大青山逆冲推覆构造形成演化过程的流体证据

大青山逆冲断层带内热液脉体十分发育,按其产状可划分为充填脉和边缘脉。根据形成时间主要划分为3期:早期石英脉、中期石英脉和晚期方解石脉。早期石英脉中流体包裹体类型较为复杂,见有气液两相、含CO2三相、纯CO2及少量单液相等4种类型原生包裹体,分析表明流体主要来源于地壳深部或上地幔。中期石英脉中主要发育气液两相包裹体和少量单液相包裹体,流体主要来源于大气降水,并且有少量岩浆热液混入。晚期方解石脉内仅含有气液两相包裹体及少量的单液相包体,流体主要来源于层间建造水。根据逆冲变形事件期次、时间,结合热液脉体形成深度数据,确定了大青山逆冲推覆体系变形演化历史:印支期逆冲推覆事件发生在地壳7～8 km深度,燕山中期逆冲推覆事件发生在3～6 km范围内,而燕山晚期逆冲推覆事件发生近地表2 km范围内。     

广西水岩坝矿田成矿构造演化及脉型矿床的构造控矿机制研究

位于桂东北姑婆山复式岩体西南接触带的水岩坝锡钨矿田，其主要矿床在控矿因素上具有以构造控矿为主导因素的特点，本文通过对矿田内主干断裂的岩组运动学、动力学及变形岩石有限应变分析。对本区自地洼区阶段以来，燕山期花岗岩体的侵入所造成的矿田构造格局进行了系统的研究；然后．根据烂头山黑钨石英脉型矿床的特征，按脆－韧性剪切的原理，从递进变形的角度指出本区脉型矿床的成矿规律．模式和找矿方向，并提出该矿床为构控型多因复成矿床。     

砂宝斯金矿区多矿物脉特征及其对砂岩的改造

砂宝斯矿区的成矿围岩为长石石英砂岩，砂岩被多期次的石英脉、方解石脉和高岭石脉所穿切，这些多矿物脉是热液流体运移的结果。矿物脉形成过程中对围岩进行了热改造，使砂岩发生了压溶作用、胶结作用和溶蚀作用，形成了蚀变砂岩。由于流体酸碱性和温压的变化，孔隙水介质的性质由酸性向碱性转变，在酸性成岩环境下形成的蚀变高岭石、伊利石将转变成绿泥石、绢云母等。绢云母的大量出现，石英次生加大和自生粘土矿物的形成均是热液流体活动的产物。     

伏牛山构造带变质流体脉变形特征及构造意义

伏牛山构造带由多条近平行的断裂带和夹持其间的变形岩片组成,洛南-栾川断裂带和瓦穴子-乔端断裂带为其中的两条主要断裂带。这两条断裂带虽遭受多期强烈构造活动的影响,但主造山期的构造特征至今仍然保存完好,并以中深层次的韧性剪切变形为主,形成了典型的糜棱岩和同构造期石英脉。本文从宏观、微观、超微观变形特征及年龄等方面对这些变质流体脉进行了研究,以探讨与其形成密切相关的构造活动特征、年代及其在秦岭造山带和华北板块南缘强变形带中的作用。石英脉中石英颗粒动态重结晶特征总体显示远离剪切带只有少量的膨凸式,靠近断裂带为亚颗粒式,形成核-幔结构,位错特征显示远离剪切带位错密度较小,靠近断裂带较大,位错形态显示瓦乔断裂带以挤压为主,洛南-栾川断裂带以剪切为主。两条断裂带石英脉的变形特征说明它们的糜棱岩化过程均为塑性变形中的晶质塑性变形,形成过程均为挤压在先,剪切在后。所测糜棱岩中石英脉的ESR年龄分别为372.9±30.0 Ma、275.0±20.0 Ma和218.0±20.0 Ma,真实地记录了晚加里东至中-晚海西期北秦岭的构造活动及所受影响。其中372.9±30.0 Ma是宽坪岩块向华北板块下的斜向俯冲汇聚和走滑的年代, 275.0±20.0 Ma是瓦乔断裂带的形成年龄。218.0±20.0 Ma的年龄则反映了华南、华北两大板块印支晚期全面闭合作用在秦岭造山带内部的影响。从以上3个年龄可以看出:北秦岭各构造带自北向南演化,时代上自北向南变新。     

