Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.     

Cretaceous deformation history of the middle Tan-Lu fault zone in Shandong Province, eastern China

Based on field analysis of fault-slip data from different rock units of the Cretaceous basins along the middle part of the Tan-Lu fault zone (Shandong Province, eastern China), we document polyphase tectonic stress fields and address the changes in sense of motion of the Tan-Lu fault zone during the Cretaceous. The Cretaceous deformation history of the Tan-Lu fault zone can be divided into four main stages. The first stage, during the earliest Cretaceous, was dominated by N-S extension responsible for the formation of the Jiaolai basin. We interpret this extension to be related to dextral strike-slip pull-apart opening guided by the Tan-Lu fault zone. The second stage, during the middle Early Cretaceous, was overwhelmingly rift-dominated and characterized by widespread silicic to intermediate volcanism, normal faulting and basin subsidence. It was at this stage that the Tan-Lu-parallel Yi-Shu Rift was initiated by E-W to WNW-ESE extension. The tectonic regime then changed during the late Early Cretaceous to NW-SE-oriented transpression, causing inversion of the Early Cretaceous rift basin and sinistral slip along the Tan-Lu fault zone. During the Late Cretaceous, dextral activation of the Tan-Lu fault zone resulted in pull-apart opening of the Zhucheng basin, which was subsequently deformed by NE-SW compression. This deformation chronology of the Tan-Lu fault zone and the associated Cretaceous basins allow us to constrain the regional kinematic models as related to subduction along the eastern margin of Asia, or related to collision in the Tibet region.     

Numerical models of tectonic deformation at the Baltica–Avalonia transition zone during the Paleocene phase of inversion

Predictions from dynamic modelling of the lithospheric deformation are presented for Northern Europe, where several basins underwent inversion during the Late Cretaceous and Early Cenozoic and contemporary uplift and erosion of sediments occurred. In order to analyse the evolution of the continental lithosphere, the equations for the deformation of a continuum are solved numerically under thin sheet assumption for the lithosphere. The most important stress sources are assumed to be the Late Cretaceous Alpine tectonics; localized rheological heterogeneities can also affect local deformation and stress patterns. Present-day observations available in the studied region and coming from seismic structural interpretations and stress measurements have been used to constrain the model. Our modelling results show that lateral variation in lithospheric strength below the basin systems in Central Europe strongly controls the regional deformation and the stress regime. Furthermore, we have demonstrated that the geometry of the boundary between Baltica and Avalonia, together with different rheological characteristics of the two plates, had a crucial role on local crustal deformation and faulting regime resulting in the Baltica–Avalonia transition zone from the S–N Alpine convergence.     

Copper-Polymetal Metallogenic Series and Prospecting Perspective of Eastern Section of Gangdise

Geological, geophysical, geochemical and remote sensing comprehensive studies show that big ore-prospecting potentiality is contained in the eastern section of the Gangdise Mountains, Tibet.There are various mineralization types with dominant types of porphyry and exhalation. According to their relations with tectonic evolution, they are divided into four kinds of metallogenic series as follows:magnmtic type (Cr, Pt, Cu, Ni) and exhalation type (Cu, Pb, Zn, Ag) ore deposit series related to Neo-Tethys oceanic crust subduction action (125-96 Ma); epithermai type (Au, Ag, Pb, Zn, Sb), altered fractured rock type (Cu, Mo) and skarn rock type (Cu) ore deposit series related to arc-continental collision; porphyry type (Cu, Mo), cryptoexplosion breccia type (Cu, Au, Pb, Zn), shear zone type (Au, Ag, Sb) and skarn rock type (Cu, Fe) ore deposit series with relation to post-orogenic extensional strike-slip. From subductive complex to the north, zoning appears to be crystallization differentiation type (segregation type)-shear zone type (altered rock type)-skarn rock type, epithermai type-porphyry type-porphyry type and exhalation type-exhalation type-hydrothermai filling-replacement type.The ore deposit is characterized by multi-places from the same source, parity and multi-stage, hypabyssal rock from the deep source and poly genetic compound as a whole.     

