节理岩体断裂的分形机理研究

本文在考察了节理化岩体的断裂力学特征的基础上，结合现代分形几何原理，建立起追踪裂纹裂分形模型，对不连续岩体的断裂韧性的分形效应进行了深入研究，并通过压剪试验得到难。     

Identification of strength equilibrium rock slopes: Further statistical considerations

Strength equilibrium slopes are rock slopes whose gradient θ and rock mass strength (RMS) are in adjustment. The identification of such slopes depends on the accurate specification of the strength equilibrium envelope. Previous attempts to delimit the envelope are reviewed and modifications are proposed that permit its more rigorous statistical definition. Because θ can be measured much more reliably than RMS, the structural relation between these variables is estimated by regressing RMS on θ, and the strength equilibrium envelope is defined by the 95 per cent confidence limits. The analysis is performed on a data set of 268 rock slopes, representing all the data on RMS and θ hitherto employed in published studies of strength equilibrium slopes.     

Source mechanisms and microfracturing during uniaxial cycling of rock

Focal mechanisms for 116 acoustic emission events associated with uniaxial cyclic loading of Westerly granite have been investigated using P-wave first-motions. Polarities were observed at eight transducers positioned on the sample to provide good azimuthal coverage. The P-wave radiation patterns can be fit by a quadrupole source but not by a simple pure tensional source. The predominant orientations of the two nodal planes for the quadrupole fit were subparallel to and perpendicular to the ₁ direction. Events with close hypocenters, i.e., within a radius of 3 mm, display a remarkable similarity in focal mechanisms irrespective of the cycle or time within a cycle at which they occur. The polarity observations of 48 of 116 acoustic emission events could be fit with the simple quadrupole indicating that the microfracturing processes even in uniaxial compression often simplistically portrayed as propagating axial cracks are indeed quite complex.     

Centrifuge Modeling of Rock Slopes Susceptible to Block Toppling

Summary This paper presents the results of centrifuge tests that were aimed at validating the Goodman-Bray method for rock slope toppling analysis. The Goodman-Bray method was extended by the authors to accommodate non-persistent basal planes of rock columns. Two gypsum column models, with and without anchors were used to represent the failure modes. Measured critical centrifuge accelerations were in agreement with the results obtained from numerical modeling. A background of the toppling slope failures associated with a large hydropower project in China instigated the need for the centrifuge study. The centrifuge model tests used an artificial rock. The observed failure mode did not follow a straight failure plane as proposed by Goodman and Bray. The failures revealed a bi-planar slip surface with a deep-seated portion near the toe of the slope. The outcomes of the centrifuge tests illustrated the need to search for the critical failure surface when performing a toppling analysis. The search technique is similar to that usually performed in a conventional sliding analysis.     

Flow and transport predictions during multi-borehole tests in fractured chalk using discrete fracture network models

Multi-borehole pumping and tracer tests on the 10 to 100-m scale were conducted in a fractured chalk aquitard in the Negev Desert, Israel. Outcrop and core fracture surveys, as well as slug tests in packed-off intervals, were carried out at this site to obtain the parameters needed for construction of a stochastic discrete fracture network (DFN). Calibration of stochastic DFNs directly to the multiple borehole test data was inadequate. Instead, two equivalent deterministic DFN flow models were used: the vertical-fractures (VF) model, consisting of only vertical fractures, and the fractures’ intersections (INT) model, consisting of vertical and horizontal fractures with enhanced transmissivity at their intersections. Both models were calibrated against the multi-borehole response of one pumping test and their predictions were tested against three other independent pumping tests. The average accuracies of all transient drawdown predictions of the VF and INT models were 65 and 66%, respectively. In contrast to this equality in average drawdown predictions of both models, the INT model predicted better important breakthrough curve features (e.g., first and peak arrival times), than the VF model. This result is in line with previously assumed channeled flow, derived from analytical analysis of these pumping and tracer tests. Ronit Nativ, deceased, may her memory be blessed.     

A case study to verify methods for estimating transmissivity distributions along boreholes

Two methods, both using data from fixed-interval-length hydraulic tests and geological mapping on different scales, have been utilised to estimate transmissivity distributions of individual fractures. Individual fracture properties are of importance in estimating transport of water and solutes; they influence the spreading of grout when sealing tunnels. One of the methods is non-parametric, while the other is based on combinatorics and the multiplication principle. The study verified the usefulness of both methods for estimating the probability of conductive and non-conductive fractures, and the transmissivity distributions. Data for estimating transmissivity distributions originate from flow logging of a borehole in Sweden. Fracture frequency data are from core logging and images using a borehole image processing system (BIPS). Estimated transmissivity distributions, based on flow log data from 3-m sections (test scale length, L: 3 m, and step length, dL: 3 m), were compared with transmissivities obtained directly from detailed, overlapping flow logging which identify individual conductive fractures (test scale, L: 0.5 m, step length, dL: 0.1 m). The latter data are considered to be an acceptable approximation of the individual fracture transmissivities; the agreement, compared with the calculated transmissivity distributions based on 3-m section data, is good for both methods.

