中国东部苏鲁榴辉岩超基性岩褶皱带的演化及其与大别(中国)和柯切塔夫(哈萨克斯坦)杂岩的对比(英文)

苏鲁褶皱带形成于元古宙 (2 2 33～ 185 5Ma)典型优地槽构造环境 ,主要由石榴橄榄岩、石榴辉石岩、榴辉岩等侵入岩 (柯石英深度相地幔岩浆房中形成 )和它们的火山沉积建造围岩一起经褶皱、变质而形成。变质作用经历了先蓝片岩相 (前花岗岩 )后片麻岩混合岩相过程。由于变质作用的不规律性 ,苏鲁褶皱带可分为 2个构造带 :(1)东部构造带 (蓝片岩 )和 (2 )西部构造带 (片麻岩混合岩 )。根据A·都城秋穗所识别的变质带系统 ,可将其作为一个双变质带。东部构造带以出现许多块状、条带状榴辉岩辉石岩橄榄岩组合的残余岩块为特征 ,其中还残留着高压的矿物 (石榴石、绿辉石、柯石英 ) ,而且有被混合岩和各种交代岩替代的显著标志。在中生代 ,苏鲁元古褶皱带受造山作用的影响活化 ,导致许多花岗岩体的侵入 ,使交代岩广泛发育。     

论金属矿物生物组构分类体系

探讨了金属矿物生物组构的分类体系，将金属矿物的生物组构分为：(1)金属矿物的生物有机胶体组构，由生物直接成矿作用形成；(2)交代作用成因的金属矿物生物组构，由生物间接成矿作用形成。组构又分为结构和构造两个亚类。以典型的实例资料叙述了各种金属矿物生物组构的特征。     

Fluid mixing as the mechanism of formation of the Dajing Cu-Sn-Ag-Pb-Zn ore deposit,Inner Mongolia ——Fluid inclusion and stable isotope evidence

Since the 1990s, interest in the magmatic fluids and their relation to mineralization has been re-aroused[1—6]. Studies on stable isotopes of low-sulfidation deposits commonly show the predominance of meteoric water[7]. Paradoxically, the evidence for me…     

Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.     

Crustal structure beneath the Songpan—Garze orogenic belt

The Benzilan-Tangke deepseismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE.Based on the travel times and the related amplitudes of phases in the record sections,the 2-D P-wave crustal structure was ascertained in this paper.The velocity structure has quite strong lateral variation along the profile.The crust is divided into 5layers,where the first,second and third layer belong to the upper crust,the forth and fifth layer belong to the lower crust.The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile,and it integrates into the overlying low velocity basement in the area to the north of Ma‘erkang.The crustal structure in the section can be divided into 4parts:in the south of Garze-litang fault,between Garze-Litang fault and Xianshuihe fault,between Xianshuihe fault and Longriba fault and in the north of Longriba fault,which are basically coincided with the regional tectonics division.The crustal thickness decreases from southwest to northeast along the profile,that is ,from62km in the region of the Jinshajiang River to 52km in the region of the Yellow River.The Moho discontinuity does not obviously change across the Xianshuihe fault basesd on the PmP phase analysis.The crustal average velocity along the profile is lower,about 6.30 km/s.The Benzilan-Tangke profile reveals that the crust in the study area is orogenic.The Xianshuihe fault belt is located in the central part of the profile,and the velocity is positive anomaly on the upper crust,and negative anomaly on the lower crust and upper mantle.It is considered as a deep tectonhic setting in favor of strong earthquake‘s accumulation and occurrence.     

山东惠民凹陷中央隆起带古近系沙河街组层序地层特征及控制因素研究

结合山东惠民凹陷中央隆起带古近系层序地层学研究,依据层序中湖平面变化特点和相应的沉积物特征,提出了构造运动和气候是本区层序地层发育的主要控制因素。中央隆起带古近系沙河街组二、三、四亚段可划分为 3种层序类型,即断陷初期型、强断陷期型和断陷后期型层序。由于构造运动导致湖岸线向盆地方向退缩,产生下降体系域,本次研究采用了体系域的四分法,即一个完整层序由低位、湖侵、高位和下降四个体系域组成,并且层序界面位于湖平面最大下降的位置,介于下降域和低位域之间。断陷初期红色地层层序,受气候因素控制明显,既不同于冲积地层层序,也不同于正常湖相地层层序,在层序演化上有其独特的特点。受构造作用和沉积物补给条件的影响,研究区发育三种沉积密集段,不同类型的沉积密集段在层序中所处位置不同,控制着不同的烃源岩厚度和油气资源储量。     

