Displacement transfer from fault-bend to fault-propagation fold geometry: An example from the Himalayan thrust front

The leading edge of the ENE-trending Himalayan thrust front in Pakistan exhibits along-strike changes in deformational style, ranging from fault-bend to fault-propagation folds. Although the structural geometry is very gently deformed throughout the Salt Range, it becomes progressively more complex to the east as the leading edge of the emergent Salt Range Thrust becomes blind. Surface geology, seismic reflection, petroleum well, and chronostratigraphic data are synthesized to produce a 3-D kinematic model that reconciles the contrasting structural geometries along this part of the Himalayan thrust front. We propose a model whereby displacement was transferred, across a newly-identified lateral ramp, from a fault-bend fold in the west to fault-propagation folds in the east and comparable shortening was synchronously accommodated by two fundamentally different mechanisms: translation vs. telescoping. However, substantially different shortening distribution patterns within these structurally contrasting segments require a tear fault, which later is reactivated as a thrust fault. The present geometry of this S-shaped displacement transfer zone is a combined result of the NW–SE compression of the lateral culmination wall and associated tear fault, and their subsequent modification due to mobilization of underlying ductile salt.     

Inference of a detailed P–T path from P–T pseudosections using metapelitic rocks of variable composition from a single outcrop, Shackleton Range, Antarctica

Generally, P–T pseudosections for reduced compositional systems, such as K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O, Na₂O–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O and MnO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O, are well suited for inferring detailed P–T paths, comparing mineral assemblages observed in natural rocks with those calculated. Examples are provided by P–T paths inferred for four metapelitic samples from a 1 m² wide outcrop of the Herbert Mountains in the Shackleton Range, Antarctica. The method works well if the bulk composition used is reconstituted from average mineral modes and mineral compositions (AMC) or when X‐ray fluorescence (XRF) data are corrected for Al₂O₃ and FeO. A plagioclase correction is suitable for Al₂O₃. Correction for FeO is dependent on additional microscopic observations, e.g. the kind and amount of opaque minerals. In some cases, all iron can be treated as FeO^tot, whereas in others a magnetite or hematite correction yields much better results. Comparison between calculated and observed mineral modes and mineral compositions shows that the AMC bulk composition is best suited to the interpretation of rock textures using P–T pseudosections, whereas corrected XRF data yield good results only when the investigated sample has few opaque minerals. The results indicate that metapelitic rocks from the Herbert Mountains of the Northern Shackleton Range underwent a prograde P–T evolution from about 600 °C/5.5 kbar to 660 °C/7 kbar, followed by nearly adiabatic cooling to about 600 °C at 4.5 kbar.     

Strongly peraluminous granites of Mesozoic in Eastern Nanling Range,southern China: Petrogenesis and implications for tectonics

The strongly peraluminous granites (SPGs) of Eastern Nanling Range (ENR) are a characteristic of all bearing highly aluminous minerals, such as muscovite±AI-rich biotite±tourmaline±garnet, and lack of cordierite. In respect of petrography, geochemistry, Nd isotope, and single grain zircon U-Pb dating, the representative granite bodies of them are studied. The research shows that these granites were emplaced in two stages, namely 228-225 Ma BP and J2-3 159-156 Ma BP, belonging to Indosinian and early Yanshanian periods, respectively, and they have low εNd(t) values (-10.6--11.1), high A/CNK, Rb/Sr ratios and tDM values (1887-1817 Ma), and REE's tetrad effect (TE1,3=1.13-1.34). In comparison with related geology, petrology and chronology of granites in adjacent regions, it is suggested that Indosinian SPGs of ENR formed in the circumstance of post-collisional extension 20 Ma after the major collision of Indosinian Movement (258-243 Ma BP) in Indo-China Peninsula, and early Yanshanian SPGs formed in the     

Constraining models of the tectonic setting of the giant Olympic Dam iron oxide–copper–gold deposit, South Australia, using deep seismic reflection data

In the Gawler Craton, the completeness of cover concealing the crystalline basement in the region of the giant Olympic Dam Cu–Au deposit has impeded any sufficient understanding of the crustal architecture and tectonic setting of its IOCG mineral-system. To circumvent this problem, deep seismic reflection data were recently acquired from  250 line-km of two intersecting traverses, centered on the Olympic Dam deposit. The data were recorded to 18 s TWT ( 55 km). The crust consists of Neoproterozoic cover, in places more than 5 km thick, over crystalline basement with the Moho at depths of 13–14 s TWT ( 40–42 km). The Olympic Dam deposit lies on the boundary between two distinct pieces of crust, one interpreted as the Archean–Paleoproterozoic core to the craton, the other as a Meso–Neoproterozoic mobile belt. The host to the deposit, a member of the  1590 Ma Hiltaba Suite of granites, is situated above a zone of reduced impedance contrast in the lower crust, which we interpret to be source-region for its  1000 °C magma. The crystalline basement is dominated by thrusts. This contrasts with widely held models for the tectonic setting of Olympic Dam, which predict extension associated with heat from the mantle producing the high temperatures required to generate the Hiltaba Suite granites implicated in mineralization. We use the seismic data to test four hypotheses for this heat-source: mantle underplating, a mantle-plume, lithospheric extension, and radioactive heating in the lower crust. We reject the first three hypotheses. The data cannot be used to reject or confirm the fourth hypothesis.     

