胶东型金矿：与壳源重熔层状花岗岩和壳幔混合花岗闪长岩有关的金矿

胶东型金矿是与壳源重熔形成的层状岩浆活动和壳幔混合岩浆活动有关的金矿床,由于成矿时所处构造位置和容矿构造不同而表现为不同的类型,涵盖破碎带蚀变岩型、石英脉型等胶东地区所有金矿床类型。玲珑花岗岩是壳源物质长期处于高温高压下且熔融形成的多物质来源层状岩体,其析出的高温碱性热液溶解金等成矿物质形成初始含矿热液。岩体抬升过程中在其边部往往容易形成拆离带,在岩体中形成脆性断裂构造,均为成矿结构面。后期壳幔混合成因的郭家岭花岗闪长岩,侵入于玲珑层状花岗岩中并一起隆升,使郭家岭花岗闪长岩附近区域的成矿结构面进一步扩大,矿液浓度进一步增大,当上升到特定深度时形成金矿体。玲珑花岗岩和郭家岭花岗闪长岩共同构成成矿地质体,重熔的玲珑层状岩体是成矿基础地质体,郭家岭花岗闪长岩加强了金矿的成矿作用。该认识对开辟胶东新的找矿思路和找矿靶区有很好的指导作用,据此初步预测新的大型拆离带是金矿集中成矿区域,可能成为将来有望取得重大突破的矿集区。     

滇东南安那金矿床成矿流体地球化学研究

云南安那金矿床位于右江盆地南缘,产于二叠纪辉绿岩侵入体之中,广泛发育乳白色石英网脉,蚀变辉绿岩体即为金矿体。与右江盆地以沉积岩为容矿岩石的卡林型金矿床类似,具有硅化、粘土化、碳酸盐化和硫化物化等热液蚀变特征。本文对安那金矿床石英中的流体包裹体岩相学、显微测温学、激光拉曼光谱以及氢氧同位素组成进行了分析,发现成矿期石英中的流体包裹体主要为富含CO_2气-液两相或三相流体包裹体,其均一温度范围为208~312℃(平均254℃),盐度很低,变化范围为0~2%Na Cleqv,成矿溶液的密度为0.88~0.98g/cm~3,表明形成安那金矿床的成矿流体属于中温、低盐度、中-低密度的流体。激光拉曼光谱分析显示,石英中包裹体的气相成分富含CO_2、N_2以及微量CH_4等挥发分。成矿流体的氢氧同位素组成显示变质流体成因,结合矿石显微岩相学结构,认为流体溶蚀交代辉绿岩中的含Ti-Fe辉石或者钛铁矿,溶解Fe的硫化作用过程是含Au黄铁矿和毒砂沉淀富集的重要机制。成矿作用可能与右江盆地南缘印支期造山事件有关。     

山东省蓬莱市西南王金矿床地质特征与资源前景

西南王金矿床位于栖霞-蓬莱成矿带内,是蓬莱地区西部比较典型的缓倾斜薄层石英脉型金矿床。矿体受NNE—NE向断裂控制,倾向SE,倾角15°~25°,呈薄层脉状,分布于郭家岭序列罗家单元的斑状中粒含黑云二长花岗岩和谭格庄序列牟家单元的片麻状细粒奥长花岗岩中。该文通过对矿床地质特征与矿体空间赋存规律的研究,认为矿床深部及周边区域仍有较好的资源前景。     

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.     

新泰地区绿岩型金矿及其成因探讨

通过对新泰地区花岗绿岩带基本地质特征、金的初始丰度及其后生变化、花岗质岩石金含量的研究 ,探讨了火山喷发沉积作用、变质作用、岩浆作用及构造作用对金的活化与迁移的影响。结合对区域地质背景及演化史的分析 ,认为该区绿岩型金矿具糜棱岩型和石英脉型两种类型 ,属多源多期热液充填型成因     

