规则波作用下台阶地形上墩柱绕流三维数值研究

利用Flow-3D建立三维数值波浪水槽,模拟波浪在不对称台阶地形上的传播。系统研究规则波作用下墩柱周围水流的流动特性,分析墩柱周围的瞬时速度场、涡量场以及KC值变化,不同相位时墩柱前、后水平流速分布情况。结果表明:波浪在台阶地形传播的过程中,墩柱迎水面的涡动结构不够明显;高涡量呈对称状聚集在墩柱的背水面,并形成一对旋转方向相反的涡结构;周期对KC值的影响比波高的影响要明显;墩柱迎水面水平方向流速变化较大,侧面水平流速变化最为剧烈,背面由于受到墩柱的掩护作用水平方向流速变化不大,在墩柱的正面和侧面竖向环流明显。     

环抱式防波堤口门航道横流三维特性研究

环抱式防波堤口门易出现较大横流,且三维特性明显。针对连云港主港区深水航道,建立三维潮流数学模型,并用现场航槽实测资料进行验证,在此基础上计算分析了不同潮差条件下口门段进港航道横流的三维特性。研究结果表明:最大横流约出现在高潮位前1.5 h,自表层至底层相继出现,且表、底层出现时刻仅相差0.5 h;因航道边坡较小,最大横流时未见水流分离现象,航槽底部没有反向流;各层最大横流值均与涨潮潮差有关,且相关程度高;航道内最大横流垂向分布梯度随潮差增加略有增大。     

琼东南盆地深水区构造热演化特征及其影响因素分析

To reveal the tectonic thermal evolution and influence factors on the present heat flow distribution, based on 154 heat flow data, the present heat flow distribution features of the main tectonic units are first analyzed in detail, then the tectonic thermal evolution histories of 20 profiles are reestablished crossing the main deep-water sags with a structural, thermal and sedimentary coupled numerical model. On the basis of the present geothermal features, the Qiongdongnan Basin could be divided into three regions: the northern shelf and upper slope region with a heat flow of 50–70 m W/m2, most of the central depression zone of 70–85 m W/m2, and a NE trending high heat flow zone of 85–105 m W/m2 lying in the eastern basin. Numerical modeling shows that during the syn-rift phase, the heat flow increases generally with time, and is higher in basement high area than in its adjacent sags. At the end of the syn-rift phase, the heat flow in the deepwater sags was in a range of 60–85 m W/m2, while in the basement high area, it was in a range of 75–100 m W/m2. During the post-rift phase, the heat flow decreased gradually, and tended to be more uniform in the basement highs and sags. However, an extensive magmatism, which equivalently happened at around 5 Ma, has greatly increased the heat flow values, and the relict heat still contributes about 10–25 m W/m2 to the present surface heat flow in the central depression zone and the southern uplift zone. Further analyses suggested that the present high heat flow in the deep-water Qiongdongnan Basin is a combined result of the thermal anomaly in the upper mantle, highly thinning of the lithosphere, and the recent extensive magmatism. Other secondary factors might have affected the heat flow distribution features in some local regions. These factors include basement and seafloor topography, sediment heat generation, thermal blanketing, local magmatic injecting and hydrothermal activities related to faulting and overpressure.     

Molecular ecological study of <Emphasis Type="Italic">Siganus spinus</Emphasis> and <Emphasis Type="Italic">S. guttatus</Emphasis> from Okinawan waters based on mitochondrial DNA control region sequences

