上海市长江口及邻近海域地质调查现状及展望

海洋区域地质调查近年来逐渐得到重视,海洋地质调查技术的发展也为开展海洋区域地质调查奠定了基础。上海地区社会经济发展对地质工作的需求,为摸清上海市长江口及邻近海域的地质现状提出了必然要求。本文在系统整理长江口及邻近海域地质资料的基础上,重点分析了区内存在的重点地质问题和研究存在的问题,根据海洋地质调查的技术发展,结合国内相关地区的调查经验,对长江口及邻近海域内区域地质调查进行了展望,提出了采用综合物探技术、地质取样和测试分析进行综合地质环境调查的建议,并对具体采用的调查技术和调查内容进行了论述。     

论南岭成矿带大宝山斑岩型铜矿的特殊性及其勘查意义

广东省大宝山矿床是南岭成矿带唯一的大型铜多金属矿床，此次研究在矿区中南部发现了细脉浸染状铜矿的新类型。为确定其是否为斑岩型铜矿的成因类型，本文在梳理南岭成矿带铜成矿条件和成矿规律的基础上，查明了矿区中南部英安斑岩的蚀变和铜矿化特征。综合研究认为南岭成矿带早侏罗世中酸性斑岩的小岩体较多，叠加多期断裂构造和碳酸盐岩建造，非常有利于铜多金属成矿物质的运移、富集。大宝山英安斑岩发育黑云母化、钾长石化、青磐岩化、绢英岩化、泥化等蚀变类型，铜矿化与绢英岩化、绿泥石化关系密切。大宝山铜矿中的英安斑岩沿逆冲推覆构造侵位并呈岩墙状产出，冷却过程中受区域构造应力产生了一组平行裂隙，岩浆房去气作用排出的热液沿裂隙蚀变围岩并充填成矿。大宝山斑岩型铜矿取得的找矿勘查成果表明，“全位成矿，缺位找矿”理念可以有效指导靶区圈定和老矿山外围（深部）找矿勘查，早侏罗世的南岭具有形成较大规模斑岩型铜矿的条件。     

寒武系古流体地球化学特征及其对页岩气保存的指示意义 ——以中扬子地区寒武系页岩气发现井宜地2井为例

保存条件是中扬子地区页岩气富集的关键因素之一，宜地2井是中扬子寒武系页岩气发现井，通过对该井全井段岩芯裂缝古流体的地球化学分析，探讨了寒武系古流体成因和对水井沱组页岩气保存条件的指示意义。结果认为：① 覃家庙组膏岩层之上方解石脉缺少Fe2+、Mn2+，且δ13C和δ18O值较围岩偏负，指示其形成于氧化的环境，石牌组方解石脉δ13C偏负，黄铁矿脉δ34S值与膏盐相似，表明其成因与TSR密切相关；水井沱组脉体δ13C和δ18O与围岩相似，形成于封闭的环境。② 方解石脉包裹体群SO42-、Ca2+、Mg2+含量整体上由覃家庙组向上向下分别递减，钠氯系数以水井沱组最低，整体上向上升高，表明覃家庙组是高盐度卤水的主要来源，水井沱组受外来流体影响弱；包裹体水溶液δD和δ18O也指示娄山关组、石牌组方解石脉成因分别与大气水、TSR相关。③ 古流体地球化学研究表明宜昌地区页岩气保存条件整体较好，页岩气散失的主要通道是垂直裂缝，页岩气保存条件好与膏盐盖层发育、后期构造破坏弱、脉体对裂缝的及时封闭以及白垩系盖层等因素密切相关。     

A combined study of macroseismic data and focal mechanisms applied to the West-Bohemian earthquake,Czechoslovakia

The main shock of the West-Bohemian earthquake swarm, Czechoslovakia, (magnitudem=4.5, depthh=10 km) exhibits an irregular areal distribution of macroseismic intensities 6° to 7° MSK-64. Four lobes of the 6° isoseismal are found and the maximum observed intensity is located at a distance of 8 km from the instrumentally determined epicentre. This distribution can be explained by the energy flux of the directS wave generated by a circular source, the hypocentral location and focal mechanism of which are taken from independent instrumental studies. The theoretical intensity, which is assumed to be logarithmically proportional to the integrated squared ground-motion velocity (i.e.,I=const+log v ² (t)dt), fits the observed intensity with an overall root-mean-square error less than 0.5°. It is important that the present intensity data can also be equally well explained by the isotropic source. The fit was attained by means of a horizontally layered model though large fault zones and an extended sedimentary basin suggest a significant lateral heterogeneity of the epicentral region. The results encourage a broader application of the simple modelling technique used.     