Climate during the last glacial maximum in the Wasatch and southern Uinta Mountains inferred from glacier modeling

Recent improvements in understanding glacial extents and chronologies in the Wasatch and Uinta Mountains and other mountain ranges in the western U.S. call for a more detailed approach to using glacier reconstructions to infer paleoclimates than commonly applied AAR-ELA-ÄT methods. A coupled 2-D mass balance and ice-flow numerical modeling approach developed by [Plummer, M.A., Phillips, F.M., 2003. A 2-D numerical model of snow/ice energy balance and ice flow for paleoclimatic interpretation of glacial geomorphic features. Quaternary Science Reviews 22, 1389–1406] allows exploration of the combined effects of temperature, precipitation, shortwave radiation and many secondary parameters on past ice extents in alpine settings. We apply this approach to the Little Cottonwood Canyon in the Wasatch Mountains and the Lake Fork and Yellowstone Canyons in the south-central Uinta Mountains. Results of modeling experiments indicate that the Little Cottonwood glacier required more precipitation during the local Last Glacial Maximum (LGM) than glaciers in the Uinta Mountains, assuming lapse rates were similar to modern. Model results suggest that if temperatures in the Wasatch Mountains and Uinta Mountains were  6 °C to 7 °C colder than modern, corresponding precipitation changes were  3 to 2× modern in Little Cottonwood Canyon and  2 to 1× modern in Lake Fork and Yellowstone Canyons. Greater amounts of precipitation in the Little Cottonwood Canyon likely reflect moisture derived from the surface of Lake Bonneville, and the lake may have also affected the mass balance of glaciers in the Uinta Mountains.     

The influence of upper-crust lithology on topographic development in the central Coast Ranges of California

A fundamental geological tenet is that as landscapes evolve over graded to geologic time, geologic structures control patterns of topographic distribution in mountainous areas such that terrain underlain by competent rock will be higher than terrain underlain by incompetent rock. This paper shows that in active orogens where markedly weak and markedly strong rocks are juxtaposed along contacts that parallel regional structures, relatively high topography can form where strain is localized in the weak rock. Such a relationship is illustrated by the topography of the central Coast Ranges between the Pacific coastline and the San Andreas fault zone (SAFZ), and along the length of the Gabilan Mesa (the “Gabilan Mesa segment” of the central Coast Ranges). Within the Gabilan Mesa segment, the granitic upper crust of the Salinian terrane is in contact with the accretionary-prism mélange upper crust of the Nacimiento terrane along the inactive Nacimiento fault zone. A prominent topographic lineament is present along most of this lithologic boundary, approximately 50 to 65 km southwest of the SAFZ, with the higher topography formed in the mélange on the southwest side of the Nacimiento fault.This paper investigates factors influencing the pattern of topographic development in the Gabilan Mesa segment of the central Coast Ranges by correlating shortening magnitude with the upper-crust compositions of the Salinian and Nacimiento terranes. The fluvial geomorphology of two valleys in the Gabilan Mesa, which is within the Salinian terrane, and alluvial geochronology based on optically-stimulated luminescence (OSL) age estimates, reveal that the magnitude of shortening accommodated by down-to-the-southwest tilting of the mesa since 400 ka is less than 1 to 2 m. Our results, combined with those of previous studies, indicate that at least 63% to 78% of late-Cenozoic, northeast-southwest directed, upper-crustal shortening across the Gabilan Mesa segment has been accommodated within the Nacimiento terrane. This is significant because perpendicular to orogenic strike the Nacimiento terrane constitutes less than ¼ of the distance between the coast and the SAFZ, and the other ¾ (or greater) of the distance between the coast and the SAFZ is underlain by the granitic upper crust of the Salinian terrane. We propose that strain and mountain building are localized within the Nacimiento terrane because it consists predominantly of the relatively weak Franciscan Complex mélange, and because the upper crust of the Salinian terrane is composed of relatively strong granitic rocks. Our hypothesis is supported by the distribution of post-seismic surface uplift associated with the 2003, 6.5 M_W San Simeon earthquake, which mimics the topography of the southwestern part of the Gabilan Mesa segment of the central Coast Ranges.     

