中国和哈萨克斯坦阿尔泰大地构造及地壳演化

中国和哈萨克斯坦阿尔泰位于西伯利亚板块西南边缘，阿尔泰褶皱系与斋桑－北准噶尔褶皱系的接合部位，分为霍尔宗－丘伊－哈纳斯、冲乎尔－青河、别洛乌巴－南阿尔泰、矿区阿尔泰和东卡尔巴－富蕴、二台6个构造建造带，14个构造建造亚带。区内地壳演化可分为太古宙－元古宙古陆壳形成阶段、早古生代被动陆缘壳壳增生阶段、晚古生代陆壳拉张破坏和挤压重建（增生）阶段及中－新生代相对稳定的大陆发展阶段。     

A Vendian-Cambrian Island Arc System of the Siberian Continent in Gorny Altai (Russia, Central Asia)

An extended Vendian-Cambrian island-arc system similar to the Izu-Bonin-Mariana type is described in the Gorny Altai terrane at the margin of the Siberian continent.

Three different tectonic stages in the terrane are recognized. (1) A set of ensimatic active margins including subducted oceanic crust of the Paleo-Asian ocean, the Uimen-Lebed primitive island arc, oceanic islands and seamounts: the set of rocks is assumed to be formed in the Vendian. (2) A more evolved island arc comprising calc-alkaline volcanics and granites: a fore-arc trough in Middle-late Cambrian time was filled with disrupted products of pre-Middle Cambrian accretionary wedges and island arcs. (3) Collision of the more evolved island arc with the Siberian continent: folding, metamorphism and intrusion of granites occurred in late Cambrian-early Ordovician time.

In the late Paleozoic, the above-mentioned Caledonian accretion-collision structure of the Siberian continent was broken by large-scale strike-slip faults into several segments. This resulted in the formation of a typical mosaic-block structure.     

GEOCHEMICAL EFFECTS OF MAJOR ELEMENTS DURING FLUID-ROCKS INTERACTION IN MARINWOBO FAULT IN THE SOUTH MARGIN AREAS OF ALTAI MOUNTAINS

There are four types of metamorphic rocks in the Marinwobo fault, i. e, cataclasite, mylonite,mictosite and migmatitic granite, and the formation of these rocks is due to the progressive metamorphism of the pyroclastics. The fluids play a very important role in the metamorphic process of these rocks in the Marinwobo fault, the most important feature is that the fluids not only result in the migration of the major elements of the deformation rocks, but also result in the volume loss of the deformation rocks in the deformation process. Thus the migration laws of the major elements in different stages of the progressive metamorphic process are discussed according to mass balance equations. Finally, the quantitative analysis of the mass loss and volume loss of the different rocks the in Marinwobo fault is discussed in this paper.     

Late Cenozoic transpression in southwestern Mongolia and the Gobi Altai-Tien Shan connection

The Gobi Altai region of southwestern Mongolia is a natural laboratory for studying processes of active, transpressional, intracontinental mountain building at different stages of development. The region is structurally dominated by several major E—W left-lateral strike-slip fault systems. The North Gobi Altai fault system is a seismically active, right-stepping, left-lateral, strike-slip fault system that can be traced along the surface for over 350 km. The eastern two-thirds of the fault system ruptured during a major earthquake (M = 8.3) in 1957, whereas degraded fault scarps cutting alluvial deposits along the western third of the system indicate that this segment did not rupture during the 1957 event but has been active during the Quaternary. The highest mountains in the Gobi Altai are restraining bend uplifts along the length of the fault system. Detailed transects across two of the restraining bends indicate that they have asymmetric flower structure cross-sectional geometries, with thrust faults rooting into oblique-slip and strike-slip master faults. Continued NE-directed convergence across the fault system, coupled with left-lateral strike-slip displacements, will lead to growth and coalescence of the restraining bends into a continuous sublinear range, possibly obscuring the original strike-slip fault system; this may be a common mountain building process.

The largely unknown Gobi-Tien Shan fault system is a major left-lateral strike-slip fault system (1200 km + long) that links the southern ranges of the Gobi Altai with the Barkol Tagh and Bogda Shan of the easternmost Tien Shan in China. Active scarps cutting alluvial deposits are visible on satellite imagery along much of its central section, indicating Quaternary activity. The total displacement is unknown, but small parallel splays have apparent offsets of 20 + km, suggesting that the main fault zone has experienced significantly more displacement. Field investigations conducted at two locations in southwestern Mongolia indicate that late Cenozoic transpressional uplift is still active along the fault system. The spatial relationship between topography and active faults in the Barkol Tagh and Bogda Shan strongly suggests that these ranges are large, coalescing, restraining bends that have accommodated the fault's left-lateral motion by thrusting, oblique-slip displacement and uplift. Thus, from a Mongolian perspective, the easternmost Tien Shan formed where it is because it lies at the western termination zone of the Gobi-Tien Shan fault system. The Gobi-Tien Shan fault system is one of the longest fault systems in central Asia and, together with the North Gobi Altai and other, smaller, subparallel fault systems, is accommodating the eastward translation of south Mongolia relative to the Hangay Dome and Siberia. These displacements are interpreted to be due to eastward viscous flow of uppermost mantle material in the topographically low, E–W trending corridor between the northern edge of the Tibetan Plateau and the Hangay Dome, presumably in response to the Indo-Eurasian collision 2500 km to the south.     

