煤层气测井探测技术的应用

煤田中在煤层附近有煤层气砂岩储层、泥质砂岩储层的存在,声波、密度两种孔隙度测井是进行孔隙度探测的有效方法。但是,当煤层气砂岩储层、泥质砂岩储层含气饱和度较小时,其分辨能力较低,这时就可以利用三测向电阻率,通过阿尔奇公式来计算孔隙饱和度;或是统计计算区内煤层气储层下限值的方法,还可采用孔隙度挖补法,提高识别能力。     

福建地壳各岩类铜元素丰度及铜的矿源层（岩）讨论

根据福建省最新岩石测量成果得出的各岩类铜元素丰度,讨论和初步确定了福建铜的矿源层（岩）。提出可按照丰度值高低,铜的初始赋存状态与被解离的难易,有无矿床（点）及具找矿意义的异常产出这３项因素,进一步将矿源层（岩）划分为较可靠的、可能的和潜在的３个级别。     

毛乌素沙地布寨淖尔下风向沙化湖滨地表沉积物理化特性

布寨淖尔湖是鄂尔多斯高原毛乌素沙地腹地的代表性盐湖,其东南部分布着平坦裸露的沙化湖滨\,湖岸沙丘及半固定沙丘,地表均沉积有大量沙物质与粉尘,这些松散富盐物质在风力侵蚀作用下常形成盐碱尘暴,威胁下风向区域的生态环境安全。研究了布寨淖尔湖东南部区域2.5 km范围内地表沉积物的土壤粒度与理化特性,旨在为盐碱尘暴源区的防治与生态治理提供基础科学参考。结果表明:布寨淖尔湖滨裸露地表沉积物以粗砂、中沙和细砂为主;从湖心沿东南方向等距离(0.5 km)采样,距湖心越远,粗砂和细砂含量逐渐减小,极细砂、粉砂和黏土含量逐渐增加,中砂含量无明显变化。地表沉积物含水率、容重随与湖心距离的增加逐渐增加,pH值、全盐量及电导率则呈逐渐减小趋势;沉积物阳离子以Na⁺为主,阴离子以Cl^-为主,其次为SO₄^2-、HCO^-₃。整体看,区内地表碱化较为严重,区域下风向土壤理化特征呈明显有规律变化趋势,湖滨地表土壤有明显风蚀迹象,可能是盐碱尘暴与湖岸沙丘形成的重要物源区。     

Estimation of the wave-related ripple characteristics and induced bed shear stress

A large data set on ripples was collected and examined. A set of new formulas for the prediction of the ripple characteristics is proposed with an emphasis on the disappearance of the ripples. The ripple wavelength was observed to be proportional to the bottom wave excursion but also to be a function of the grain-related Shields parameter and wave period parameter introduced by Mogridge et al. (1994). The ripple steepness was found to be nearly constant for orbital ripples, and with a sharp decrease for suborbital ripples. Two empirical functions are added including the effects of the critical Shields parameters (inception of transport and inception of sheet flow), i.e. giving the boundaries for the ripple existence's domain. The proposed formulas yield better prediction capabilities compared to the previously published formulas, especially when ripples are washed out. The effect of the ripple characteristics on the roughness height and the calculation of the bed shear stress is also discussed. It appeared that the bed shear stress calculation is more sensitive to the empirical coefficient a_r introduced in the estimation of the ripple-induced roughness height or to the limits of existence of the ripples than the ripple characteristics themselves.     

Numerical modeling of nonlinear water waves over heterogeneous porous beds

The transformation of nonlinear water waves over porous beds is studied by applying a numerical model based on Chen's [2006. Fully nonlinear Boussinesq-type equations for waves and currents over porous beds. Journal of Engineering Mechanics, 132:2, 220–230] Boussinesq-type equations for highly nonlinear waves on permeable beds. The numerical model uses a high-order time-marching solution and fourth-order finite-difference schemes for discretization of first-order spatial derivatives to obtain a computational accuracy consistent with the model equations. By forcing the wave celerity and spatial porous-damping rate of the linearized model to match the exact linear theory for horizontal porous bed over a prescribed range of relative depths, the values of the model parameters are optimally determined. Numerical simulations of the damped wave propagation over finite-thickness porous layer demonstrate the accuracy of both the numerical model and governing equations, which have been shown by prior theoretical analyses to be accurate for both nominal and thick porous layers. These simulations also elucidate on the significance of the higher-order porous-damping terms and the influence of the hydraulic parameters. Application of the model to the simulation of the wave field around a laboratory-scale submerged porous mound provides a measure of its capability, as well as useful insight into the scaling of the porous-resistance coefficients. For application to heterogeneous porous beds, the assumption of weak spatial variation of the porous resistance is examined using truncated forms of the governing equations. The results indicate that the complete set of Boussinesq-type equations is applicable to porous beds of nonhomogeneous makeup.     

