地下RC结构物地震响应特征土工离心试验的模拟

地下结构物抗震稳定性的研究具有重要实际意义。基于动态土工离心试验,应用有效应力法分析了不同水平地震作用下土层和地下RC结构物的最大水平位移、不同埋深的土层加速度和超孔隙水压力变化规律,以及结构物的破坏发展特征,并进一步与试验结果进行了相互验证和对比,取得了较好效果,为重要地下结构物的抗震设计提供了依据和参考。     

瑞利阻尼对砂土场地非线性地震响应的影响分析

在地震荷载作用下,自由场地会产生土体侧向变形和地表响应放大现象。由于土体的高度非线性,计算自由场地地震响应时,不同的阻尼比及剪切模量取值是造成其计算结果与试验结果相差较大的原因之一。目前动力计算常采用瑞利阻尼方法,其系数取值会在一定程度上影响计算结果。选用两模态简化瑞利阻尼系数计算方法,分析土体阻尼比及控制频率的取值对计算结果的影响,对比离心机模型试验,利用开源有限元平台OpenSees,采用适合于土体动力分析的多屈服面本构模型(PDMY),建立剪切梁模型模拟三维自由场地,并分析瑞利阻尼参数对自由场地地震响应和侧向变形计算结果的影响。结果表明,针对相对密度为60%的Nevada干砂,阻尼比为4%、控制频率比为5时,场地响应计算结果与试验结果较为符合。综合分析显示场地非线性响应时域计算时,应特别注意选用的瑞利阻尼参数值。     

分形几何在岩土力学研究中的过去、现在与未来

首先简略地介绍了分形几何理论及其方法。从岩土材料结构的定量描述、流体在岩土体中的渗流问题、岩土材料强度的分形模型和分形空间的力学特征四个方面叙述了分形理论在岩土力学研究中取得的成果及应用。指出只有将岩土力学系统在欧氏空间的各种基本变量、原理和方法向分形空间推广和拓展,才能产生对岩土材料非线性力学行为的新认识,这也是分形理论在岩土力学研究中进一步深化的基础。     

Colloid particle sizes in the Mississippi River and some of its tributaries,from Minneapolis to below New Orleans

An on-board technique was developed that combined discharge-weighted pumping to a high-speed continuous-flow centrifuge for isolation of the particulate-sized material with ultrafiltration for isolation of colloid-sized material. In order to address whether these processes changed the particle sizes during isolation, samples of particles in suspension were collected at various steps in the isolation process to evaluate changes in particle size. Particle sizes were determined using laser light-scattering photon correlation spectroscopy and indicated no change in size during the colloid isolation process. Mississippi River colloid particle sizes from twelve sites from Minneapolis to below New Orleans were compared with sizes from four tributaries and three seasons, and from predominantly autochthonous sources upstream to more allochthonous sources downstream. © 1998 John Wiley & Sons, Ltd.     

Centrifuge modeling of buried continuous pipelines subjected to normal faulting

Seismic ground faulting is the greatest hazard for continuous buried pipelines.Over the years,researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method.The lack of well-documented field case histories of pipeline failure from seismic ground faulting and the cost and complicated facilities needed for full-scale experimental simulation mean that a centrifuge-based method to determine the behavior of pipelines subjected to faulting is best to verify numerical approaches.This paper presents results from three centrifuge tests designed to investigate continuous buried steel pipeline behavior subjected to normal faulting.The experimental setup and procedure are described and the recorded axial and bending strains induced in a pipeline are presented and compared to those obtained via analytical methods.The influence of factors such as faulting offset,burial depth and pipe diameter on the axial and bending strains of pipes and on ground soil failure and pipeline deformation patterns are also investigated.Finally,the tensile rupture of a pipeline due to normal faulting is investigated.     

