Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

Effect of the chemical composition of the crust on the metamorphic evolution of orogenic wedges

Petrological data provide a good record of the thermal structure of deeply eroded orogens, and, in principle, might be used to relate the metamorphic structure of an orogen to its deformational history. In this paper, we present two‐dimensional thermal modelling of various subduction models taking into account varying wedge geometry as well as variation of density and topography with metamorphic reactions. The models clearly show that rock type accreted in the wedge has important effects on the thermal regime of orogenic wedges. The thermal regime is dominated by radiogenic heat production. Material having high radioactive heat production, like the granodioritic upper crust, produces high temperature metamorphism (amphibolitic conditions). Material with low radioactive heat production results in low temperature metamorphism of greenschist or blueschist types depending on the thickness of the wedge. Application of this model to seemingly unrelated areas of the Central Alps (Lepontine Dome, Grisons) and Eastern Alps (Tauern Window) explains the coexistence and succession of distinct Barrovian and blueschist facies metamorphic conditions as the result of a single, continuous tectonic process in which the main difference is the composition of the incoming material in the orogenic wedge. Accretion of the European upper continental crust in the Lepontine and Tauern Domes produces Barrovian type metamorphism while accretion of oceanic sediments results in blueschist facies metamorphism in the Valaisan domain.     

青藏高原1∶25万区域地质调查地貌年代学研究

高原隆升及剥蚀作用的复杂性与区域差异性以及高原恶劣的气候、地理条件,使得在青藏高原空白区1∶25万区域地质调查中进行地貌年代学研究具有很大的现实意义.由于地貌是高原隆升、环境演化、新构造运动等的信息载体,地貌年代有助于重塑这些地质作用的发生时间及发展过程,因此地貌年代学研究具有重要的技术意义.1∶25万银石山幅的工作表明,地貌年代学调查对高原隆升及环境演化过程研究具有良好效果.     

Oxygen isotope composition and geothermometry of granulite to greenschist facies metamorphic rocks: a study from the Neoproterozoic collision-related nappe system, south of São Francisco Craton, SE Brazil

Oxygen isotope studies were carried out across units of a Neoproterozoic nappe system, south of São Francisco Craton. A temperature decrease toward the base of the system is found, consistent with a previously recognized inverted metamorphic pattern. The tectonic contact of the basal unit and the reworked southern São Francisco craton show a steep temperature gradient, suggesting that low temperature thrusting acted as the dominant tectonic process. The contrasts between the δ¹⁸O values of the Três Pontas-Varginha and Carmo da Cachoeira nappes and the differences among the samples and minerals are consistent with the preservation of sedimentary isotopic composition during metamorphism. The small differences in the δ¹⁸O values between the undeformed and the deformed calc-silicate samples (1.6‰) suggest that the δ¹⁸O value of mylonitization fluids was close to that which equilibrated with the metamorphic assemblage. The distinct δ¹⁸O values of metapelitic and calc-silicate samples and the great temperature difference from one type to the other indicate that no large-scale fluid interaction processes occurred during metamorphism. Oxygen isotopic estimations of both Três Pontas-Varginha undeformed rocks and Carmo da Cachoeira unaltered equivalents indicate δ¹⁸O values of up to 18‰. Comparison between these values and those from the ‘basement’ orthogneisses (8.3–8.5‰) indicates the latter are not sources for the metapelites.     

岩体变形模量的尺寸效应

岩土工程中,现场岩体的承压板试验和变形试验可看作是不同尺寸岩体的变形试验。在某工程的现场岩石力学试验中,对同一组试点的岩体先后进行了承压板变形试验和承载力试验,研究了岩体变形模量的尺寸效应,结果表明,岩体变形模量主要受岩体中的裂隙发育状况控制,当岩体质量较好时,可以由承载力试验曲线来确定岩体的变形特性,这一做法具有一举两得的效果。     

岩体工程质量分级应用研究

岩体质量评价采用的测试技术包括地质勘察、弹性波检测和室内岩石力学试验。结合水布垭水利枢纽大坝建基岩体工程质量评价实例,对岩体工程质量分级的应用进行了研究。     

对目前岩石“全曲线”测试的若干看法

从电液伺服岩石压力试验机工作机理的角度,对目前岩石应力-应变全过程曲线(以下简称“全曲线”)测试中的一些问题进行了分析,提出了自己的看法,目的是为了解决“全曲线”测试的2个问题,即如何测出“全曲线”;如何使测出的“全曲线”真实反映岩石的力学特性,并将其用到工程中。     

小湾电站高边坡系统锚固与排水的优化设计方法

据小湾电站地下厂房进水口开挖高边坡的岩体结构与工程地质特征,采用基于结构面网络模拟的随机楔体稳定分析方法对边坡的稳定性进行了三维分析。进一步运用风险分析理论对边坡系统锚杆与预应力锚索的布置进行了优化设计,最后运用结构面网络模拟理论对排水方案进行了优化设计。     

兴山县龙王嘴边坡稳定性分析与加固设计

龙王嘴边坡系坡高达70 m、坡角达70 °的高陡岩质边坡。分析了宜-秭公路石峡段龙王嘴高边坡变形的地质条件,在定量评价龙王嘴高边坡稳定性的基础上,进行了该高边坡的施工图加固设计。根据其特点将350 m长的坡段分为A,B,C三个区,分别采取预应力锚索与锚杆加固、挂网喷射混凝土支护和喷射混凝土支护等措施,实践证明,工程治理效果良好。     

宜兴抽水蓄能电站试验洞的反分析研究

结合江苏宜兴抽水蓄能电站地下厂房试验洞量测资料的分析,研究了成层各向异性岩体中洞室工程问题的反分析方法。采用分层均质模型进行反分析计算。计算区域的各层岩层均被分别视为均质各向同性体,初始地应力假设呈线性分布。有限元分析中,对倾斜成层的岩层、软弱夹层及断层节理等分别划分了单元,据以模拟成层岩体的各向异性特征。为使计算过程简化,对离洞室较远的岩层拟按地质资料对材料特性参数赋值,反分析计算的目标未知数为初始地应力和试验洞相邻围岩的弹性模量。结果表明,与工程实践符合较好。