考虑地形起伏和障碍体破裂的汶川地震强地面运动数值模拟

2008年5月12日四川汶川地区发生M_W7.9地震,震中位置103.4°E,31.06°N.这次地震造成了以汶川、映秀为中心及其周边地域建筑物的严重破坏和人员的重大伤亡,且因为高山等地形复杂区域抢险救灾的艰巨性,为及时救援造成很大干扰.为更好理解地形因素对于强地面数值模拟结果的影响,建立了包含地形起伏影响及去除地形影响的两类模型.同时,依据震源破裂过程运动学反演结果,建立了包含障碍体破裂过程的震源滑动模型,实现断层分段、空间倾角以及滑移角的动态设定.基于动力学的地震动模拟方法,通过对地震波传播过程的数值计算和后处理分析,模拟由地震激发的区域强地面运动过程.结果显示：（1）强震动台站的断层距对地形效应具有放大或抑制作用,距离断层破裂带越近,地形效应越明显,反之,距离越远,则地形效应越微弱;（2）因为地形高差与障碍体的影响,地震造成的峰值可能出现在震中区域之外;（3）考虑地形影响模型的地表峰值速度（PGV）区域位于汶川与北川附近;而未考虑地形影响模型的PGV区域位于灌县—江油断层的后半段,处清平、安县附近;对汶川地震近实时强地面运动波场的模拟、峰值图谱的圈定及未来大地震强地面运动特征的预测都有重要指示意义.     

高温高压条件下彭灌杂岩的强度对汶川地震发震机制的启示

采用汶川地震震源区彭灌杂岩中代表性细粒花岗岩样品,在固体围压介质三轴实验系统上开展了高温高压流变实验研究.实验的温度和压力条件按照龙门山断层带5~30 km深度对应的温度和压力（静岩压）设定.利用偏光显微镜和扫描电镜对实验样品进行微观结构观察.实验结果表明,实验样品在10~20 km深度都具有很高的强度,彭灌杂岩在该深度处于脆性破裂-脆塑性转化域,而在20~30 km实验样品强度显著降低,彭灌杂岩进入塑性流变域,这与流变结构中的极限强度很接近.以花岗岩为代表的彭灌杂岩的破裂强度决定了中上地壳的强度,在15~20 km深度不仅强度达到最大值,而且控制了断层不稳定滑动,具备地震成核条件.因此,把彭灌杂岩强度随深度变化规律与流变结构和滑动稳定性参数（a-b）结合起来得出,彭灌杂岩在15~20 km的高强度是汶川地震的孕育和发生的必要条件.     

复经验正交函数在水温预报中的应用

复经验正交函数（ＣＥＯＦ）是一种新的物理场的分解方法，它除了可以揭示物理场的时、空分布和变化规律外，还可以反映波动或平流效应。故本文首次将该方法移植到预报方法研究上来，建立了渤海、黄海的表、底层水温预报方案。为了检验该预报方案的可靠性，试报的结果除与实测值进行比较外，同时还与依据经验正交函数（ＥＯＦ）建立预报方法的预报结果进行了对比。结果表明，对于南、北黄海表层水温的试报结果，ＣＥＯＦ方法试报的平均绝对误差比ＥＯＦ方法预报的误差平均小０．２℃；而对于底层水温，两种方法的预报误差相近。     

Perceptions of Climate Change and Adaptation Responses in a Local Community: the Barwon Estuary Complex,Victoria

The climate change focus in Australia has shifted from mitigation to adaptation with an emphasis on place-specific case studies. The Barwon Estuary Complex (BEC) on the Bellarine Peninsula, central Victoria, was the focus of this place-specific study in which 37 local stakeholders were consulted through a series of semi-structured interviews on the impacts of climate change on their coastal community. Overall there was uniformity in stakeholder perceptions of the climate change impacts and vulnerabilities pertaining to the BEC. In contrast, discussion on adaptation drew a diversity of responses. While 53 per cent of stakeholders indicated a need to limit the use of hard structures, and rather plan around a changing estuarine environment, opinion amongst the community group was divided. Some believed ‘retreat is the only option’ whilst others felt ‘there won't be much leaving’. The present level of confusion around adaptation highlights the imperative of commencing discussions now to allow sufficient time to develop strategies which are both environmentally and socially responsible. This is important as ultimately it will be the community that will determine whether adaptation strategies are adopted or met with resistance.     

