TEM study of a special grain boundary in a synthetic K-feldspar bicrystal: Manebach Twin

 A monoclinic KAlSi₃O₈ feldspar Manebach twin boundary was synthesized by diffusion bonding and examined using high-resolution transmission electron microscopy. The sharp (001) twin boundary is straight and free of strain. The boundary width is smaller than d₀₀₁. There is no rigid body shift observed at the twin boundary, and the feldspar structure is arranged symmetrically across (001). The twin boundary structure consists of bridged tetrahedral crankshafts, which are characteristic of the feldspar lattice. The grain boundary structure is in good agreement with the geometrical model of Taylor et al. (1934). The grain boundary composition of K_1/2H_1/2AlSi₃O₈ differs from their model. Received: 13 February 2002 / Accepted: 24 December 2002 Acknowledgements We thank M. Rühle, S. Hutt, J. Mayer, A. Strecker and U. Salzberger at MPI, Stuttgart, for their support and valuable advice in preparing TEM sections of bicrystals.     

用几何光学模型对方向变化和直方图建模(英文)

森林和林地的图象二向性反射函数是一个统计函数，较之小尺度的树冠，它更多地用于大尺度的均匀覆盖的地块。用航空象片和高空间分辨率扫描仪数据作的图象热点影响研究在小尺度下显示出很大方差，而且，太阳和观测角度的交互变化进一步增加了这种反射各向异性变化的方差并有规律地继续呈现在分辨率低的图象中，这被称作ＢＲＶＦ或二向性反射方差函数。近年来，作为一种解释结构的手段，高分辨率图象的方向性方差和直方图结构越来越受到重视，这方面的数据也越来越多。这项工作是利用图象方差来解释结构问题（Ｓｔｒａｈｌｅｒ和李小文倡导）的一种延伸，并在过去１５年中由众多人员作了大量工作。在树冠尺度下，森林的直方图和二向反射方差函数可以计算出来，这里利用了近似迭代函数来处理这些数据并和数值积分模拟进行了对比，结果显示可对二向性反射方差函数的测量和引入直方图的各向异性进行准确建模。     

机载模拟POLDER多角度图象配准(英文)

多角度成象对于获取多角度遥感数据是非常重要的。在对多角度数据进行分析之前，首先要对多角度图象进行配准。经过配准，可以识别出相同的地面目标。在配准过程中，一个主要的困难是由于观察角度的不同、双向反射变化及大气的影响造成的图象灰度变化。如何解决灰度变化的影响关系到图象的配准精度。我们在该文中介绍一种多角度图象配准过程，包括预处理、基于层次结构的图象灰度相关配准。为了去掉大角度造成的灰度变化，我们用改进的模板匹配进行配准。这种方法的优点是与配准模板灰度均值无关，只与灰度变化程度有关。配准过程中也同时考虑到纹理的变化。整个配准过程是沿着观测角度增大的方向进行的序列图象配准，以提高大角度图象配准精度。最后，图象的纠正采用局部自适应几何纠正以获得较满意的结果。我们用法国ＣＮＥＳ提供的ＰＯＬＤＥＲ飞机模拟多角度图象进行配准，并提取了小麦和水稻等植被的多角度信息。     

Texture and mineralogy of sediments from the Ganges-Brahmaputra-Meghna river system in the Bengal Basin, Bangladesh and their environmental implications

 The Bengal basin, Bangladesh, represents one of the most densely populated recent floodplains of the world. The sediment flux through the basin is one of the highest on a global scale. A significant portion of this sediment load find its sink in the basin itself because of its lower elevation and frequent flooding. The textural, mineralogical and chemical nature of the sediments thus have an important bearing on the environmental quality of the basin as well as for the Bay of Bengal. The sediment load of the Ganges-Brahmaputra-Meghna (GBM) river system consists exclusively of fine sand, silt and clay at their lower reaches within the Bengal basin, Bangladesh, and is deposited under uniformly fluctuating, unidirectional energy conditions. The sediments have a close simitarity in grain size with the sediments of the surrounding floodplain. The mineral assemblage is dominated by quartz and feldspars. Illite and kaolinite are the major clay minerals, and occur in almost equal proportion in bed sediments. The heavy mineral assemblage is dominated by unstable minerals which are mostly derived from high-rank metamorphic rocks. The characteristic smaller grain-size, i.e. having large surface-to-mass ratios, and the mineralogy of sediments suggests that they are susceptible to large chemical adsorptive reactions and thus could serve as a potential trap for contaminants. However, the sediments of the GBM river system in the Bengal basin, Bangladesh, shows lower concentration of Pb, Hg and As, and a marginally higher value for Cd as compared to that of standard shale. Considering population density and extensive agricultural practice in the basin, the sediments can in the long run become contaminated. Received: 9 November 1994 · Accepted: 18 June 1996     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