Hydrodynamic Tidal Model of the Persian Gulf Based on Spatially Variable Bed Friction Coefficient

The aim of this study is to develop a two-dimensional hydrodynamic tidal model for the Persian Gulf (PG2017) using 2D-MIKE21 software. The advantages of present study is accounting for the spatial variation of bed friction coefficient besides a precise bathymetry together with a 23-year of combined records of satellite altimetry data. We found that the bed friction coefficient has a significant effect on sea level changes in the region under our modeling consideration. Since the tidal behavior in the northern part of the Qeshm Island is significantly different from the other parts of the Persian Gulf, to present a more accurate hydrodynamic tidal model, the Gulf is divided into two regions where the bed friction coefficient is modeled separately for each region. The root mean square value of the differences between the amplitude of dominant constituents; M2, S2, K1, and O1 derived from the PG2017 model and that of 98 altimetry and coastal tide gauge stations are respectively equal to 1.6, 1.9, 2.8, and 1.3?cm. Moreover, comparing the PG2017 model efficiency with the FES2014, OSU12, EOT11a, DTU10, and Admiralty models shows that the PG2017 model has an improvement of 22.1%, 47.2%, 43.2%, 44.2%, and 57.6% in terms of relative error, respectively.     

Methane exchange between coal-bearing basins and the atmosphere: the Ruhr Basin and the Lower Rhine Embayment, Germany

A precise knowledge of methane exchange processes is required to fully understand the recent rise of atmospheric methane concentration. Three of these processes take place at the lithosphere/atmosphere boundary: bacterial consumption of methane and emission of bacterial or thermogenic methane. This study was initiated to quantify these processes on a regional scale in the Ruhr Basin and the Lower Rhine Embayment. Since these areas are subject to bituminous coal and lignite mining, natural and anthropogenically-induced methane exchange processes could be studied. The methane emission and consumption rates and their carbon isotope signal were measured at the lithosphere/atmosphere boundary using flux chambers. On most of the soils studied, methane consumption by bacteria was identified. Thermogenic methane was released only at some of the natural faults examined. In active and abandoned bituminous coal mining areas methane emissions were restricted to small areas, where high emission rates were measured. The carbon isotope composition of methane at natural faults and in mining subsidence troughs was typical of thermogenic methane (−45 to −32 ‰ δ¹³C). Methane exchange balancing revealed that natural methane emissions from these two basins represent no source of atmospheric importance. However, methane release by upcast mining shafts dominates the methane exchange processes and is by about two orders of magnitude greater than methane consumption by bacterial oxidation in the soils.     

钻井成井工艺对出水量的影响分析及技术措施

通过2口基岩深井施工实例,分析、探讨了钻井成井工艺对出水量的影响以及应采取的针对性技术措施,可为同类水井的钻进成井施工提供一些有益的借鉴。     

在实际工程中怎样选择持力层厚度

就《规范》公式确定地基承载力时没限定持力层厚度这一不足提出了自己的看法，描述了各种地层组合关系时，总力与地基承载力之间的关系。     

Statistical analysis of sand grain/bed collision process recorded by high-speed digital camera

A high‐speed digital camera was employed to record the sand grain/bed collision process. With image processing and a statistical method, a series of parameters of the collision process were obtained. The results show that the collision process of a grain with rebounding can be represented by two parameters: the kinetic energy restitution coefficient and the collision angle. Both parameters satisfy a normal distribution, and they are dependent on one another. With an increase of the collision angle, the distribution of the kinetic energy restitution gradually reduces from a broad to a narrow range with low values. The percentage of vertical velocity restitution coefficients greater than 1 can reach 70% or more, which ensures that the settling time of the sand grains in the air increases and that they receive more energy from the air to progress the saltation movement.