Comparison of two methods for seismic hazard assessment in a low-seismicity area

The EGO method, developed by Egozcue et al. and the SRAMSC method, originally developed by Cornell and later programmed by McGuire, to assess the seismic hazard, are compared for the low seismicity area Belgium, The Netherlands, and NW Germany. Using the same input data, the results of the EGO method without the majority criterion and the SRAMSC method with upper bound XII agree very well. The influence of the zoning is investigated for the EGO method. It is not necessary to define the zones for the EGO method so strictly as for the SRAMSC method, but too wide zones can give bad results.     

Seismic potential of Southern Italy

To improve estimates of the long-term average seismic potential of the slowly straining South Central Mediterranean plate boundary zone, we integrate constraints on tectonic style and deformation rates from geodetic and geologic data with the traditional constraints from seismicity catalogs. We express seismic potential (long-term average earthquake recurrence rates as a function of magnitude) in the form of truncated Gutenberg–Richter distributions for seven seismotectonic source zones. Seismic coupling seems to be large or even complete in most zones. An exception is the southern Tyrrhenian thrust zone, where most of the African–European convergence is accommodated. Here aseismic deformation is estimated to range from at least 25% along the western part to almost 100% aseismic slip around the Aeolian Islands. Even so, seismic potential of this zone has previously been significantly underestimated, due to the low levels of recorded past seismicity. By contrast, the series of 19 M6–7 earthquakes that hit Calabria in the 18th and 19th century released tectonic strain rates accumulated over time spans up to several times the catalog duration, and seismic potential is revised downward. The southern Tyrrhenian thrust zone and the extensional Calabrian faults, as well as the northeastern Sicilian transtensional zone between them (which includes the Messina Straits, where a destructive M7 event occurred in 1908), all have a similar seismic potential with minimum recurrence times of M ≥ 6.5 of 150–220 years. This potential is lower than that of the Southern Apennines (M ≥ 6.5 recurring every 60 to 140 years), but higher than that of southeastern Sicily (minimum M ≥ 6.5 recurrence times of 400 years). The high seismicity levels recorded in southeastern Sicily indicate some clustering and are most compatible with a tectonic scenario where the Ionian deforms internally, and motions at the Calabrian Trench are small. The estimated seismic potential for the Calabrian Trench and Central and Western Sicily are the lowest (minimum M ≥ 6.5 recurrence times of 550–800 years). Most zones are probably capable of generating earthquakes up to magnitudes 7–7.5, with the exception of Central and Western Sicily where maximum events sizes most likely do not exceed 7.     

Site Effects Study in the Serravalle Village (NE Italy) by Means of Spectral Ratios Analyses Relatively to Multiple Reference Sites

The area of Serravalle, sited in the northern part of the town of Vittorio Veneto (TV), NE Italy, has been the target of a seismic microzonation campaign. 10 seismic stations have been deployed for a 7 months period to record in continuous mode. Three stations were installed on bedrock outcrops and seven on sedimentary sites with variable cover thickness. Spectral analyses have been performed on the collected data-set using the Generalized Inversion Technique (GIT, e.g. Andrews, 1986). In particular, spectral ratios have been calculated for each station relatively to the average of the three reference, bedrock sites. The spectral ratios provide quantitative estimates of the seismic motion amplifications which occur in each of the monitored sites. Two sites show high values of amplification, 5 times larger than signal amplitude at the reference sites, in correspondence of well discernible peak frequencies of 5 Hz. Results for the other stations show smaller amounts of site amplification spreading over a broad range of frequencies. Sites where the highest amplifications were recorded all lie on the left bank of the Meschio River and in areas farther away from its outlet into the plain correlating with the presence of thick layers of Quaternary deposits.     

New Generation of Probabilistic Seismic Hazard Assessment for the Area Cologne/Aachen Considering the Uncertainties of the Input Data

