扬子地台西南缘传统型铂族矿产地质特征

传统型铂族矿产，系指与镁铁质岩浆成矿作用有关的铂族矿产资源。华力西运动时期，扬子地台西南缘沿超壳深断裂带发生的大陆裂谷作用，为来自上地幔的镁铁质(拉斑玄武岩质)岩浆的上涌和侵位提供了极为有利的前提条件。含铂基性超基性岩的时空分布，受到大陆裂谷作用的主要发生发展时期和裂谷活动带的控制。通过对典型矿床特征及其成矿作用的探讨，论述了扬子地台西南缘主要的铂族矿床类型；并从四维成矿的角度，阐述了对区域成矿规律的一些基本认识。     

Geological controls on rock mass classification of coal from Huntly East Mine, New Zealand

Rock Mass Rating (RMR) measurements from 65 sites within Huntly East underground coal mine are presented. All measurements are in coal, for which the dominant discontinuities are vertical cleat. Basic RMR values using two discontinuity spacings are presented: overall RMR based on the average spacing of all individual discontinuities; and cleat zone RMR based on the average spacing between zones of cleat. Cleat orientations are highly variable, but on average approximately parallel horizontal stress axes (face cleat follows maximum horizontal stress axis, butt cleat follows minimum horizontal stress axis).Contours of RMR variations throughout the mine are used to compare rock mass conditions with geological structure. It is apparent that: (1) RMR is least within downthrown fault blocks, and particularly immediately on the downthrown sides of faults, and greatest in upthrown fault blocks; and (2) RMR contours parallel horizontal stress axes within fault-bounded blocks, and bend to parallel faults at block boundaries. From similar contours for parameters contributing to RMR, the Rock Quality Designation (RQD), groundwater rating, and discontinuity condition rating create most of the observed variations in RMR. RQD is determined from the measured discontinuity frequency and hence is a measure of the degree of fracturing of the rock mass. This is interpreted as influencing the groundwater and condition parameters directly by allowing greater water ingress. Discontinuity frequency is greatest (least spacing) in the immediate vicinity of faults, and in downthrown fault blocks, generating low RMR values. Within fault blocks RQD varies little, so RMR contours align with cleat orientations.As RMR contours, faults, stress field and cleat orientation are clearly interrelated, there is unequivocally a connection between RMR and structural geology; this allows some predictive capacity in terms of ground conditions. If geological features can be accurately defined through either drilling programs or seismic surveys, then ground conditions may be predicted before panels are driven.     

The Shape and Volume of the Skaergaard Intrusion, Greenland: Implications for Mass Balance and Bulk Composition

Re-examination of the Skaergaard intrusion in the context ofits regional setting, combined with new data from explorationdrilling, has resulted in a revised structural model for theintrusion. It is modelled as an irregular box, c. 11 km fromnorth to south, up to 8 km from east to west, and 3·4–4km from the lower to the upper contact. The walls of the intrusionare inferred to follow pre-existing and penecontemporaneoussteep faults, and the floor and roof seem largely controlledby bedding planes in the host sediments and lavas, similar toregional sills. The suggested shape and volume are in agreementwith published gravimetric modelling. Crystallization alongall margins of the intrusion concentrated the evolving meltin the upper, central part of the intrusion, best visualizedas an ‘onion-skin’ structure inside the box. Thetotal volume is estimated to c. 280 ± 23 km³, of which13·7% are referred to the Upper Border Series (UBS),16·4% to the Marginal Border Series (MBS) and 69·9%to the Layered Series (LS). In the LS, the Lower Zone (LZ) isestimated to constitute 66·8%, the Middle Zone (MZ) 13·5%and the Upper Zone (UZ) 19·7%. The new volume relationshipsprovide a mass balance estimate of the major and trace elementbulk composition of the intrusion. The parental magma to theSkaergaard intrusion is similar to high-Ti East Greenland tholeiiticplateau basalts with Mg number c. 0.45. The intrusion representsthe solidification of contemporary plateau basalt magma trappedand crystallized under closed-system conditions in a crustalreservoir at the developing East Greenland continental margin. KEY WORDS: bulk composition; emplacement; mass proportions; Skaergaard intrusion; structure     

Curve-Fitting Schemes for Fragmentation Data

Fragmentation measurements in the form of sieve passing and mass fraction data were used to test the capability of three different distributions to fit the observed data over a wide range in fragment size and mass. These distributions were based on Rosin-Rammler, lognormal and simple sigmoidal (S-shaped) functions, having 2 input parameters for the single-component versions and 5 input parameters for the two-component versions. Provided convergence was achieved in the non-linear curve-fitting technique, the two-component versions always provided superior fits to the observed data. However, these versions were very sensitive to variations in the values chosen for the input parameters. In this particular regard, the two-component sigmoidal function was the most robust. The present results also show that the two-component lognormal function provided the best fit to the fragmentation data in a general sense, and the two-component Rosin-Rammler function provided the worst fit. However, there was not a significant difference between any of the three methods.     