复合载体夯扩桩在邳州地区的应用

介绍了复合载体夯扩桩加固机理、技术特点、适用条件及工艺要求。通过介绍邳州地区地层特点,分析了复合载体夯扩桩技术在邳州地区的应用情况并对工程进行了实例分析,得出进一步推广应用具有广阔的前景。     

A 3D structural analysis of the Goliat field,Barents Sea,Norway

The Goliat field consists of Middle to Late Triassic reservoirs which exploit an elongate anticline (the Goliat anticline) in the hanging wall of the Troms-Finnmark Fault Complex (TFFC), offshore Norway. The area is affected by a dense network of multiple trending fault populations which historically have inhibited seismic resolution owing to persistent fault shadow. Seismic investigations utilising a multi-azimuth three-dimensional survey (EN0901) allow much crisper delineation of seismic features previously unattainable by vintage single-azimuth surveys. Three dominant fault populations are identified in the area, two of which parallel TFFC segments, the Alke–Goliat (WSW–ENE) and the Goliat–Tornerose (NNE–SSW) segments. The Goliat field is located within a zone of intersection between both segments. A third E–W trending fault population, the Hammerfest Regional population, is likely influenced by the offshore extension of the Trollfjord-Komagelv Fault Complex (TKFZ). A local NW–SE trending fault population, the Goliat Central, affects the Goliat anticline and partitions Alke–Goliat and Goliat–Tornerose subsidiary faults resulting in curvilinear traces. Several cross-cutting relationships between fault populations are observed and may provide fluid compartmentalisation in the reservoirs. Compilation of regional transects and the EN0901 survey provides new insight into the evolution of the Goliat anticline which is underlain by a fault-bound basement terrace that became established in the Late Palaeozoic. The structure is interpreted to have formed due to vertical segmentation of the TFFC and cores the overlying broad anticline. The western limb of the Goliat anticline likely formed by differential compaction, whereas the eastern limb is primarily a result of hanging wall roll-over linked to variable listric to ramp-flat-ramp fault geometry. Rifting took place in the Palaeozoic (Carboniferous to Permian?), and in the Mesozoic, possibly as early as the Late Triassic, with a major event in the Late Jurassic to Early Cretaceous. Minor reactivations continued into the Late Cretaceous, and possibly the Early Cenozoic. Mesozoic syn-kinematic geometries in the hanging wall of the Goliat–Tornerose TFFC segment are consistent with deposition during up section propagation of a blind fault, over which, a monocline was established and later breached. Jogs (abrupt orientation changes) in fault traces, transverse folds (associated with displacement maxima/minima) and vertical fault jogs suggest the TFFC existed as a greater number of segments prior to amalgamation during the Late Triassic to Jurassic. A phase of Barremian inversion created local compression structures above blind extensional faults, and deeper seated buttressing against large faults. Polygonal faults affect the Late Cretaceous to Early Cenozoic successions.     