苏北榴辉岩中水晶的形成时代及其对超高压变质岩折返的示踪意义

江苏东海水晶以其晶体粒大和产量巨大而闻名，在地质上也因其产于高压超高压变质带而独具特色。在对大别—苏鲁超高压变质带的区域成矿作用进行研究和对中国大陆科学钻探工程(CCSD)主孔岩心进行编录的过程中，认识到超高压带存在着超低压成矿现象，包括中国最主要的水晶矿床成矿带在内的许多矿床都可能是在超高压变质之后退变质结束阶段的超低压环境中形成的，对水晶进行流体包裹体的Rb-Sr等时线年代学研究，获得208Ma的等时线年龄，表明成矿时代为印支期。该年代可视为超高压变质带折返并经历了退变质之后而“稳定”下来的时间。     

冀北地区金矿床He、Ar、Pb同位素组成及其成矿物质来源

成矿物质来源一直是成矿理论研究和找矿实践的焦点问题。选择了冀北地区3个幔枝构造金矿集中区11个金矿床黄铁矿及部分围岩进行了He、Ar同位素测定。研究表明,冀北地区主要金矿的3He/4He的值域为(0.93～7.30)×10-6,平均3.55×10-6;R/Ra=0.66～4.93,平均2.53;40Ar/36Ar=426～2073,40Ar平均为8.20×10-7cm3/g,4He/40Ar平均为2.17。矿区外围片麻岩和花岗岩的3He/4He值仅为(0.001～0.55)×10-6,反映来源上有明显差别。3He和4He在He同位素浓度图上落于地幔区附近。64个Pb同位素数据表现为矿质以幔源为主,确有部分壳源物质加入。研究认为,本区成矿物质应源于地球深部,随地幔柱多级演化,深部成矿流体由地球深部迁移到浅部,期间不可避免地存在壳幔流体的混合作用,故其值域往往界于地幔和地壳之间。     

易门式大型铜矿床构造成矿动力学模型

针对金属矿床隐伏矿定位预测的关键问题,在提出构造成矿动力学的分支学术方向的基础上,以易门式大型铜矿床为例,从成矿地质背景、矿田构造、构造地球化学和成矿构造应力场等方面进行构造成矿动力学研究,阐述在构造应力场控制下成矿流体运移和聚集的规律。构造地球化学研究认为,构造地球化学异常反映矿体的原生晕;构造地球化学异常受构造控制,其分带特征可指示成矿流体的流向,并提供矿床成因和隐伏矿(化)体相对埋深的信息。构造应力场的控矿特征主要表现在:构造应力场导致控矿构造的形成,并驱动成矿流体的运移;构造应力场控制了成矿能量场;应力和能量的高值集中区分布特点可反映某些构造型式。在此基础上建立构造成矿动力学模型,概括隐伏矿成矿预测准则,据此提出若干重点找矿靶区和靶位,其中部分靶区得到工程验证,表明构造成矿动力学方法对隐伏矿定位预测和评价具有重要的指导意义。     

喜马拉雅造山带中段定结地区拆离断层

定结地区位于喜马拉雅造山带中段,发育大量的低角度伸展拆离断层,这些拆离断层中部分构成了藏南拆离系的主体。它们基本上垂直于造山带走向伸展,各拆离断层特征显著,普遍发育糜棱岩,糜棱岩类型复杂,主要有硅质糜棱岩、长英质糜棱岩、花岗质糜棱岩。在研究区的北部,拆离断层呈环状产出,构成变质核杂岩三层结构中的中间层,规模一般较大;同时拆离断层使变质核杂岩体盖层中的部分地层拆离减薄;在研究区南部拆离断层呈线状延伸很远,总体上平行造山带延伸,构成了藏南拆离系重要组成部分。部分拆离断层同韧性剪切带平行产出,形成拆离剪切的脆韧性体系。