Fuzzy set approaches to classification of rock masses

Rock mass classification is analogous to multi-feature pattern recognition problem. The objective is to assign a rock mass to one of the pre-defined classes using a given set of criteria. This process involves a number of subjective uncertainties stemming from: (a) qualitative (linguistic) criteria; (b) sharp class boundaries; (c) fixed rating (or weight) scales; and (d) variable input reliability. Fuzzy set theory enables a soft approach to account for these uncertainties by allowing the expert to participate in this process in several ways. Hence, this study was designed to investigate the earlier fuzzy rock mass classification attempts and to devise improved methodologies to utilize the theory more accurately and efficiently. As in the earlier studies, the Rock Mass Rating (RMR) system was adopted as a reference conventional classification system because of its simple linear aggregation.

The proposed classification approach is based on the concept of partial fuzzy sets representing the variable importance or recognition power of each criterion in the universal domain of rock mass quality. The method enables one to evaluate rock mass quality using any set of criteria, and it is easy to implement. To reduce uncertainties due to project- and lithology-dependent variations, partial membership functions were formulated considering shallow (<200 m) tunneling in granitic rock masses. This facilitated a detailed expression of the variations in the classification power of each criterion along the corresponding universal domains. The binary relationship tables generated using these functions were processed not to derive a single class but rather to plot criterion contribution trends (stacked area graphs) and belief surface contours, which proved to be very satisfactory in difficult decision situations. Four input scenarios were selected to demonstrate the efficiency of the proposed approach in different situations and with reference to the earlier approaches.     

Holocene calcrete crust deposits on the moraine of Batura Glacier, northern Pakistan

Abstract   Calcretes can be observed on the surface of old moraines around Batura Glacier in the upper Hunza Valley, Karakoram Mountains, Pakistan. They develop as a calcareous crust cementing small gravels under boulders. In order to understand the genesis of the calcrete crust, a variety of methods were employed: (i) study of mineralogy and geochemistry of a calcrete crust precipitated on the lateral moraine using X-ray diffractometer and electron probe microanalysis; (ii) analysis of solute chemistry of surface water and ice bodies around the Batura Glacier; and (iii) accelerator mass spectrometry ¹⁴C dating of the crust itself. The results indicate that the calcrete crust has definite laminated layers composed of a fine-grain and compact calcite layer, and a mineral fragment layer. The chemical composition of the calcite layer is approximately 60% CaO and 1% MgO. The mineral fragment layer consists of rounded grain materials up to 0.2 mm in diameter. It shows a graded bedding structure with fine grains of quartz, albite and muscovite. Meanwhile, as the Paleozoic Pasu limestone is distributed around the terminal of Batura Glacier, Ca cations dissolve in the melt water of the glacier. Accordingly, the calcrete crust is precipitated by decreases in CO₂ partial pressure from glacier ice and evaporation of the melt water, including high concentration of Ca²⁺ at ephemeral streams and small ponds stagnating between the moraine and glacial ice. On the basis of the AMS ¹⁴C age, the calcrete is considered to have formed approximately 8200 calibrated years bp under the Batura glacial stage.     

Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.     

在卸荷产生拉剪情况下裂隙岩体的力学行为

据岩体在卸荷情况下的拉剪应力状态,确定了节理岩体的线弹性断裂力学模型。依照此模型,可以得到相对远离裂隙(该位置的点到裂隙中心的距离比裂缝长度大)且受裂隙影响区域内应力、应变和变形方程。这些对评估裂隙岩石变形有重要的参考意义。通过用理论方程的计算结果和卸荷情况下试验观测所得的数据对比,证明该模型应用于实际工程中具有可行性。     

Assimilation and Fractional Crystallization Controlled by Transport Process of Crustal Melt: Implications from an Alkali Basalt-Dacite Suite from Rishiri Volcano, Japan

Mechanisms of fractional crystallization with simultaneous crustalassimilation (AFC) are examined for the Kutsugata and Tanetomilavas, an alkali basalt–dacite suite erupted sequentiallyfrom Rishiri Volcano, northern Japan. The major element variationswithin the suite can be explained by boundary layer fractionation;that is, mixing of a magma in the main part of the magma bodywith a fractionated interstitial melt transported from the mushyboundary layer at the floor. Systematic variations in SiO₂ correlatewith variations in the Pb, Sr and Nd isotopic compositions ofthe lavas. The geochemical variations of the lavas are explainedby a constant and relatively low ratio of assimilated mass tocrystallized mass (‘r value’). In the magma chamberin which the Kutsugata and Tanetomi magmas evolved, a strongthermal gradient was present and it is suggested that the marginalpart of the reservoir was completely solidified. The assimilantwas transported by crack flow from the partially fused floorcrust to the partially crystallized floor mush zone throughfractures in the solidified margin, formed mainly by thermalstresses resulting from cooling of the solidified margin andheating of the crust. The crustal melt was then mixed with thefractionated interstitial melt in the mushy zone, and the mixedmelt was further transported by compositional convection tothe main magma, causing its geochemical evolution to be characteristicof AFC. The volume flux of the assimilant from the crust tothe magma chamber is suggested to have decreased progressivelywith time (proportional to t^–1/2), and was about 3 x 10^–2m/year at t = 10 years and 1 x 10^–2 m/year at t = 100years. It has been commonly considered that the heat balancebetween magmas and the surrounding crust controls the couplingof assimilation and fractional crystallization processes (i.e.absolute value of r). However, it is inferred from this studythat the ratio of assimilated mass to crystallized mass canbe controlled by the transport process of the assimilant fromthe crust to magma chambers. KEY WORDS: assimilation and fractional crystallization; mass balance model; magma chamber; melt transport; Pb isotope