Distinct metamorphic evolution of alternating silica-saturated and silica-deficient microdomains within garnet in ultrahigh-temperature granulites: An example from Sri Lanka

Here we report the occurrence of garnet porphyroblasts that have overgrown alternating silica-saturated and silica deficient microdomains via different mineral reactions. The samples were collected from ultrahigh-temperature (UHT) metapelites in the Highland Complex, Sri Lanka. In some of the metapelites, garnet crystals have cores formed via a dehydration reaction, which had taken place at silica-saturated microdomains and mantle to rim areas formed via a dehydration reaction at silica-deficient microdomains. In contrast, some other garnets in the same rock cores had formed via a dehydration reaction which occurred at silica-deficient microdomains while mantle to rim areas formed via a dehydration reaction at silica-saturated microdomains. Based on the textural observations, we conclude that the studied garnets have grown across different effective bulk compositional microdomains during the prograde evolution. These microdomains could represent heterogeneous compositional layers (paleobedding/laminations) in the precursor sediments or differentiated crenulation cleavages that existed during prograde metamorphism. UHT metamorphism associated with strong ductile deformation, metamorphic differentiation and crystallization of locally produced melt may have obliterated the evidence for such microdomains in the matrix. The lack of significant compositional zoning in garnet probably due to self-diffusion during UHT metamorphism had left mineral inclusions as the sole evidence for earlier microdomains with contrasting chemistry.     

BFA-CM最优化测井解释方法

最优化测井解释方法能充分利用各种测井资料及地质信息,可以有效地评价复杂岩性油气藏.优化算法的选择是最优化测井解释方法的关键,影响着测井解释结果的准确性.细菌觅食算法(BFA)是新兴的一种智能优化算法,具有较强的全局搜索能力,但在寻优后期收敛速度较慢.复合形算法(CM)局部搜索能力极强,将其与BFA算法相结合构成BFA-CM混合算法,既提高了搜索精度又提高了搜索效率.利用BFA-CM最优化测井解释方法对苏里格致密砂岩储层实际资料进行了处理,计算结果与岩心及薄片分析资料吻合得很好.     

复杂山地随机介质GMM-ULTI法射线追踪

对复杂山地介质的非均质性以及介质中地震波运动学特征进行深入研究,对于提高复杂山地区域地震勘探的效果有着重要的理论意义和实际价值.为了研究复杂山地非均质性和该介质中地震波的一些运动特性,提出了一种复杂山地随机介质的建模方法和一种新的射线追踪算法.与常规算法相比,复杂山地随机介质的生成方法采用更贴近实际介质特点的梯度介质作为背景介质,并在模型生成过程中加入地形修正步骤;新提出的GMM-ULTI射线追踪算法,充分融合群推进法、迎风思想、走时插值法的优势,采用先计算走时后追踪射线路径的两步策略完成射线追踪.算法分析与计算实例表明:复杂山地随机介质的生成方法能灵活、精细且更贴近实际地刻画复杂山地介质的非均质特点;新射线追踪算法兼顾精度和效率、能无条件稳定且灵活地适应复杂山地随机介质的特点;同时基于对几个模型试算结果的分析也得出了复杂山地随机介质中的地震波的一些传播规律.     

Common‐shot Fresnel beam migration based on wave‐field approximation in effective vicinity under complex topographic conditions

Gaussian beam migration is a versatile imaging method for geologically complex land areas, which overcomes the limitation of Kirchhoff migration in imaging multiple arrivals and has no steep‐dip limits of one‐way wave‐equation migration. However, its imaging accuracy depends on the geometry of Gaussian beam that is determined by the initial parameter of dynamic ray tracing. As a result, its applications in exploration areas with strong variations in topography and near‐surface velocity are limited. Combined with the concept of Fresnel zone and the theory of wave‐field approximation in effective vicinity, we present a more robust common‐shot Fresnel beam imaging method for complex topographic land areas in this paper. Compared with the conventional Gaussian beam migration for irregular topography, our method improves the beam geometry by limiting its effective half‐width with Fresnel zone radius. Moreover, through a quadratic travel‐time correction and an amplitude correction that is based on the wave‐field approximation in effective vicinity, it gives an accurate method for plane‐wave decomposition at complex topography, which produces good imaging results in both shallow and deep zones. Trials of two typical models and its application in field data demonstrated the validity and robustness of our method.