Fluid inclusion studies of the Abawso gold prospect,near the Ashanti Belt,Ghana

The major Ghanaian lode gold deposits are preferentially aligned along the western and eastern contacts of the Kumasi Basin with the Ashanti and Sefwi Belts, respectively. The investigated area of the Abawso small-scale concession, covering the workings of the old Ettadom mine, is situated 3 km west of the lithological contact of the Birimian metavolcanic rocks of the Akropong Belt in the east with the Birimian metasedimentary rocks of the Kumasi Basin in the west. The rocks of the Abawso concession represent a steeply NW-dipping limb of a SE-verging anticline with an axis plunging to the SW. Quartz veining occurs predominantly in the form of en échelon dilatational veins along NNE–SSW-striking shear zones of a few metres width and shows evidence of brittle and ductile deformation. Also stockwork-style quartz veining occurs in the vicinity of the main shaft of the old Ettadom mine. Hydrothermal alteration includes sericitisation, sulphidation and locally carbonatisation. The auriferous quartz veins mainly follow the trend of brittle to ductile deformed quartz veins; however, some occur in stockwork. Fluid inclusion studies reveal a large number of H₂O inclusions along intragranular trails in auriferous quartz vein samples, as well as an overall dominance of H₂O and H₂O-CO₂ inclusions over CO₂ inclusions. Textural observations and physico-chemical fluid inclusion properties indicate post-entrapment modifications for all quartz vein samples due to grain boundary migration recrystallisation. This process is interpreted to be responsible for the generation of the CO₂ inclusions from a H₂O-CO₂ parent fluid. In comparison with mineralisation at the Ashanti and Prestea deposits, which are characterised by CO₂±N₂ inclusions, the observed inclusion assemblage may be due to a shallower crustal level of mineralisation, or different degrees and styles of recrystallisation, or a less pronounced development of laminated quartz veins due to comparably restricted pressure fluctuations. Furthermore, the microthermometric observations allow the reconstruction of a possible retrograde P-T path, depicting near-isothermal decompression in the P-T range of the brittle/ductile transition.Editorial handling: E. Frimmel     

Magmatic‐Hydrothermal Mineralization Sequence in Xinlu Ore Field,Guangxi, South China: Constraints from Zircon U‐Pb,Molybdenite Re‐Os,and Muscovite Ar‐Ar Dating

The Xinlu Sn‐polymetallic ore field is located in the western Nanling Polymetallic Belt in northeastern Guangxi, South China, where a number of typical skarn‐, hydrothermal vein‐type tin deposits have developed. There are two types of Sn deposits: skarn‐type and sulfide‐quartz vein‐type. The tin mineralizations mainly occur on the south side of the Guposhan granitic complex pluton and within its outer contact zone. To constrain the Sn mineralization age and further understand its genetic links to the Guposhan granitic complex, a series of geochronological works has been conducted at the Liuheao deposit of the ore field using high‐precision zircon SHRIMP U‐Pb, molybdenite Re‐Os, and muscovite Ar‐Ar dating methods. The results show that the biotite‐monzogranite, which is part of the Xinlu intrusive unit of the Guposhan complex pluton, has a SHRIMP U‐Pb zircon age of 161.0 ± 1.5 Ma. The skarn‐type ore has a ⁴⁰Ar‐³⁹Ar muscovite plateau age of 160 ± 2 Ma (same as its isochron age), and the sulfide‐quartz vein‐type ore yields an Re‐Os molybdenite isochron age of 154.4 ± 3.5 Ma. The magmatic‐hydrothermal geochronological sequence demonstrated that the hydrothermal mineralization took place immediately following the emplacement of the monzogranite, with the skarn metasomatic mineralization stage predating the sulfide mineralization stage. Geochronologically, we have compared this ore field with 26 typical Sn deposits distributed along the Nanling Polymetallic Belt, leading to the suggestion of the magmatic‐metallogenic processes in the Xinlu ore field (ca. 161–154 Ma) as a component of the Early Yanshanian large‐scale Sn‐polymetallic mineralization event (peaked at 160–150 Ma) in the Nanling Range of South China. Petrogenesis of Sn‐producing granite and Sn‐polymetallic mineralization were probably caused by crust–mantle interaction as a result of significant lithospheric extension and thinning in South China in the Late Jurassic.     