综合物化探方法在山西东腰庄绿岩带型金矿外围找矿中的应用

山西东腰庄金矿是我国典型的绿岩带型金矿床之一,主要赋存于新太古代五台群鸿门岩组浅色变质绿片岩中,含矿带岩性主要为硅化绢云钠长片岩和绢云钠长片岩,层控特征明显。本次建立了东腰庄金矿床地质-地球物理-地球化学找矿模型,并运用岩石地球化学勘查、电法勘探,在东腰庄金矿外围勘查区圈定化探异常4处、激电异常2处,其中化探1号多元素综合异常与电法异常吻合较好,推测为矿致异常,通过激电测深,推测地质体形态为透镜体,埋深较浅。综合物化探方法利用绿岩带型金矿形成过程中元素迁移带来的原生地球化学异常,以及主要载金矿物-黄铁矿与围岩之间的电性差异,在此次找矿勘查过程中圈定了找矿靶区,取得了较好成效,为下步钻探验证工作提供了依据。     

金品位分形结构特征及其地质意义——以胶东乳山蓝家庄金矿床为例

胶东乳山蓝家庄金矿床为近年来胶东东部牟平-乳山金成矿带探明的一处大型金矿床。该文通过系统收集该矿床Ⅰ号矿体金品位数据,综合运用特征参数统计和分形理论,分析了金品位特征参数垂向变化规律及垂向分形结构特征。研究结果表明,金品位具有显著的多重分形结构特征,矿化较好地段一般具有3～4个分维值,而矿化较差地段一般仅具有1个分维值。金品位特征参数和分形结构的规律性变化指示蓝家庄金矿床Ⅰ号矿体向-500m标高以深仍有一定程度地延伸,预测深部具有良好的找矿前景。     

莫桑比克楠普拉省喀祖祖地区砂金成因及其对岩金指示意义

莫桑比克楠普拉省喀祖祖地区多条河流均有人工砂金开采活动.砂金分布在海拔300～450 m之间的石英砾石层,底部岩石主要为中元古代片麻状杂岩体.研究区为准平原-丘陵地貌,水动力条件受季节影响较大.砂金分布与河流不存在明显的耦合性,暗示了原生金矿化可能较分散.同时,研究区露头受第四纪覆盖严重,物化探效果不显著,砂金与重砂矿...     

Geometry and kinematics of brittle deformation in the Central Cameroon Shear Zone (Kékem area): Implication for gold exploration within the Central Africa Fold Belt in Cameroon

The Central Africa Fold Belt (CAFB) is a collision belt endowed with gold deposits in Eastern Cameroon area mined for about 50 years. However, favorable areas for gold exploration are poorly known. This paper presents (1) the kinematics of the brittle deformation in the Kékem area in the SW portion of the Central Cameroon Shear Zone and (2) constraints gold mineralization events with respect to the collisional evolution of the CAFB. The authors interpret that the conjugate ENE to E and NNW to NW trending lineament corresponds to the synthetic (R) and the antithetic (R’) shears, which accompanied the dextral slip along the NE to ENE striking shear. The latter coincides with the last 570–552 Ma D₃ dextral simple shear-dominated transpression, which is parallel to the Bétaré Oya shear zone hosting gold deposits. Gold mineralizations, which mainly occurred during the last dextral shearing, are disseminated within quartz veins associated to Riedel’s previous structures reactivated due to late collisional activities of the CAFB as brittle deformation. Gold mineralizations occurred mainly during the 570–552 Ma D₃ event. The reactivation, which might be due to dextral simple shear during mylonitzation, plausibly remobilized the early gold deposits hosted in syn-compressional rocks and/or possibly focused deep-sourced fluid mixed with those released by dehydration. Therefore, the Central Cameroon Shear Zone where Kékem is located, and which shows similar petrographical and structural features to those controling Batouri gold district, is a target area for gold exploration in Cameroon.     

山东省平邑归来庄金矿深部矿床特征及成矿规律研究

山东平邑归来庄金矿深部矿床,受近EW向归来庄F_1断裂和中生代隐爆角砾岩体共同控制,赋存于Ⅰ号构造蚀变带内,属"中低温热液隐爆角砾岩型"。通过对矿床地质特征、矿体特征、矿石质量、矿石类型、围岩蚀变、找矿标志及矿床成因等方面的研究,总结了该区基本成矿规律:归来庄F_1断裂为一经历多次活动的构造隐爆角砾岩蚀变带,既控矿又赋矿,矿体的展布、金的富集与隐爆角砾岩体关系密切;矿体总体向南西侧伏,具有侧伏向延伸大于倾向延长的特点,侧伏向深部仍可能再次出现富集带,具有良好的找矿前景和一定的资源潜力。