.e. Prediction of Heat-Induced Temperature and Moisture Distribution in Soil) has been developed and its utility and efficacy, for predicting the depth-wise temperature and heat-induced moisture migration, due to evaporation, in terms of position of moving moisture front in the sandy soil has been critically discussed and demonstrated.     

Rainfall flood hazard at nuclear power plants in India

Flood hazard evaluation is an important input for Nuclear Power Plants external events safety studies. In the present study, flood hazard at various nuclear sites in India due to rainfall has been evaluated. Hazard estimation is a statistical procedure by which rainfall intensity versus occurrence frequency is estimated from historical records of rainfall data and extrapolated with asymptotic extreme value distribution. Rainfall data needed for flood hazard assessment are daily annual maximum rainfall (24?h data). The observed data points have been fitted using Gumbel, power law and exponential distribution, and return period has been estimated. To study the stationarity of rainfall data, a moving window estimate of the parameters has been performed. The rainfall pattern is stationary in both coastal and inland regions over the period of observation. The coastal regions show intense rainfall and higher variability than inland regions. Based on the plant layout, catchment area and drainage capacity, the prototype fast breeder reactor (PFBR) site is unlikely to be flooded.     

The geothermal formation mechanism in the Gonghe Basin: Discussion and analysis from the geological background

The Gonghe Basin, a Cenozoic down-warped basin, is located in the northeastern part of the Qinghai-Xizang (Tibetan) Plateau, and spread over important nodes of the transfer of multiple blocks in the central orogenic belt in the NWW direction. It is also called “Qin Kun Fork” and “Gonghe Gap”. The basin has a high heat flow value and obvious thermal anomaly. The geothermal resources are mainly hot dry rock and underground hot water. In recent years, the mechanism of geothermal formation within the basin has been controversial. On the basis of understanding the knowledge of predecessors, this paper proposes the geothermal formation mechanism of the “heat source–heat transfer–heat reservoir and caprock–thermal system” of the Gonghe Basin from the perspective of a geological background through data integration-integrated research-expert, discussion-graph, compilation-field verification and other processes: (1) Heat source: geophysical exploration and radioisotope calculations show that the heat source of heat in the basin has both the contribution of mantle and the participation of the earth’s crust, but mainly the contribution of the deep mantle. (2) Heat transfer: The petrological properties of the basin and the exposed structure position of the surface hot springs show that one transfer mode is the material of the mantle source upwells and invades from the bottom, directly injecting heat; the other is that the deep fault conducts the deep heat of the basin to the middle and lower parts of the earth’s crust, then the secondary fracture transfers the heat to the shallow part. (3) Heat reservoir and caprock: First, the convective strip-shaped heat reservoir exposed by the hot springs on the peripheral fault zone of the basin; second, the underlying hot dry rock layered heat reservoir and the upper new generation heat reservoir and caprock in the basin revealed by drilling data. (4) Thermal system: Based on the characteristics of the “heat source-heat transfer-heat reservoir and caprock”, it is preliminarily believed that the Gonghe Basin belongs to the non-magmatic heat source hydrothermal geothermal system (type II2₁) and the dry heat geothermal system (type II2₂). Its favorable structural position and special geological evolutionary history have given birth to a unique environment for the formation of the geothermal system. There may be a cumulative effect of heat accumulation in the eastern part of the basin, which is expected to become a favorable exploration area for hot dry rocks.     

长江三角洲北岸土体工程地质层组划分及其应用

鉴于研究区工程地质层划分标准尚不统一,不利于工程地质资料的交流和资料的社会化利用。为提高研究区工程地质资料的通用性,结合研究区11个1∶50000标准图幅工程地质调查工作,以100m以浅的土体为工程地质层组划分对象,考虑沉积时代、沉积环境、土体结构特征和物理力学参数,建立研究区基本地层结构层序和编码,将研究区土体划分为7个工程地质层组和21个工程地质层。通过工程地质层组的建立,找出了大区域工程钻孔土层的对应关系,使区域地层资料对比分析成为可能,有助于地质模型的概化和抓住工程地质问题。采用物理力学参数离散性、绘制的地质剖面和三维型分析了工程地质层组划分的合理性,证实了层组划分结果合理正确。通过工程地质层组划分,找出了2个软弱敏感层和4个优势持力层。本文的成果对长江北岸三角洲地区的工程勘察、城市规划和建设项目选址论证具有一定的指导意义。     

On the origin of bleaching phenomena in red bed sediments of Triassic Buntsandstein deposits in Central Germany

The Lower Triassic Buntsandstein in Central Germany comprises one of the major clastic, lithified hydrocarbon reservoirs, it is a major groundwater aquifer and it is considered as a potential underground gas storage lithology. Thus, sandstones of the Buntsandstein from Thuringia and NE Hesse were used to analyse their geochemical composition combined with mineralogical data in order to investigate the origin of several bleaching phenomena in primary red beds, since these give a hint for mineral alteration, mineral formation and mineral reactivity in the course of fluid-rock-interactions. This is relevant for e.g. recent Carbon Capture and Storage (CCS) efforts. The origin of the observed bleaching phenomena is diverse and it is linked to certain stages of diagenesis and different episodes of fluid flow: (1) eodiagenetic bleaching coupled with palaeosoil formation and iron mobilisation, (2) mesodiagenetic bleaching as a result of hydrocarbon migration, (3) Tertiary bleaching due to CO₂ degassing from Miocene volcanism, (4) Tertiary telodiagenetic bleaching due to weathering under humid climate conditions, and (5) weathering processes related to recent telodiagenesis/pedogenesis. This study emphasizes the multiple nature of fluids, which can induce iron mobilisation and bleaching of red beds.