Preparation and Measurement of Cassiterite for Sn Isotope Analysis

Increased interest in the fractionation of Sn isotopes has led to the development of several techniques for preparing cassiterite (SnO₂, the primary ore of Sn) for isotopic analysis. Two distinct methods have been applied in recent isotopic studies of cassiterite: (a) reduction to tin metal with potassium cyanide (KCN) at high temperature (800 °C), with subsequent dissolution in HCl, and (b) reduction to a Sn solution with hydriodic acid (HI) at low temperature (100 °C). This study compares the effectiveness and accuracy of these two methods and contributes additional methodological details. The KCN method consistently yielded more Sn (> 70% in comparison with < 5%), does not appear to fractionate Sn isotopes at high temperatures over a 2‐hour period and produced consistent Sn isotope values at flux mass ratios of ≥ 4:1 (flux to mineral) with a minimum reduction time of 40 min. By means of a distillation experiment, it was demonstrated that HI could volatilise Sn, explaining the consistently low yields by this method. Furthermore, the distillation generated Sn vapour, which is up to 0.38‰ per mass unit different from the starting material, the largest induced Sn fractionation reported to date. Accordingly, the HI method is not recommended for cassiterite preparation for Sn isotopic analysis.     

Albite vein formation during exhumation of high-pressure terranes: a case study from alpine Corsica

The formation of late‐stage veins can yield valuable information about the movement and composition of fluids during uplift and exhumation of high‐pressure terranes. Albite veins are especially suited to this purpose because they are ubiquitously associated with the greenschist facies overprint in high‐pressure rocks. Albite veins in retrogressed metabasic rocks from high‐pressure ophiolitic units of Alpine Corsica (France) are nearly monomineralic, and have distinct alteration haloes composed of actinolite + epidote + chlorite + albite. Estimated P–T conditions of albite vein formation are 478 ± 31 °C and 0.37 ± 0.14 GPa. The P–T estimates and petrographic constraints indicate that the albite veins formed after the regional greenschist facies retrogression, in response to continued decompression and exhumation of the terrane. Stable isotope geochemistry of the albite veins, their associated alteration haloes and unaltered hostrocks indicates that the vein‐forming fluid was derived from the ophiolite units and probably from the metabasalts within each ophiolite slice. That the vein‐forming fluid was locally derived means that a viable source of fluid to form the veins was retained in the rocks during high‐pressure metamorphism, indicating that the rocks did not completely dehydrate. This conclusion is supported by the observation of abundant lawsonite at the highest metamorphic grades. Fluids were liberated during retrogression via decompression dehydration reactions such as those that break down hydrous high‐pressure minerals like lawsonite. Albite precipitation into veins is sensitive to the solubility and speciation of Al, which is more pressure sensitive than other factors which might influence albite vein formation such as silica saturation or Na:K fluid ratios. Hydraulic fracturing in response to fluid generation during decompression was probably the main mechanism of vein formation. The associated pressure decrease with fracturing and fluid decompression may also have been sufficient to change the solubility of Al and drive albite precipitation in fracture systems.     

广东省藤铁铁矿成矿地质特征

藤铁铁矿位于鱼鹿岩枝东接触带中段,该矿体为铁、铜、锡共(伴)生矿床.受断裂带、岩体侵入接触带、夕卡岩带和鱼鹿岩枝控制.据此总结出该区"三带一体"的成矿特征.     

内蒙古白乃庙金矿含金石英脉LA-ICP-MS锆石U-Pb测年及其地质意义

为了厘定内蒙古白乃庙金矿床的成矿时代,对矿区主要含金石英脉中热液蚀变锆石进行了LA-ICP-MS U-Pb测年。结果表明,锆石热液蚀变特征明显,具有清晰的核—幔—边结构,锆石核、幔均为岩浆锆石或变质锆石,热液蚀变增生边呈自形—半自形结构,Th/U值集中于0.2~0.5之间,测年数据为421.4~447.6Ma,认为金矿形成时代为志留纪。从区域成矿规律分析,初步认为白乃庙金矿床的形成与早古生代古亚洲板块向华北地块强烈俯冲引起的构造—岩浆活动密切相关。