---

Resumen Se han utilizado dos métodos, ambos procesando datos de pruebas hidráulicas de longitud e intervalo fijo y mapas geológicos en distintas escalas, para estimar las distribuciones de transmisividad de fracturas individuales. Las propiedades de fracturas individuales son de importancia para estimar el transporte de agua y solutos; las propiedades influyen en la propagación de lechada al sellar túneles. Uno de los métodos es no paramétrico mientras que el otro se basa en el principio de multiplicación y combinatorio. El estudio verifica la utilidad de ambos métodos para estimar la probabilidad de fracturas conductivas y no conductivas y las distribuciones de transmisividad. Los datos para estimar las distribuciones de transmisividad se originan del registro de flujo de un pozo en Suecia. Los datos de frecuencia de fracturas provienen de registros de núcleo e imágenes usando un Sistema de Procesamiento de Imágenes de Pozo (BIPS). Se compararon las distribuciones estimadas de transmisividad basadas en datos del registro de flujo en secciones de 3 m (longitud de escala de la prueba L: 3 m, y escalón de longitud dL: 3 m), con transmisividades obtenidas directamente de registros detallados de flujo superpuesto el cual identifica fracturas conductivas individuales (escala de la prueba, L: 0.5 m, escalón de longitud, dL: 0.1 m). Los últimos datos se consideran una aproximación aceptable de las transmisividades de fracturas individuales; la consistencia, comparada con las distribuciones de transmisividad calculada basadas en datos de sección de 3 m, es buena para ambos métodos.

---

Résumé Deux méthodes ont été testées afin d’estimer la distribution des transmissivités de fractures unitaires; toutes deux utilisent des données issues de tests hydrauliques effectués à intervalles réguliers et de cartographies géologiques à plusieurs échelles. La connaissance des propriétés des fractures unitaires est importante pour estimer le transport d’eau et de solutés; elles influencent en outre l’étalement du coulis lors du scellement des tunnels. La première méthode est non-paramétrique, et la seconde repose sur l’analyse combinatoire et le principe de multiplication. Cette étude a vérifié l’utilité des deux méthodes pour estimer la probabilité d’occurrence de fractures conductrices et non-conductrices, et la distribution des transmissivités. Les distributions des transmissivités ont été estimées à partir de diagraphies effectuées sur un forage situé en Suède. Les densités de fracturation proviennent de carottages et d’imagerie BIPS (Borehole Image Processing System). Les distributions estimées des transmissivités, basées sur des diagraphies de flux effectuées sur des sections de 3 m (échelle du test L:3 m; pas dL:3 m), ont été comparées aux transmissivités obtenues sur des diagraphies de flux détaillées et se chevauchant, identifiant les fractures conductrices unitaires (échelle du test L: 0.5 m ; pas dL: 0.1 m). Il est admis que ces dernières données représentent une approximation satisfaisante des transmissivités des fractures unitaires; les deux méthodes sont en accord avec les distributions des transmissivités calculées à partir des données acquises sur des sections de 3 m.

     

永平水泄铜钴矿控矿因素

水泄铜钴矿区地质条件较为复杂,控矿因素较多,通过分析认为主要受断层及岩性控制,地层初始富集,构造及区域变质作用提供通道及热源。水的循环、溶解作用形成热卤水成矿。     

Hydraulic properties of the crystalline basement

Hydraulic tests in boreholes, up to 4.5 km deep, drilled into continental crystalline basement revealed hydraulic conductivity (K) values that range over nine log-units from 10⁻¹³−10⁻⁴ m s⁻¹. However, K values for fractured basement to about 1 km depth are typically restricted to the range from 10⁻⁸ to 10⁻⁶ m s⁻¹. New data from an extended injection test at the KTB research site (part of the Continental Deep Drilling Program in Germany) at 4 km depth provide K=5 10⁻⁸ m s⁻¹. The summarized K-data show a very strong dependence on lithology and on the local deformation history of a particular area. In highly fractured regions, granite tends to be more pervious than gneiss. The fracture porosity is generally saturated with Na–Cl or Ca–Na–Cl type waters with salinities ranging from <1 to >100 g L⁻¹. The basement permeability is well within the conditions for advective fluid and heat transport. Consequently, fluid pressure is hydrostatic and a Darcy flow mechanism is possible to a great depth. Topography-related hydraulic gradients in moderately conductive basement may result in characteristic advective flow rates of up to 100 L a⁻¹ m⁻² and lead to significant advective heat and solute transfer in the upper brittle crust. An erratum to this article can be found at     

X-ray imagery and physical core logging as a proxy of the content of sediment cores in cold-water coral mound provinces: a case study from Porcupine Seabight,SW of Ireland

Three provinces, characterized by the presence of carbonate mounds interpreted as cold-water coral banks have been reported in Porcupine Seabight, SW of Ireland and were recently subjected to many detailed studies. This contribution discusses the use of X-ray imagery and physical properties in deciphering palaeoceanographic, sedimentological and biological processes. Physical property core logging and X-ray imagery are used to identify and describe sedimentation regimes and so their respective palaeoceanographic and palaeoclimatological settings in two mound provinces, respectively the Belgica mound province and the Magellan mound province. Both provinces show at present time clear differences in the hydrodynamic environment. This study confirms that also during the past the oceanographic and sedimentological environment of both provinces differ clearly. Impacts of glacial–interglacial variations and locally derived ice rafting events (IRE), comparable with the North Atlantic Heinrich events (HE) have been recognized in both provinces. Moreover, the combination of X-ray imagery, magnetic susceptibility, gamma density and P-wave velocity makes it possible to estimate the coral content and coral distribution in unopened cores localized on top of carbonate mounds. A comparison between on-mound and off-mound cores in both provinces allowed revealing some mechanisms of mound evolution and coral growth versus time.