Coupled changes in sand grain size and sand transport driven by changes in the upstream supply of sand in the Colorado River: Relative importance of changes in bed-sand grain size and bed-sand area

Sand transport in the Colorado River in Marble and Grand canyons was naturally limited by the upstream supply of sand. Prior to the 1963 closure of Glen Canyon Dam, the river exhibited the following four effects of sand supply limitation: (1) hysteresis in sediment concentration, (2) hysteresis in sediment grain size coupled to the hysteresis in sediment concentration, (3) production of inversely graded flood deposits, and (4) development or modification of a lag between the time of a flood peak and the time of either maximum or minimum (depending on reach geometry) bed elevation. Construction and operation of the dam has enhanced the degree to which the first two of these four effects are evident, and has not affected the degree to which the last two effects of sand supply limitation are evident in the Colorado River in Marble and Grand canyons. The first three of the effects involve coupled changes in suspended-sand concentration and grain size that are controlled by changes in the upstream supply of sand. During tributary floods, sand on the bed of the Colorado River fines; this causes the suspended sand to fine and the suspended-sand concentration to increase, even when the discharge of water remains constant. Subsequently, the bed is winnowed of finer sand, the suspended sand coarsens, and the suspended-sand concentration decreases independently of discharge. Also associated with these changes in sand supply are changes in the fraction of the bed that is covered by sand. Thus, suspended-sand concentration in the Colorado River is likely regulated by both changes in the bed-sand grain size and changes in the bed-sand area. A physically based flow and suspended-sediment transport model is developed, tested, and applied to data from the Colorado River to evaluate the relative importance of changes in the bed-sand grain size and changes in the bed-sand area in regulating suspended-sand concentration. Although the model was developed using approximations for steady, uniform flow, and other simplifications that are not met in the Colorado River, the results nevertheless support the idea that changes in bed-sand grain size are much more important than changes in bed-sand area in regulating the concentration of suspended sand.     

The strength and fractal dimension characteristics of alum–kaolin flocs

Flocs generated by various shear forces exhibit different characteristics of size, strength and structure. These properties were investigated by employing a continuous optical monitoring and a microscope with CCD camera to directly monitor aggregation under six different shear intensities. The floc structure was characterized by the fractal dimension. The results showed that the flocculation index (FI) decreased from 1.16 at 20 rpm to 0.25 at 250 rpm and the floc size decreased from 550 μm to 150 μm, meantime, the FI value showed a good correlation with floc size. In order to determine the floc strength, two methods were used. One was the strength factor, ranging from 18.3% to 62.5%, calculated from FI curve, and the other was a theoretical value between 0.005 N/m² and 0.240 N/m², estimated by calculation. The floc strength increased with the G value in both cases. Furthermore, the fractal dimension increased with G and its value was between 1.30 and 1.63. The relation between fractal dimension and strength was also obtained.     

New method for in situ characterization of loose material for landslide mapping purpose

The assessment of grain size distribution and plasticity of loose geological material, during in situ geological investigations, is not obvious. Visual appreciation allows an approximative quantification of the coarse granulometric fractions, but not of the fine ones. Field soils determination methods suggested until now, are visual and tactile tests leading to a very rough estimate, which is only qualitative and not very reproducible. The new proposed field test (GEOLEP method) allows a quick quantification of the fine fraction of loose material. It allows the determination of the sand fraction (fine and medium grained sands) as well as the methylene blue value of the samples. The necessary equipment to perform this test is light and compact and the time needed to analyze one sample is approximately 15 min. Thus it is also possible to carry out numerous measurements in one day. The calibrations were carried out on a selection of 13 natural samples, chosen for their representativeness of the typical alpine quaternary deposits. The results obtained with GEOLEP method are relevant compared with standardized laboratory tests; the obtained correlation indexes are of 73% for the comparison with laboratory stain test results and of 89% with a laboratory method using a similar procedure than the field test. The correlation we performed with Atterberg's limits tests shows that a rough approximation of plasticity index can also be obtained (R² = 75%). This method thus brings a new tool which should allow taking into account the lithological factor (by some quantitative and representative variables) in a reliable way for the evaluation of landslide hazards.     

Utilisation of the image analysis method for the detection of the morphological anisotropy of calcite grains in marble

This paper presents the development and utilisation of an automated image processing algorithm for detection and analysis of grains. Using optical polarising microscopy, a set of colored images are collected from an area on a thin section. A filtering operation, using rotation of a morphological alternating sequence filter (based on a structuring element), is used to remove twinning features within individual grains. Filtering is followed by the watershed segmentation technique to determine grain boundaries. The method is used for the identification of calcite grains in marble and the subsequent analysis of morphological anisotropy.     