高聚物外包盾构隧道离心机振动台试验研究

为了验证非水反应聚氨酯高聚物(后文简称高聚物)外包盾构隧道具有减震性能,对高聚物外包盾构隧道模型和无外包隧道模型,采用离心机振动台进行对比试验。针对中密砂土围岩,在不同阵型特征的地震波输入下,对比有无高聚物外包隧道加速度、频谱、隧道动力响应和地表沉降,分析高聚物的减震性能。试验结果表明:在不同地震激励的工况下,对于有无高聚物外包的隧道模型,其加速度和频谱差别不大;二者隧道各点上的动应变平均相差31.32%;高聚物外包层隧道模型地表的最终沉降分别比无外包隧道模型和自由场地表沉降约小20%和50%。试验证明高聚物对盾构隧道有减震作用,此试验研究为高聚物在今后的工程应用提供参考依据。     

Seismic hazard assessment for derivation of earthquake scenarios in Risk-UE

The main features of the Risk-UE project approach to assessing the ground-shaking (and related hazards) distribution within urban areas are described, as a basis for developing seismic damage scenarios for European cities. Emphasis was placed in the project on adoption of homogeneous criteria in the quantitative treatment of seismicity and in constructing the ground-shaking scenarios, despite wide differences in amount and quality of data available for the cities involved. The initial steps of the approach include treatment of the regional seismotectonic setting and the geotechnical zonation of the urban area, while the hazard assessment itself takes the form of both a deterministic analysis, and of a probabilistic, constant-hazard spectra analysis. Systematic 1D site response analyses were used, mostly in the softer soil zones, to modify (when needed) the obtained ground motion maps. Earthquake induced hazard effects, such as liquefaction and landsliding, are also briefly dealt with at the end.     

Seismic microzonation studies for the city of Ragusa (Italy)

The seismic history of the city of Ragusa (Italy), the geotechnical characterisation of the subsoil and the site response analysis should be correctly evaluated for the definition of the Seismic Geotechnical Hazard of the city of Ragusa, through geo-settled seismic microzoning maps. Basing on the seismic history of the city of Ragusa, the following earthquake scenarios have been considered: the “Val di Noto” earthquake of January 11, 1693 (with intensity X–XI on MCS scale, magnitude M_W=7.41 and epicentral distance of about 53 km); the “Etna” earthquake of February 20, 1818 (with intensity IX on MCS scale, magnitude M_W=6.23 and epicentral distance of about 64 km); the Vizzini earthquake of April 13, 1895 (with intensity I=VII–VIII on MCS scale, magnitude M_W=5.86 and epicentral distance of about 26 km); the “Modica” earthquake of January 23, 1980 (with intensity I=V–VI on MCS scale, magnitude M_W=4.58 and epicentral distance of about 10 km); the “Sicilian” earthquake of December 13, 1990 (with intensity I=VII on MCS scale, magnitude M_W=5.64 and epicentral distance of about 50 km). Geotechnical characterisation has been performed by in situ and laboratory tests, with the definition of shear wave velocity profiles in the upper 30 m of soil. Soil response analyses have been evaluated for about 120 borings location by some non-linear 1-D models. Finally the seismic microzonation of the city of Ragusa has been obtained in terms of maps with different peak ground acceleration at the surface; shaking maps for the central area of the city of Ragusa were generated via GIS for the earthquake scenarios.     

面板对加筋土挡墙影响的离心模型试验研究

加筋土挡墙因其特有的景观性能、协调变形性能而日益受到设计者青睐。面板作为加筋土挡墙的组成部分,对墙体的承载能力影响显著。针对现有设计规范无法考虑面板形式对结构自身力学变形特性的影响,设计并开展了整体式与分块式面板的离心模型试验。数据测试分析显示：整体式面板加载期的位移小于分块式面板位移;由于分块式面板位移较大,所以其水平土压力小于整体式面板土压力;加筋土挡墙面板底部存在应力集中现象;分块式面板筋-土界面的摩擦系数发挥值大于整体式面板数值,但两者均小于设计规范建议值;由于模型筋材长度较长并且连接件的存在,导致原型设计较为保守。