Facies and architectural element analysis of a meandering fluvial succession: The Permian Warchha Sandstone, Salt Range, Pakistan

The 30 to 155 m thick Early Permian (Artinskian) Warchha Sandstone of the Salt Range, Pakistan is a conglomerate, sandstone and claystone succession within which seven lithofacies types (Gt, St, Sp, Sr, Sh, Fl and Fm) occur in a predictable order as repeated fining-upward cycles. Common sedimentary structures in the conglomerates and sandstones include planar and trough cross-bedding, planar lamination, soft sediment-deformed bedding, compound cosets of strata with low-angle inclined bounding surfaces and lags of imbricated pebbles. Structures in the finer-grained facies include desiccation cracks, raindrop imprints, caliche nodules and bioturbation. Groups of associated facies are arranged into nine distinct architectural elements (channels, gravel bars, sandy bedforms, downstream and laterally accreting barforms, sand sheets, crevasse splays, levees, floodplain units and shallow lakes), which is consistent with a fluvial origin for the succession. The types of architectural elements present and their relationship to each other demonstrate that the Warchha Sandstone preserves a record of a meandering river system that drained the northern margin of Gondwanaland. The dominance of fine-grained (floodplain) facies over gravel-grade (channel-base) facies and the widespread occurrence of large-scale lateral accretion elements supports the interpretation of a high-sinuosity, meandering fluvial system in which channel bodies accumulated via the lateral accretion of point bars but in which the active channels covered only a small part of a broad floodplain at any time instant. Although the regional and temporal distribution of these deposits is complex, in broad terms the lower part is dominated by stacked, multistorey channel bodies, whereas single-storey channel elements isolated in abundant fine-grained floodplain deposits dominate the middle and upper parts of the formation.     

A latest Pleistocene and Holocene glacial history and paleoclimate reconstruction at Three Sisters and Broken Top Volcanoes, Oregon, U.S.A.

At least three sets of moraines mark distinct glacial stands since the last glacial maximum (LGM) in the Three Sisters region of the Oregon Cascade Range. The oldest stand predates 8.1 ka (defined here as post-LGM), followed by a second between ∼ 2 and 8 ka (Neoglacial) and a third from the Little Ice Age (LIA) advance of the last 300 years. The post-LGM equilibrium line altitudes were 260 ± 100 m lower than that of modern glaciers, requiring 23 ± 9% increased winter snowfall and 1.4 ± 0.5°C cooler summer temperatures than at present. The LIA advance had equilibrium line altitudes 110 ± 40 m lower than at present, implying 10 ± 4% greater winter snowfall and 0.6 ± 0.2°C cooler summer temperatures.     

Quantifying sedimentation patterns of small landslide-dammed lakes in the central Oregon Coast Range

Understanding sedimentation patterns in small coastal watersheds due to landscape perturbations is critical for connecting hillslope and fluvial processes, in addition to managing aquatic habitats for anadromous fish and other aquatic species in the Oregon Coast Range (OCR). Changes in sedimentation patterns spanning the last 250 years are preserved in two landslide-dammed lakes in small watersheds (< 10 km²) underlain by the Tyee Formation in the central OCR. Dendrochronology of drowned Douglas-fir stumps in both lakes provided precise timing of the damming and formation of the lakes, with Klickitat Lake forming in winter ad 1751/52 and Wasson Lake in winter ad 1819/20. Perturbations from wildfires, logging and road development, and previously underappreciated snow events affect sedimentation rates in the lakes to different degrees, and are identified in the sediment record using cesium-137 (¹³⁷Cs), high-resolution charcoal stratigraphy, local fire records, and aerial photography. Each lake has variable sedimentation accumulation rates (0.05–4.4 cm yr⁻¹) and mass accumulation rates (0.02–1.42 g cm⁻² yr⁻¹). Sedimentation rates remained low from the landslide-damming events until the mid-19th century, when they increased following stand-replacing wildfires. Aside from a sediment remobilization triggered by human modification of the landslide dam at Klickitat Lake around 1960, the largest peaks in mass accumulation rates in the mid-20th century at both lakes in the early 1950s precede major road construction and logging activity in the watersheds. Subsequent sedimentation rates are lower, but variable, and possible effects of logging and road development might be exacerbated by abnormal precipitation and heavy snow events. A comparison of previous studies of landslide-dammed lakes in larger watershed of the OCR are consistent with our findings of increased sedimentation in the mid-20th century, as well as higher sedimentation rates in the debris-flow dominated southern Tyee Formation than in the lower-relief northern Tyee Formation.