Influence of surface roughness of dune bedforms on flow and turbulence characteristics

The current paper investigates the flow and turbulence characteristics over dune bedforms by means of laboratory experiments, where spatially dense and temporally high frequency velocity measurements were done. Although similar studies are available in the literature, the focus and novelty of the current study is to assess the influence of surface roughness of the dune bedforms on the nearbed flow. For direct comparison, two different surface roughness heights over idealized, fixed-shaped, high-angled dune bedforms were tested; one with a hydraulically-smooth surface, and the other with a fully-rough surface. Spatial variation of time-averaged flow as well as turbulence statistics were examined, which was complemented by streamline plots and spectral analyses. The results are interpreted from sediment entrainment and sediment transport points of view. The results show that increased dune surface roughness reduces the nearbed flow velocity, but increases the flow velocities at upper regions. The upward directed flow near the dune crests becomes stronger in the case of smooth surface, while the re-attachment point moves further downstream compared to the rough wall case. It is concluded that the roughness of the dune surface affects the nearbed flow and turbulence characteristics qualitatively and quantitatively, which is shown to have direct consequences on sediment entrainment characteristics.     

The evolution of fluviatile sediments as demonstrated by QDa-Md analysis

The modification of scree sediments entering a stream is examined by QDa-Md methods. Loss of fine or coarse subpopulations or both in combination from an initially symmetrical grain size distribution is shown to result in the dispersion of the QDa-Md plots throughout an envelope typical of fluvial sediments. Natural plots from the Rivers Earn and Tay provide live examples of the transenvironmental trend patterns demonstrated.     

印度尼西亚西爪哇低品位金矿柱浸试验

在较佳人浸粒度（-20ram）及适宜的喷淋制度条件下,经5天浸出周期柱浸后,可获得金浸出率91．31％、NaCN耗量142．3g／t的技术经济指标,表明该金矿适合用本堆浸工艺提金。     

Changes in Land Use and Agricultural Production Structure Before and After the Implementation of Grain for Green Program in Western China–Taking Two Typical Counties as Examples

Soil erosion becomes a serious environmental problem in the world, especially in western China. An effective management practice called the Grain for Green Program （GGP）, which was launched in 1999, aims to reduce soil and water loss and alleviate the ecological environment problem in western China. Two typical counties in western China, the Zhongxian （in Chongqing Municipality） and Ansai （in Shaanxi Province） were chosen to evaluate the dynamic changes of land use and agricultural production structure before and after the implementation of the Program in this paper. The results showed that the cultivated land area was reduced by 7.08% from 1989 to 2003. The cultivated land per person was decreased by 8.42% during 1999-2003. Moreover, the stability index of the secondary sector of the economy was increased from 0.91 in the period 1990-1999 to 0.94 in the following ten years. In addition, the stability index of tertiary economic sector increased from 0.88 to 0.92 in Zhongxian county. Meanwhile, the cultivated land area was reduced by 15.48% from 1990 to 1999. The soil erosion modulus was decreased by 33.33% from 1999 to 2006. Also, the stability index of secondary and tertiary economic sectors was 0.86 in the period 1998-2002. However, it decreased by 77% during 2002 to 2007 in Ansai County. These results imply that the Grain for Green Program had different impact on the two regions. Several effective strategies of soil and water conservation have been carried out to ameliorate the sustainable development of ecological environment and economy in these two counties of western China.     

Damming of large river by debris flow: Dynamic process and particle composition

The frequency and extent of debris flows have increased tremendously due to the extreme weather and the Wenchuan earthquake on May 12, 2008. Previous studies focused on the debris flow from gullies damming the mountain streams. In this paper, an equation for the run-out distance of debris flow in the main river is proposed based on the dynamic equation of debris flow at different slopes given by Takahashi. By undertaking field investigations and flume experiments, a new calculation method of the volume of debris flow damming large river is obtained. Using the percolation theory and the renormalization group theory it was deduced that the large particles should comprise more than 50% for forming a stable debris flow dam. Hence, the criteria of damming large river by debris flow is presented in terms of run-out distance and grain composition which was then validated through the event of damming river by debris flow at Gaojia gully, the upper reaches of the Minjiang River, Sichuan, China, on July 3, 2011.     

莱州湾东岸三山岛段砂质海岸沉积物运移动力机制

通过对三山岛岸段冬夏重复的地形测量和表层沉积物的粒度分析,研究了其地貌特征与地形变化规律、沉积物类型、粒度特征、运移趋势,并探讨了沉积物运移的动力机制。结果表明:该岸段可根据1985黄海高程-1.2m(低潮水位)和-6.5m(闭合深度)平面划分为海滩、水下岸坡和浅海陆架三个地貌单元,各地貌单元表层沉积物分布规律与地形变化特征区别显著。其中水下岸坡和浅海陆架地貌单元主要受潮流作用,海滩地貌单元主要受波浪作用。在西向落潮流和西南向潮余流的作用下,水下岸坡地貌单元发育一个中等规模潮流通道-沙脊沉积系统。表层沉积物以向西运移的趋势为主,少数滞留于西部潮流沙脊处,与地形"东侵西淤"的变化规律相符,这些西向运移的沉积物最终离开研究区,补给莱州浅滩。