A millennial-scale record of Holocene tsunamis on the Kronotskiy Bay coast, Kamchatka, Russia

Deposits from as many as 50 large tsunamis during the last 7000 years are preserved on the Pacific coast of the Kamchatka Peninsula near the mouth of the Zhupanova River, southern Kronotskiy Bay. These deposits are dated and correlated using Holocene marker tephra layers. The combined, preserved record of tsunami deposits and of numerous marker tephras on Kamchatka offers an unprecedented opportunity to study tsunami frequency. For example, from the stratigraphy along southern Kronotskiy Bay, we estimate frequency of large tsunamis (>5 m runup). In the last 3000 years, the minimum frequency is about one large tsunami per 100 years, and the maximum about one large tsunami per 30 years; the latter frequency occurred from about 0 to 1000 A.D. This time interval corresponds to a period of increased seismicity and volcanic activity that appears to be recorded in many places on the Kamchatka Peninsula.     

浅述五大连池火山区浅层气体钍、氡与断裂构造和火山活动的关系

在五大连池火山区流体化学研究原有工作的基础上，对火山群的重要区段开展了野外踏勘、气体普查，特别是用放射性气体测量方法对火烧山、老黑山、笔架山、药泉山等火山区进行了Tn、Rn测量。通过大量实测资料，分析和研究了Tn、Rn等气体和火山、火山活动、断裂构造、断裂活动性及其他地质条件的关系，初步查明了五大连池火山区的气体组成特征、分布和形成规律，对地下主要气体的成因、气体和火山构造活动及其它地质条件的关系进行了初步探讨，并提出了对五大连池火山区气体观测的初步设想和建议。     

青藏及邻区新生代火山活动及构造演化

青藏高原是现今地球动力学和地质演化研究的一个热点。该区火山活动受中 -新生代以来高原深部地球物理 -化学反应的控制 ,是多种因素相互作用所表现的形式和结果。本区既有富钾质的 (主导 ) ,也有富钠质的火山岩 (次要 ) ;既有喷发熔岩流 (主导 ) ,也有一些浅源上侵的次火山岩体 ;火山活动发育在古近纪、新近纪与第四纪 ,而最强烈的发生在中新世期间。本区钠质和钾质两类火山岩在形成环境和时代上有很大的差异 :前者一般发育在古新世—始新世 (6 0～ 4 0MaBP) ,而后者主要形成在渐新世—中新世 (30～ 10MaBP) ;存在着钠质—钾质—酸性次火山岩的演化过程 ;大体上可划分为西羌塘、北羌塘、可可西里、中昆仑、西昆仑等 5个火山岩省。本文对比了青藏高原及邻区甘肃礼县和云南三岩区 (金沙江北段、腾冲和滇东南地区 )新生代火山岩的岩石组合、同位素年代学以及地球化学特征 ,大量的证据表明 ,这些火山岩形成在原始地幔、或“壳 -幔过渡带”或陆壳基底等源区。在实际考察和综合研究的基础上 ,探讨了岩石圈的区域构造特征及其与高原隆升的关系等     

长白山天池火山区长白-敦化剖面结晶基底的探测和研究

时间项分析法中，应用广义最小二乘法进行反演，对长白山天池火山区岩浆系统的长白—敦化(L1)剖面的Pg波到时进行了计算处理，得到了Pg波时间项及基底速度值；取上部地壳的介质平均速度为4．5km/s，经反演求得了各点的深度值，给出了长白山天池火山区结晶基底的厚度分布。结晶基底厚度一般在2．0km左右，而在长白山天池下方结晶基底最厚处接近4．0km；在万宝和敦化附近各有一不太明显的凹陷，其原因可能与在这两个位置处有几条断裂穿过有关。     

沂沭断裂带中部地区地震波速及地壳厚度的测定

选取1990～2001年发生在沂沭断裂带中部地区的23次ML2．3～4．0级地震为基础资料，对沂沭断裂带中段及附近地区地震波速进行了研究。结果表明，研究区-↑Vp=5．83km／s，-↑Vs=3．54km／s。同时，根据反射波走时方程，得出该地区反射波速度Vp11=6．21km／s，Vs11=3．65km／s和平均地壳厚度为37km。