论四川盆地三叠系地下水水文地质条件

四川盆地三叠系地下水可划分出碎屑岩孔隙裂隙和碳酸盐岩岩溶裂隙两大储集类型。按此处构造开启程度和埋深条件等的不同,下中三叠统地下水有沉积变质水和渗入淋滤水两种基本成因类型,水动力特征各异。沉积变质水处于深埋封闭条件,受地静压力驱动控制;渗入淋滤水分布于背斜露头区和浅部地区,受静水压力驱动控制。并由此控制了盆地三叠系盐类的保存条件。     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

Fe and Mn in calcites cementing red beds: A record of oxidation–reduction conditions: Examples from the Catalan Coastal Ranges (NE Spain)

Fe and Mn occur in calcite cements depending on the oxidizing–reducing conditions of cementing waters, which may change according to depositional and diagenetic environments. In red beds, Mn and Fe are available from the ferruginous matrix. Thus, it is possible to know the oxidizing–reducing conditions of fluids that precipitated calcite as a function of Mn and Fe content in calcite cement. A detailed petrological (with special attention to cathodoluminescence) and geochemical analysis of these cements is a useful tool to constrain the diagenetic evolution of red beds and the history of the basin where they deposited.     

Hydrogeology of thermal waters in Viterbo area, central Italy

A conceptual hydrogeological model of the Viterbo thermal area (central Italy) has been developed. Though numerous studies have been conducted on its geological, geochemical and geothermal features, there is no generalized picture defining the origin and yield of the hydrothermal system. These latter aspects have therefore become the objectives of this research, which is based on new hydrogeological and geochemical investigations. The geological setting results in the coexistence of overlapped interacting aquifers. The shallow volcanic aquifer, characterized by fresh waters, is fed from the area around the Cimini Mountains and is limited at its base by the semiconfining marly-calcareous-arenaceous complex and low-permeability clays. To the west of Viterbo, vertical upflows of thermal waters of the sulphate-chloride-alkaline-earth type with higher gas contents, are due to the locally uplifted carbonate reservoir, the reduced thickness of the semiconfining layer and the high local geothermal gradient. The hot waters (30–60°C) are the result of deep circulation within the carbonate rocks (0.5–1.8 km) and have the same recharge area as the volcanic aquifer. The upward flow in the Viterbo thermal area is at least 0.1 m³/s. This flow feeds springs and deep wells, also recharging the volcanic aquifer from below.     

Temperature dependence of large-scale water-retention curves: a case study

A local-scale model for temperature-dependence of water-retention curves may be applicable to large scales. Consideration of this temperature dependence is important for modeling unsaturated flow and transport in the subsurface in numerous cases. Although significant progress has been made in understanding and modeling this temperature effect, almost all the previous studies have been limited to small scales (on the order of several centimeters). Numerical experiments were used to investigate the possibility of extending a local-scale model for the temperature-dependence of water retention curves to large scales (on the order of meters). Temperature effects on large-scale hydraulic properties are of interest in many practical applications. Numerical experiment results indicate that the local-scale model can indeed be applicable to large-scale problems for special porous media with high air entry values. A typical porous medium of this kind is the porous tuff matrix in the unsaturated zone of Yucca Mountain, Nevada, the proposed geologic disposal site for national high-level nuclear wastes. Whether this finding can approximately hold for general cases needs to be investigated in future studies.     

Control of dust emissions by geomorphic conditions, wind environments and land use in northern China: An examination based on dust storm frequency from 1960 to 2003

The degree to which dust emissions are controlled by geomorphic conditions, wind environments and land use was investigated using the dust storm frequency (DSF) and data from more than 300 meteorological stations throughout northern China. Our analysis showed that most dust emissions originated in gobi deserts that developed in piedmont alluvial fans of the Kunlun, Qilian and Helan mountains. Dust emissions are low from other gobi desert regions, such as the northern Gurbantunggut and eastern Taklimakan, where high vegetation coverage restrained dust emissions or where dust-size particles are not abundant after a long period of strong wind erosion. Sandy deserts with relatively high vegetation coverage or an extensive cover by mobile sands are not a major dust source. Although the highest dust emissions did not appear in regions with the highest wind energy, DSF trends in each region from 1960 to 2003 were closely related to local wind activity. DSF was low in regions with high levels of human activity, where the mean DSF from 1960 to 2003 did not exceed 4 days/year; even from the 1960s to the early 1970s, the period with the greatest DSF, frequency did not exceed 8 days/year, which indicates that extensive land use did not contribute to DSF. The low DSF in these areas might result from the fact that although land use could produce abundant fine soil fractions, vegetation coverage and soil moisture remained higher than in the gobi deserts of arid China, thereby decreasing dust-storm occurrence.