Development of joints and shear fractures in the Kuqa depression and its implication to regional stress field switching

The superimposed basin must have undergone the changes of regional stress field. Study on the nature and switch of regional stress field of superimposed basin is very useful to understanding its stress state and tectonic events during its formation and evolution. As sensitive markers of small stress changes, joint and shear fracture, characterized by consistency of orientation over wide area, can be used to reconstruct paleostress state and its evolution. Detailed observations and analysis on the orientations, geometrical patterns, sequences of joints and shear fractures and their chronological relation to faults and folds show that, the NEE-SWW systematic joints and NNW-SSE systematic joints developed in the Mesozoic and Cenozoic strata are much more prominent than NW-SE systematic joints and shear fractures with different orientations. And the NWW-SEE and NW-SE systematic joints formed later than NEE-SWW systematic joints but earlier than shear fractures with different orientations. According to the relationships between joint and shear fractures and stress, the NEE-SWW systematic joints are inferred to result from lateral weak extension caused by the late Cretaceous regional uplift, while the NNW-SSE and NW-SE systematic joints are interpreted as syn-tectonic deformation relating to strong N-S compression in the Neogene. But some conjugate shear fractures occur probably due to sinistral strike-slip faulting in the Kuqa depression. At the beginning of the Neogene, the stress field changed and the maximal principal stress σ1 switched from vertical to horizontal.     

Experimental research on reservoir sensitivity to stress and impacts on productivity in Kela 2 Gas Field

Kela 2 Gas Field, with high formation pressure (74.35MPa), high pressure coefficient (2.022) and difficulty of potential test and evaluation, is the largest integrated proved dry gas reservoir in China so far and the principal source for West-East Gas Development Project. In order to correctly evaluate the elastic-plastic deformation of rocks caused by the pressure decline during production, some researches, as the experiment on reservoir sensitivity to stress of gas filed with abnormal high pressure, are made. By testing the rock mechanic properties, porosities and permeabilities at different temperature and pressure of 342 core samples from 5 wells in this area, the variations of petro-physical properties at changing pressure are analyzed, and the applicable inspection relationship is concluded. The average productivity curve with the reservoir sensitivity to stress is plotted on the basis of the research, integrated with the field-wide productivity equation. The knowledge lays a foundation for the gas well productivity evaluation in the field and the gas field development plan, and provides effective techniques and measures for basic research on the development of similar gas fields.     

Evaluation of soil liquefaction in the Chi-Chi, Taiwan earthquake using CPT

During the 1999 Chi-Chi, Taiwan earthquake, many sand boiling phenomena were observed in central Taiwan, which caused severe ground settlement and structure damages. According to the installed accelerograms, the peak ground surface horizontal accelerations in the liquefaction-affected areas range from 774.42 to 121.3 gal. The writers carried out an extensive investigation of soil liquefaction in this earthquake. In this paper, we present results of the CPT exploration and post-earthquake liquefaction analysis. Two hundred and seventy five (275) cone penetration test data were collected from the liquefaction-affected areas, and 46 liquefaction case histories and 88 non-liquefaction case histories were derived that can be used to evaluate the accuracy of existing liquefaction evaluation models. In addition, the strength of the liquefied soils after earthquake and the implication of its liquefaction potential in the future event are discussed.     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.     

3-D rheologic model of earthquake preparation (II): Strain field and its applications

Introduction Based on the elastic theory of the hard inclusion (Dobrovolskii, 1991), we developed an inclusion theory of rheologic medium, and applied the results of bulk-strain field of a rheologic inclusion model to explain the spatial-temporal evolution process of earthquake precursors (SONG, et al, 2000). In the former paper (SONG, et al, 2003), we derived the viscoelastic displacement field of the rheologic inclusion model on the basis of the analytic expression of displacement field o…     

时域瞬变场电磁场有限差分法

模拟电磁场在地下介质中的传播规律是理解地下介质响应的重要手段，直接应用有限差分法在时间域对二维、三维瞬变场进行数值分析是一种有效方法。应用反映电磁场基本规律的麦克斯韦方程组，导出时域场量的齐次扩散方程，对所研究的空间区域作差分离散，源作为初始条件加入，采用合适的边界条件，利用差分方程进行计算，从而得到场量的数值结果，展现瞬变场在地下随时间扩散的全过程，对电磁场的瞬态响应有更加直观的了解。     

SH波对无限介质土中衬砌结构的动应力集中

运用复变函数法和保角映射法对无限介质土中的衬砌结构进行分析.通过引入两个势函数将弹性介质的控制方程解耦成两个Helmholtz方程.利用所得势函数的通解,得到无限土介质和衬砌结构的位移和应力的表达式,利用无限介质与衬砌结构之间的连续性条件和衬砌结构内边界上的边界条件,可确定波函数展开式中的末知系数,并给出动应力集中系数的数值结果.     

双剪统一强度准则改进及其在岩土工程中的应用

在分析Mohr-Coulomb强度准则和双剪统一强度准则的基础上,提出了主剪面应力对和主剪面应力对的作用这2个新概念,并以此为出发点,通过考虑十二面体单元主剪面上所有3个主剪面应力对的共同作用,在双剪强度准则的基础上提出了一个新准则,并对其作了极限线分析.应用该新强度准则研究了静水压力条件下圆形巷道围岩弹塑性分析和土压力计算问题.研究表明,该准则不仅能较好地非线性反映岩土的3个基本强度特征,还解决了双剪统一准则中存在的双重破坏角问题.     

Analysis of geomagnetic field along seismic profile P4 of the International Project POLONAISE'97

This paper presents relative secular variations of the total intensity of the geomagnetic field against a background of results of magnetic anomaly interpretation along seismic profile P4. Profile P4 crosses a Variscan folding zone in the Paleozoic Platform (PLZ), the Trans-European Suture Zone (TESZ), and the Polish part of the East European Craton (EEC). Secular geomagnetic field variations measured in 1966–2000 along a line adjacent to seismic profile P4 were analysed. The study of secular variations, reduced to the base recordings at the Belsk Magnetic Observatory, showed that the growth of geomagnetic field at the East European Craton was slower than in the Trans-European Suture Zone and the Paleozoic Platform.A 2D crustal magnetic model was interpreted as a result of magnetic modelling, in which seismic, geological and geothermal data were also used. The modelling showed that there were significant differences in the magnetic model for geotectonic units, which had been earlier determined based on deep seismic survey data. It should be noted that a fundamental change of trend of the relative secular variations was observed at the slope of the Precambrian Platform. After analysing the geomagnetic field observed along profile P4, the hypothesis that the contact between Phanerozoic and Precambrian Europe lies in Poland's territory can be proven.     

Triaxial stress state deep in orogenic belts: an example from Turkey

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.