风沙流中沙粒浓度分布的实验研究

利用粒子图像测速技术（PIV）,在风洞内对与天然沙接近的石英沙风沙流沙颗粒浓度沿高度分布进行了研究。对 3种不同轴线风速研究结果表明,风沙流中沙粒浓度沿水平方向基本不变,而随高度呈指数衰减,而且其衰减速率与风速密切相关。风速越大,衰减速率越慢;风速越小,衰减速率越快。风沙运动一旦发生时,靠近沙床表面的沙粒浓度随风速变化很小,可以认为趋于稳定,达到最大值。     

18—23MSP 多光谱航空摄影技术

此项研究是国家科技攻关项目。在研究此课题以前,世界上采用的多光谱航空摄影机一直是小像幅的(大部分为6cmx6cm,代称为6MSP)。6MSP不能测图,分光“有害吸收”大,故图像质量差,且像幅小,飞行和后期加工量极大。本研究采用18cm×l8cm和23cm×23cm像幅航空摄影测量像机组成多光谱像机组,并设计了“截止滤光镜一特制感光胶片”组合的无“有害吸收”的分光系统,使本多光谱航空摄影像幅比6MSP加大了9倍和14.7倍,并能“一摄多用”,既能测图,又能进行资源调查和环境监测,其图像因无“有害吸收”,分光质量高,可供目视判读,也可输入计算机进行准确地物分类解译。18-23MSP是一项有效的航空遥感技术。     

易门铜矿"镜面对称"成矿及意义

本文在列举了大量地质依据的基础上,论证了易门铜矿区西矿带的矿床（点）分布存在“镜面对称”成矿现象,并讨论了形成这种对称分布的力学机理。这一发现无疑对矿床形成和分布具有重要的理论意义。而且,对本区和类似地区进行成矿预测及矿产勘查具有重要的实际指导意义。     

国家西部测图工程产品模式设计与实践——以1:50000影像地形图为例

为实现国家西部1∶50 000地形图空白区测图工程:丰富产品种类,拓展服务领域的设计宗旨,根据ISO 9000对产品的概念,提出了西部测图工程整体产品模式,并对其进行细化,建立了国家两部测图工程地形图产品模式.本文以西部测图工程1∶50 000影像地形图的设计与实现为实例,详细介绍了1∶50 000影像地形图测绘新产品...     

退耕还林对牡丹江区域生态环境脆弱性的影响研究

从脆弱生态系统的特征入手,选取景观分离度、分维数倒数、破碎度3个反映景观稳定性及抗干扰能力的景观格局指数,并结合土壤侵蚀强度构成区域生态环境脆弱性的敏感因子,针对研究区地形,以景观生态适宜度作为生态系统自我恢复能力的表征,构建了牡丹江区域生态环境脆弱度评价模型。评价结果表明:（1）退耕还林前后景观类型脆弱度均表现为旱田>建设用地>水田>林地>未利用土地>水域>沼泽>草地;（2）研究区生态脆弱度表现为以脆弱度高值区为中心呈环状向四周递减的趋势,脆弱度高值区面积比重由退耕前的21.57%减小到退耕后的17.11%,脆弱度低值区面积比重由退耕前的63.14%增加到退耕后的67.66%;（3）生态脆弱度高值区域主要分布在200~400m的海拔高度,0~8°的坡度范围内,且退耕后面积比例呈下降趋势,而低值区域则分布在>300m海拔高度的各个坡度范围内,且退耕后面积比例呈上升态势。研究结果符合研究区实际状况。概言之,退耕还林缓和了研究区生态脆弱度状况,促进了生态环境质量向良好方向发展。