Geometry of the fault zone of the 2003 Ms = 7.5 Chuya earthquake and associated stress fields, Gorny Altai

The co-seismic deformations produced during the September 27, 2003 Chuya earthquake (Ms = 7.5) that affected the Gorny Altai, Russia, are described and discussed along a 30 km long segment. The co-seismic deformations have manifested themselves both in unconsolidated sediments as R- and R′-shears, extension fractures and contraction structures, and in bedrock as the reactivation of preexisting schistosity zones and individual fractures, as well as development of new ruptures and coarse crushing zones. It has been established that the pattern of earthquake ruptures represents a typical fault zone trending NW–SE with a width reaching 4–5 km and a dextral strike–slip kinematics. The initial stress field that produced the whole structural pattern of co-seismic deformations during the Chuya earthquake, is associated with a transcurrent regime with a NNW–SSE, almost N–S, trending of compressional stress axis (σ₁), and a ENE–WSW, almost E–W, trending of tensional stress axis (σ₃). The state of stress in the newly-formed fault zone is relatively uniform. The local stress variations are expressed in insignificant deviation of σ₁ from N–S to NW–SE or NE–SW, in short-term fluctuations of relative stress values in keeping their spatial orientations, or in a local increase of the plunge angle of the σ₁. The geometry of the fault zone associated with the Chuya earthquake has been compared with the mechanical model of fracturing in large continental fault zones with dextral strike–slip kinematics. It is apparent that the observed fracture pattern corresponds to the late disjunctive stage of faulting when the master fault is not fully developed but its segments are already clearly defined. It has been shown that fracturing in widely different rocks follows the common laws of the deformation of solid bodies, even close to the Earth surface, and with high rates of movements.     

Stratotypes of Quaternary deposits of the Yaloman-Katun’ zone (Gorny Altai)

We revised geological data substantiating the unified 1983 Regional Stratigraphic Chart of Gorny Altai Quaternary deposits. Based on our own and literature data, we showed that Lower and Middle Quaternary glacial horizons are erroneously distinguished in the Yaloman-Katun’ zone of southeastern Altai. A new correlation is proposed, according to which the glacial complex of the maximum glaciation (MIS-6) corresponds to the Inya catafluvial series and the glacial complex of the first postmaximum glaciation (MIS-4 unit), to the Sal’dzhar catafluvial series. The lectostratotypes of both series are described. The event history of the second half of the Late Neopleistocene in Gorny Altai (MIS-3 and MIS-2) was less catastrophic for ancient biota and Paleolithic man than it was believed earlier.     

不同时间尺度的阿尔泰山北部和南部降水对比研究

常年受到西风影响的阿尔泰山地区,是古气候研究的重点区域之一。利用阿尔泰山北部和南部的11个气象站观测数据和已发表的古气候数据（包括树轮、冰芯和湖芯）,详细对比了不同时间尺度上（季节、年、几十年、百年和千年尺度）阿尔泰山北部和南部的降水变化。结果表明,阿尔泰山北部器测时段降水是逐渐下降的,而阿尔泰山南部降水反而呈现逐渐增加的趋势。这种反相的降水关系也体现在过去200年、过去1000年和全新世时段,说明阿尔泰山北部和南部降水在季节、年、几十年、百年和千年尺度上均存在相反的趋势。不同时间尺度上降水存在的相反关系表明阿尔泰山是一个重要的气候边界。但不同时间尺度上出现相反变化的原因需进一步详细探讨,这不仅有助于了解区域水汽变化的历史,也有助于加深理解欧亚草原丝绸之路文化的演替。     

Transpressional deformation,strain partitioning and fold superimposition in the southern Chinese Altai,Central Asian Orogenic Belt

Transpressional deformation has played an important role in the late Paleozoic evolution of the western Central Asian Orogenic Belt (CAOB), and understanding the structural evolution of such transpressional zones is crucial for tectonic reconstructions. Here we focus on the transpressional Irtysh Shear Zone with an aim at understanding amalgamation processes between the Chinese Altai and the West/East Junggar. We mapped macroscopic fold structures in the southern Chinese Altai and analyzed their relationships with the development of the adjacent Irtysh Shear Zone. Structural observations from these macroscopic folds show evidence for four generations of folding and associated fabrics. The earlier fabric (S₁), is locally recognized in low strain areas, and is commonly isoclinally folded by F₂ folds that have an axial plane orientation parallel to the dominant fabric (S₂). S₂ is associated with a shallowly plunging stretching lineation (L₂), and defines ∼NW-SE tight-close upright macroscopic folds (F₃) with the doubly plunging geometry. F₃ folds are superimposed by ∼NNW-SSE gentle F₄ folds. The F₃ and F₄ folds are kinematically compatible with sinistral transpressional deformation along the Irtysh Shear Zone and may represent strain partitioning during deformation. The sub-parallelism of F₃ fold axis with the Irtysh Shear Zone may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation (F₃) in fold zones. The strain partitioning may have become less efficient in the later stage of transpressional deformation, so that a fraction of transcurrent components was partitioned into F₄ folds.     

