滇西北石鼓片岩变质变形特征及其划分

滇西北金沙江结合带东侧的石鼓变质岩系，可划分为石鼓岩群和巨甸岩群。石鼓岩群受区域动力热流变质作用改造，主期变形环境为中、深部构造相；巨甸岩群受区域低温动力变质作用改造，与之相伴的构造形迹属中、浅部构造相。石鼓岩群包含羊坡岩组和露西岩组，巨甸岩群可进一步划分为陇巴岩组和塔城岩组。同一岩群的岩组，变质作用、构造变形特征相同，但变质岩石组合及原岩特征却有明显差别。     

Parameters affecting maximum fluid transport in large aperture fractures

We present results of laboratory experiments to study the behavior of liquids moving in unsaturated wide-aperture fractures. A 5-mm-thick glass plate cut with a 1.7-mm aperture was used as a fractured rock analog to study behavior of film and capillary droplet flow modes. Flow rates ranged between 0.6 and 6.0 ml/min. Variability in the ambient barometric pressure, resulting from weather conditions, seemed to play a role in the natural selection of flow mode. For droplet mode, constant input conditions resulted in highly variable transport properties within the fracture. The advancing meniscus exhibited a dynamic contact angle that was a function of the droplet speed and much larger than the static contact angle. Flow rate was reduced due to the larger contact angle. Analytical expressions for droplet velocity and flow capacity are presented as a function of the dynamic rather than the static contact angle.     

Temporal variations of shear-wave splitting in field and laboratory studies in China

Observations of shear-wave splitting at seismic stations above a swarm of small earthquakes on Hainan Island, China, and other examples world-wide, suggest that the time-delays of split shear-waves monitor the build up of stress before earthquakes and the stress release as earthquakes occur. Rock physics experiments on marble specimens also show variations of shear-wave time-delays with uniaxial pressure analogous to the field observations. The rock experiments show an abrupt decrease in time-delays immediately before fracturing occurs. Similar precursory behaviour has been observed before earthquakes elsewhere, and is believed to be important for two reasons. Precursory changes in shear-wave splitting could be used for short-term forecasting, but of greater importance may be the information such behaviour provides about the source processes in earthquake preparation zones.     

Geotechnical and geoenvironmental characteristics of man-made underground structures in Cappadocia, Turkey

Underground cities and semi-underground settlements, most of which are 1500 years at least, exist in the Cappadocia Region of Turkey. These man-made rock structures are carved in soft tuffs and the best examples of long-term performance of man-made structures in the field of rock engineering. The tuffs also have good thermal isolation properties to be used as housing and storage of foods. In this article, the authors are only concerned with physical and short-term mechanical characteristics due to the wide-spectrum of the theme and the in situ characterization of the Cappadocia tuffs, and the results of investigations are presented. In addition, a critical overview on possible engineering geological problems at Cappadocia with mechanical aspects of historical and modern rock structures and their implications in rock engineering is made. From the experimental results in the field, it is evident that the engineering characteristics of these rocks do not show significant changes in vertical and horizontal directions. However, they are prone to atmospheric conditions. In addition, temperature and humidity measurements at different floors of the underground cities and various parts of semi-underground settlements indicated that variations in climatic conditions of the openings are very small when compared to those outside the ground surface.     

Deformation at Stromboli volcano (Italy) revealed by rock mechanics and structural geology

We approach the reconstruction of the recent structural evolution of Stromboli volcano (Italy) and the analysis of the interplay between tectonics, gravity and volcanic deformation. By tying together structural, lithostratigraphic and rock mechanics data, we establish that since 100 ka BP, the edifice has faulted and jointed mainly along NE-striking planes. Faults mostly dip to the NW with normal displacement. Taking also into account the presence of a NW-trending regional least principal stress and of tectonic earthquake hypocenters inside the cone, we suggest that this fracturing can be related to the transmission of tectonic forces from the basement to the cone. Dyking concentrated along a main NE-trending weakness zone (NEZ) across the volcano summit, resembling a volcanic rift, whose geometry is governed by the tectonic field. In the past 13 ka, Stromboli experienced a reorganisation of the strain field, which was linked with the development of four sector collapses affecting the NW flank, alternating with growth phases. The tectonic strain field interplayed with dyking and fracturing related to unbuttressing along the collapse shoulders. We propose that tectonics control the geometry of dykes inside the cone and that these, in turn, contribute to destabilise the cone flanks.     

锦屏Ⅰ级水电站坝区岩体结构面特征研究

本文根据锦屏Ⅰ级水电站坝区体结构面野外调资料，对坝区结构面优势方位、间距、张开度、连通率、隙间充填物及形态特征进行了分析，为坝区岩体分类及其物理力学参数的确定提供了重要依据。     

南京湖山地区棒锤山纵向断层的发现及其地质意义

作者在野外数学中发现，棒锤山人工露头上存在一条重要的纵向断层，经研究认为、棒锤山纵向断层反映了汤－仑推覆体在其发展中至少存在两次明显的应力释放过程，它可能与两次大的构造推覆及应力集中有关。     

Stability analysis of rock wedges with multiple sliding surfaces

Summary Although wedge and plane sliding stability analyses are well established in the geotechnical literature, certain geologic environments produce blocks which cannot be adequately modelled as either wedges or plane slides. An example is blocks forming in cylindrically folded sedimentary rocks, where the surface of sliding is neither a single plane nor a double plane but is curved. This type of block may be idealized as a prismatic block with multiple sliding planes, all with parallel lines of intersection. If the sliding planes number three or more, the distribution of normal forces, and hence the factor of safety, is indeterminate. A new analytical model for sliding stability analysis is described in which the distribution of normal forces on the contact planes is chosen to minimize the potential energy of the system. The classic wedge and plane solutions are shown to be special cases of this more general model, which allows determination of the safety factor for any shape of prismatic contact surface. An example from Tennessee concerning a block with a curved sliding surface is described and the factor of safety compared with the standard wedge analysis. It is shown that with three or more contact planes, the safety factor may be significantly lower than that calculated from the wedge model, which provides an upper limit on stability.     

The fountains of Pretoria

The occurrence of groundwater in South Africa is to a very large degree limited to a surficial zone of weathered and fractured hard rock formations. Primary aquifers include narrow strips of alluvium along certain river stretches and to Cenozoic coastal deposits. Coupled with a rainfall that is well below the world average, South Africa is therefore poorly endowed with large springs. These are almost totally confined to karst areas.     

内蒙古科尔康油田沙海组储集层的岩石学特征

根据碎屑岩铸体薄片和扫描电镜观察分析资料，研究了科尔康油田沙海组储集层的岩石学特征。科尔康油田沙海组储集层的岩石类型主要为岩屑砂岩和岩屑砂砾岩。碎屑岩的岩性特征对沙海组储集层的成岩作用具有显著的影响作用。