The mitochondrial DNA (mtDNA) control region was sequenced to examine the genetic variability and gene flow of juvenile Siganus spinus and S. guttatus. In total, 461 nucleotide sequences were obtained from 69 specimens of juvenile S. spinus from Okinawa Island and Ishigaki Island, in which 17 variable sites and 22 haplotypes were identified. Haplotype diversity (h) was high (0.9244 in Okinawa and 0.8984 in Ishigaki), whereas nucleotide diversity (π) was low (0.0063 in Okinawa and 0.0059 in Ishigaki). The two populations were not genetically distinct. Siganus guttatus, which do not form large schools at recruitment, in contrast S. spinus, were also analyzed by studying 152 individuals collected off Okinawa Island, Miyako Island, and Ishigaki Island. Of 476 nucleotide sequences, 50 were variable, and 42 haplotypes were identified. Genetic variability values were high (h = 0.8766 and π = 0.0151 in Okinawa; h = 0.9640 and π = 0.0192 in Miyako; h = 0.9161 and π = 0.0199 in Ishigaki). The Okinawa population was genetically isolated from the Miyako and Ishigaki populations. As a result, genetic diversity was high for each of these siganid populations despite their being target species for fisheries; however, the degree of inter-population gene flow was higher for S. spinus than S. guttatus, suggesting that these species exhibit different dispersal strategies.     

A control-volume finite-element method for three-dimensional multiphase basin modeling

In this paper we describe a 3D control-volume finite-element method to solve numerically the coupled partial differential equations (PDEs) governing geological processes involved in the evolution of sedimentary basins. These processes include sediment deposition and deformation, hydrocarbon generation, multiphase fluid flow, and heat transfer in deforming porous media.     

西太平洋雅浦海沟区海底热流原位测量

为了解西太平洋雅浦海沟区俯冲带及岛弧两侧的海底热流分布情况,2015年1-3月期间的西太平洋海山航次中,"科学"号利用最新一代Lister型热流探针对该区域开展了海底热流原位测量工作。沿着横跨俯冲带的站位测线,本次进行了10个热流站位测量,共获得8个站位的有效数据。测量结果表明,该地区地温梯度的变化范围为0.011~0.137 Km-1,平均0.089 Km-1,热导率的变化范围为0.58~1.32 Wm-1K-1,热流值则在14.4~118.85 mWm-2之间,平均为68.02 mWm-2。热流值分布显示,雅浦岛弧附近具有较高的热流值,自雅浦岛弧向两侧热流值逐渐降低,低热流区主要分布在帕里西维拉海盆。由于该地区热流测量数据依然稀缺,深入的讨论有待进一步研究。     

Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier?Stokes Equations (RANSE) for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a body-fixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models (TCMs), the RNG model with wall functions and curvature correction and the Shear Stress Transport (SST) model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×106 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.     

Protection of marine birds and turtles at St Brandon’s Rock,Indian Ocean,requires conservation of the entire atoll

A survey of seabirds and turtles at St Brandon’s Rock, 400 km north of Mauritius, was undertaken in 2010. We estimated that 1 084 191 seabirds comprising seven breeding species and excluding non-breeders were present at the archipelago and we counted 279 turtle tracks and nesting pits of green turtles Chelonia mydas. Hawksbill turtles Eretmochelys imbricata were also present. Analyses of 30 different islets that make up the atoll showed that the seabird species mostly partitioned their use of islets based on islet size, with four species preferring larger islets and two species preferring smaller islets. Alien species introduced historically are still present and other threats, such as shipwrecks, remain. We propose conservation and other measures that should adequately protect the birds, turtles and coral reef by treating the atoll as a system.     

Time-domain simulation of berthing problem between FPSO and shuttle tanker in waves

A time-domain simulation method based on potential flow model has been developed to investigate the berthing problem between two floating bodies in wave. The boundary value problem is formulated with respect to an earth-fixed coordinate system because the relative positions of the two vessels continuously change during the berthing operation. The classical finite element method is used to solve the Laplace equation in the fluid domain with moving boundary. The linearized free-surface boundary conditions are integrated in time by applying 4th-order Adams–Bashforth–Moulton method. A simple re-mesh algorithm with local and global mesh systems is introduced to update mesh by considering large horizontal movement of the berthing vessel. The developed numerical method is used to investigate the berthing problem between a FPSO and shuttle tanker in waves. The focus is on the wave-induced motion response during the berthing process. The characteristics of the motion responses in berthing operation are examined with various wave frequencies, berthing speeds and wave headings.