A new earthquake catalogue for central, northern and northwestern Europe with unified M_w magnitudes, in part derived from chi-square maximum likelihood regressions, forms the basis for seismic hazard calculations for the Lower Rhine Embayment. Uncertainties in the various input parameters are introduced, a detailed seismic zonation is performed and a recently developed technique for maximum expected magnitude estimation is adopted and quantified. Applying the logic tree algorithm, resulting hazard values with error estimates are obtained as fractile curves (median, 16% and 84% fractiles and mean) plotted for pga (peak ground acceleration; median values for Cologne 0.7 and 1.2 m/s² for probabilities of exceedence of 10% and 2%, respectively, in 50 years), 0.4 s (0.8 and 1.5 m/s²) and 1.0 s (0.3 and 0.5 m/s²) pseudoacclerations, and intensity (I₀ = 6.5 and 7.2). For the ground motion parameters, rock foundation is assumed. For the area near Cologne and Aachen, maps show the median and 84% fractile hazard for 2% probability of exceedence in 50 years based on pga (maximum median value about 1.5 m/s²), and 0.4 s (>2 m/s²) and 1.0 s (about 0.8 m/s²) pseudoaccelerations, all for rock. The pga 84% fractile map also has a maximum value above 2 m/s² and shows similarities with the median map for 0.4 s. In all maps, the maximum values fall within the area 6.2–6.3° E and 50.8–50.9° N, i.e., east of Aachen.     

The effects of hazard zone information on judgements about earthquake damage

This study investigates the extent to which people's views on the causes and preventability of earthquake damage might be influenced by their degree of exposure to hazard as well as what information they have been given about the hazard. The results show that the provision of hazard zoning information influences judgements on preventability and causes of damage, but this effect depends on the degree of hazard faced by residents. In low hazard zones, information leads to the view that causes are manageable, whereas in high hazard zones information may induce a degree of fatalism. The use of public information in risk management needs to take into account the degree of risk faced by the recipients.     

GIS-based flood hazard mapping at different administrative scales: A case study in Gangetic West Bengal, India

This paper addresses the need for an efficient and cost-effective methodology for preparing flood hazard maps in data poor countries, particularly those under a monsoon regime where floods pose a recurrent danger. Taking Gangetic West Bengal, India, as an example and using available historical data from government agencies, the study compiled a regional map indicating hazard prone subregional areas for further detailed investigation, thereby isolating actual high risk localities. Using a GIS (Geographical Information System), a composite hazard index was devised incorporating variables of flood frequency, population density, transportation networks, access to potable water, and availability of high ground and maximum risk zones were mapped accordingly. A digital elevation model derived from high resolution imagery available in the public domain was used to calculate elevated areas suitable for temporary shelter during a flood. Selecting administrative units of analysis at the lowest possible scales – rural development blocks (regional) and revenue villages (subregional) – also ensures that hazard mapping is prepared in line with the existing rural planning and administrative authorities responsible for remedial intervention.     

Seismic Hazards Assessment for Radioactive Waste Disposal Sites in Regions of Low Seismic Activity

A comparative tectonic quiescence and lack of earthquakes make the stable centres of continents attractive for siting long-term radioactive waste storage facilities. The low rates of deformation in such regions, however, make it difficult to characterize their long-term seismotectonic behaviour, leading to uncertain estimates for the very low probability hazard estimates required by society. In an attempt to overcome the deficiency of both contemporary seismicity and paleoseismic data in central Canada, we have used earthquake histories from regions with similar seismotectonic characteristics from around the world. Substituting space for time, we estimate a long-term rate per 10⁶ km² of 0.004 magnitude ≥6 earthquakes per annum, of which 33–100% might rupture to the surface.     

贵州大方县公鸡山地裂缝特征成因及防治

文章通过对贵州省大方县以公鸡山地裂隙实地调查，认为地裂隙的形成主要与公鸡山一带地下采煤有关。即采煤虚脱，沿先存构造断裂拉张而成。同时叙述了地裂缝特征及危害，并提出防灾减灾措施。     

福建省滨海火电厂地质灾害问题及风险控制探讨

滨海火力发电厂工程主要包括厂区建筑、码头、管道、取排水、填海和贮灰场等工程。其主要面临着福建省海岸带构造运动、断裂及地震活动、港湾淤积、海底滑坡、软土地基、海底活动地貌、基岩不均匀风化以及人类工程活动等主要的灾害性地质因素。通过对这些因素潜在的致灾特点分析，提出了滨海火电厂地质灾害风险控制应包括选址阶段地质灾害风险回避、设计施工阶段地质灾害风险处理及运行阶段地质灾害风险监控等3方面。地质灾害风险评估是滨海火电厂地质灾害风险控制的首要任务。针对滨海电厂工程的特点，评估内容应着重于地质灾害危险性评估及易损性评估。选址阶段地质灾害风险回避主要是对构造不稳定的回避。地质灾害风险处理主要是电厂工程的基础处理及管道抗冲刷处理。电厂运行阶段地质灾害风险监控主要是对建筑物基础稳定性及海域冲淤变化的监控。