宏观地震忽略吸收确定震源深度问题的通解及其精确度

分析G-R-闵公式后得出,它是从点源幅射场导出的,与地震宏观场不相应。因在近场震源不能视作点源。在分析过程中,导出相当于点源、线源或面源以及复杂源的幅射场的深度公式。对实际的地震,它的源类型一无所知,所以不预作假定,将源指标几何扩散率n作为待定参数,导出了一个物理意义明确而又普遍化的震源深度公式。此公式的诸解法中,以计算方法准确、精度高,作图法有直观的优点,但准确性差、精度低,图算法只作获取粗略值和考察数据均匀性用。计算了9个8级以上巨震、1个71/2大震,和两个M_L=3的有感地震的震源深度,经对比结果很好,利用计算得出震源类型,结合宏观场研究了这些地震的震源几何学。并且首次在国际上给出宏观地震震源深度值的标准误差。     

Moment tensor inversion of some aftershocks of the April 18, 1985 Luquan earthquake of Yunnan Province, China

Based on the three component accelerograms, recorded at near-field distance by a temporary seismic network consisting of digital cassette tape recording accelerographs, the focal mechanisms of three aftershocks of the April 18, 1985, Luquan, Yunnan Province, China, earthquake ofM _S=6.1, are calculated using seismic moment tensor inversion technique. The phases of direct P, S and converted SP waves in the displacement seismograms, produced by twice integrations of the observed accelerograms, are identified via forward calculation using Green’s functions for homogeneous semi-infinite elastic medium, and used in the inversion. The results of inversion show that a better fit of synthetic to the observed seismograms of direct as well as converted phases can be achieved if appropriate weighting functions are used in solving the over definite linear equations. While these aftershocks are of different magnitudes (M _L=4.8, 3.2 and 3.5, respectively) and hypocentral locations, their focal mechanisms are very similar and consistent with that of the main shock. This feature demonstrates the intrinsic correlation between the occurrence of aftershocks and the seismogenic fault of main shock. Our experimentations show that using the near field accelerogram obtained from the digital seismic network with appropriate azimuthal coverage on the focal sphere, with the aid of even simple medium model, not only the shear dislocation source, but also the isotropic part and CLVD (compensated linear vector dipole) can be retrieved by the technique of moment tensor inversion. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 412–419, 1991. This work is supported by the Chinese Joint Seismological Sciences Foundation and the Western Yunnan Earthquake Prediction Test Site (WYEPTS), State Seismological Bureau.     

控制岩体活动的地质因素分析

本文对控制岩体活动的地质因素—岩性、岩体结构、结构面、地应力和水文地质条件等进行了分析。岩性、岩体结构是产生岩体活动的内因。本文将岩体结构划分为六种类型,即整体结构、块状结构、层状结构、碎裂结构、镶嵌结构和散体结构。并对控制岩体稳定性的结构面进行了研究和分类,指出不同结构面对岩体活动的具体影响。通过各种控制岩体活动的地质因素分析,掌握岩体活动规律,对予防灾害性岩体活动,防患于未然有实际意义。     

航磁ΔT平面归一化总梯度方法及其在内蒙陆西凹陷的应用

本文首次提出将剖面归一化总梯度方法推广到平面加以应用,得到平面归一化总梯度方法,并根据剖面归一化总梯度的计算公式相应地推导了平面归一化总梯度的计算公式,将其应用到内蒙陆西凹陷探测油气田,取得了一定的地质效果。     

Applications of seismic moment tensor inversion in fast response to earthquakes

IntroductionAfteramoderateorstronger(Ms25.0)earthquake,themosturgentworkofthedivisionforearthquakemonitoringandpredictionistodetermineitstimeoforigin,hypocentrallocation(longitude,latitudeanddepth)andmagnitudeandtojudgethetrendofseismicregimedevelopmentassoonaspossible.Ingeneralcases,whenanearthquakewithMS25.0insideChinaoraonewithMS26.0inneighboringareasofChinahasoccurred,theEarthquakeBulletinofChineseSeismologicalNetworkcanprovidedeterminationoftheorigintime,hypocentrallocation(longitude,…     

同向圆射流混合特性实验研究

利用声学多普勒流速仪(Acoustic Doppler Velocimetry,ADV)自动测速系统和平面激光诱导荧光(Plane Laser Induced Florescence,PLIF)系统对同向圆射流的速度场和浓度场进行了系统的研究,并与前人的工作进行了比较和讨论。时均特性测量结果表明,射流主体段下游各断面的速度和浓度横向分布是自相似的,且近似可用高斯分布来表示;随着射流向下游传播,射流中心流速逐渐衰减,在强射流区和弱射流区遵循不同的规律;紊动特性测量结果表明,下游各断面的紊动强度横向分布是自相似的。     

一种根据曲率变化检校畸变差的方法

提出了基于曲率变化的畸变差检校方法。首先对影像上提取的直线进行二分，根据重新匹配出的直线可确定实际物方直线在影像上的投影因镜头畸变而产生弯曲的程度，以此可对镜头的畸变进行检校。但对于镜头畸变较大的情况二分直线无法检测出实际曲线的弯曲程度，因此，需要对所有共线的直线进行分组，由每组直线来确定实际曲线的弯曲程度，检校镜头畸变，从而消除其对影像的影响。实验证明，通过这种方法对镜头畸变进行检校，能够得到较好的结果。     

Surface motion of a semi-cylindrical hill for incident plane SV waves： Analytical solution

Introduction Scattering of incident waves by local topographies is one of the most attractive topics in the field of engineering seismology. They can be resolved by either a numerical method or an analyti-cal method. The numerical methods include finite difference method, finite element method, boundary element method, etc. The analytical method is the wave function expansion method. Al-though numerical methods can be used for arbitrary-shaped topographies, the analytical solutions are still …     

2005年10月巴基斯坦MW7.6地震对余震的触发研究

本文研究分析了2005年10月8日巴基斯坦主震产生的库仑破裂应力变化对余震的影响。计算时考虑了以下因素：（1）断层泥区域的孔隙流体压力和介质弹性常数与周围介质中的不同；（2）地震震源区的构造应力场方向；（3）将震源区构造应力和主震破裂产生的应力叠加计算得到余震破裂机制。该研究考虑了多种因素，计算结果与余震的分布比较吻合。结果表明2005年10月8日巴基斯坦主震对大部分余震有触发作用。