Geochemistry,geochronology and Hf isotope of granitoids in the Chinese Altai: Implications for Paleozoic tectonic evolution of the Central Asian Orogenic Belt

The Chinese Altai in northwestern Xinjiang has numerous outcrops of granitoids which provide critical information on accretionary orogenic processes and crustal growth of the Central Asian Orogenic Belt.Zircon U-Pb ages, Hf-isotopic compositions and whole-rock geochemistry of monzogranite and granodiorites in the Qinghe County are employed to elucidate Paleozoic tectonics of the Chinese Altai. Granodiorites have crystallization ages of 424.6 ± 3.1 Ma(MSWD = 0.23) and 404.0 ± 3.4 Ma(MSWD = 0.18);monzogranite was emplaced in the early Permian with a crystallization age of 293.7 ± 4.6 Ma(MSWD = 1.06). Both granodiorites and monzogranite are I-type granites with A/CNK ratios of 0.92 -0.97 and 1.03 -1.06, respectively. They also show similar geochemical features of high HREE and Y contents, low Sr contents and Sr/Y ratios, as well as enrichment of Cs, Rb, Th and U, and depletion of Nb, Ta, P and Ti.These geochemical features indicate that the monzogranite and granodiorites were formed in an arc setting related to subduction. The gneissic monzogranites display high SiO_2 and K_2 O contents, and belong to the high-K calc-alkaline series. In the chondrite normalized REE distribution pattern, the monzogranite samples exhibit enrichment of LREE with strong negative Eu anomalies(σE u =0.44 -0.53), zircon εHf(t) values from +7.24 to +12.63 and two-stage Hf model ages of 463 -740 Ma. This suggests that the monzogranite was generated from the mixing of pelitic and mantle material. The granodiorite samples are calc-alkaline granites with lower contents of Si O_2 and Na_2 O + K_2 O, higher contents of TiO_2, Fe_2O_3~t, MgO and CaO compared to the monzogranite samples. They also show enrichment of LREE and moderate negative Eu anomalies(σE u= 0.54 =0.81), as well as slightly higher differentiation of LREE than that of HREE. The425 Ma granodiorite has zircon εHf(t) values from -0.51 to +1.98 and two-stage Hf model ages of 1133 -1240 Ma, whereas the 404 Ma granodiorite displays those of +2.52 to +7.50 and 816 -1071 Ma.Geochemistry and zircon Hf isotopic compositions indicate that granodiorites were formed by partial melting of juvenile lower crust. Together with regional geology and previous data, the geochemical and geochronological data of the monzogranite and granodiorites from this study suggest long-lived subduction and accretion along the Altai Orogen during ca. 425 -294 Ma.     

Features of magmatim-related metallogeny of Gorny Altai and Rudny Altai (Russia)

The Rudny Altai and Gorny Altai regions had different geologic histories and differ in metallogenic patterns. The Vendian-Early Cambrian to Permian-Triassic multistage evolution of Gorny Altai included subduction, accretion-collision, and rifting events accompanied by magmatism and related mineralization. Metallogeny evolved in discrete pulses, with especially abundant Late Paleozoic-earliest Mesozoic mineralization. The Devonian-Carboniferous pulse produced diverse mineral deposits (iron, mercury, gold, silver, molybdenum, tungsten, cobalt, polymetallic ores, and rare earths), some of considerable economic value. The territory of Gorny Altai includes several large ore districts that belong to different zones. They are the Beloretsk-Kholzun iron district in the west, the Kayancha-Sinyukha fluorine-gold district in the northeast, the Kurai gold-mercury and Yustyd rare-metal-silver districts in the southeast, and the Kalguty rare-metal-tungsten and Ulandryk U-REE-Cu districts in the south. The largest mineral deposits are Kholzun (Fe, P₂O₅), Karakul (Co, Bi), Sinyukha (Au), Aktash and Chagan-Uzun (Hg), Ozernoe and Pogranichnoe (Ag), Kalguty (Mo, W), Alakha (Li, Ta), Rudnyi Log (Y,Fe-specularite), and Urzarsai (W-scheelite). Mineralization in Rudny Altai is mainly pyritic: copper-pyrite, pyrite-polymelallic ore, and barite-polymelallic ore. It resides in suprasubduction basalts and rhyolites and in Emsian to Frasnian island-arc volcanics at different stratigraphic levels of Devonian volcanosedimentary sequences in six ore districts. The Kurchum high-grade metamorphic block hosts copper-pyrite and gold-quartz mineralization related to Hercynian volcanism.