Applied hydrodynamic wave-resistance computation by Fourier transform

An applied Fourier transform computation for the hydrodynamic wave-resistance coefficient is shown, oriented to potential flows with a free surface and infinity depth. The presence of a ship-like body is simulated by its equivalent pressure disturbance imposed on the un-perturbed free surface, where a linearized free surface condition is used. The wave-resistance coefficient is obtained from the wave-height downstream. Two examples with closed solutions are considered: a submerged dipole, as a test-case, and a parabolic pressure distribution of compact support. In the three dimensional case, a dispersion relation is included which is a key resource for an inexpensive computation of the wave pattern far downstream like fifteen ship-lengths.     

Performance of pile-restrained flexible floating breakwaters

The overall performance of pile-restrained flexible floating breakwaters is investigated under the action of linear monochromatic incident waves in the frequency domain. The aforementioned floating breakwaters undergo only vertical structural deflections along their length and are held in place by means of vertical piles. The total number of degrees of freedom equals the six conventional body modes, when the breakwater moves as a rigid body, plus the extra bending modes. These bending modes are introduced to represent the structural deflections of the floating breakwater and are described by the Bernoulli–Euler flexible beam equation. The number of bending modes introduced is determined through an appropriate iterative procedure. The hydrostatic coefficients corresponding to the bending modes are also derived. The numerical analysis of the flexible floating breakwaters is based on a three-dimensional hydrodynamic formulation of the floating body. A parametric study is carried out for a wide range of structural stiffness parameters and wave headings, to investigate their effect on the performance of flexible floating breakwaters. Moreover, this performance is compared with that of the corresponding pile-restrained rigid floating breakwater. Results indicated that the degree of structural stiffness and the wave heading strongly affect the performance of flexible floating breakwaters. The existence of an “optimum” value of structural stiffness is demonstrated for the entire wave frequency range.     

Fracture characteristics in Cretaceous platform and overlying ramp carbonates: An outcrop study from Maiella Mountain (central Italy)

This article focuses on field- and laboratory-based characterization of vertically persistent fractures that are part of oblique-slip normal fault zones and crosscut the Cretaceous platform and overlaying ramp carbonates outcropping at Maiella Mountain (central Italy). The achieved results show that: (i) fault damage zones are wider and more densely fractured in the platform carbonates than in the ramp ones; (ii) joints and sheared joints composing the fault damage zones are taller, better connected and less spaced within the former rocks than in the ramp carbonates. The aforementioned structural differences are interpreted to be a consequence of the different mechanical properties of the platform and ramp carbonates during failure. At Maiella Mountain, platform carbonates are, indeed, made up of overall stiffer (higher Uniaxial Compressive Strength values) and less porous rocks, due to more abundant intergranular void-filling cement and presence of matrix.In terms of hydrocarbon flow and recovery, geometric and dimensional attributes of fractures suggest that the well-connected network of closely spaced fractures cutting across the platform carbonates may form efficient pathways for both vertical and horizontal hydrocarbon flow. In contrast, the relatively poorly connected and low-density fracture network affecting the ramp carbonates is likely less efficient in providing fairways for flowing hydrocarbons.     

Petroleum accumulation and leakage in a deeply buried carbonate reservoir,Níspero field (Mexico)

The filling history of the Níspero deeply buried Lower Cretaceous carbonate reservoir (below 4000 m) from the south part of Gulf of Mexico was studied using a combination of data from petrography, stable isotopes and fluid inclusions and compared with a one-dimensional burial model to derive timing.     

New data on the present-day active fluid regime of fractured zones of crystalline basement and sedimentary cover in the eastern part of Volga-Ural region

The study area is the South Tatarstan Arch located in the Volgo-Ural Region, which is an enigmatic crustal segment occupying one third of the East European Platform. Monitoring studies have shown that fluid discharge processes are still active and time-dependent. This paper presents an integrated review of the geological, geophysical, hydrochemical and geochemical studies of the crystalline basement of Tatarstan. These studies are based on the stratigraphic and compositional schemes within the crystalline basement, the drilling of deep wells, the geodynamic activity of the fractured zones of the crystalline basement and the presence of fluids therein. Furthermore, the changes in the chemical composition of the basement waters are taken into account.     

库车坳陷克拉2气田异常流体压力演化史

根据克拉2气田现今实测地层压力分析了异常高压发育的特征,并通过流体包裹体测试求取包裹体形成时期的古压力。计算结果表明:下白垩统和古近系库姆格列木群砂岩储层在距今8～6Ma(康村组沉积期末)时,古压力系数大致为1.09～1.18,发育过剩压力为4.6～9.6MPa的异常高压。在此基础上,以古、今压力数据为约束条件,利用数值模拟技术定量恢复出下白垩统与侏罗系异常流体压力的演化历史。研究发现:下白垩统储层流体压力经历了沉积型异常流体压力形成发展(白垩纪-库车组沉积期末)和沉积型异常流体压力萎缩—构造挤压型异常流体压力孕育(库车组沉积期末至今)两个阶段。康村组沉积早期沉积型超压开始出现,库车组沉积期末达到顶峰,过剩压力达40～50MPa;此后,在沉积型超压萎缩—构造挤压型超压孕育过程的耦合下,过剩压力曾降至25～30MPa,更新世起超压略有升高。侏罗系流体压力演化较为简单,吉迪克组沉积期开始出现超压,至库车组沉积期末达到高峰,此后异常高压逐渐萎缩。在克拉2气田的主要成藏时期(距今3～1Ma),烃源岩较储层具有更高的异常压力,源—储压力差为10～30MPa。     

藏南沙拉岗锑矿流体包裹体红外显微测温研究

沙拉岗锑矿是藏南金锑成矿带内最具有代表性的锑矿床。为了更直接地了解该矿床的流体物理化学特征,本文利用红外显微镜对辉锑矿及紧密共生石英中的流体包裹体进行了显微测温研究。红外显微测温分析结果表明,辉锑矿中包裹体均一温度在134.9～221.9℃,峰值在160～190℃之间,盐度在1.7%～7.3%NaCleqv,峰值在5.0%～6.0%NaCleqv之间,密度在0.879～0.958g/cm3之间,平均值为0.934g/cm3;共生石英中包裹体均一温度在142.5～205.6℃,峰值在160～190℃之间,盐度在2.3%～7.0%NaCleqv,峰值在4.0%～6.0%NaCleqv之间,密度在0.910～0.947g/cm3之间,平均值为0.929g/cm3。通过对比研究认为沙拉岗辉锑矿及共生石英形成于同一物理化学条件,捕获同一成矿流体。结合石英中单个流体包裹体激光拉曼成分分析认为成矿流体为含微量CO2、N2、CH4气体的低温、低盐度和低密度的NaCl-H2O热液体系。成矿流体的沸腾作用是辉锑矿大量沉淀主要原因。     

鲁东南岚山头超高压变质岩流体包裹体特征与板片折返史

鲁东南岚山头含柯石英榴辉岩主要产于花岗质片麻岩内,是苏鲁超高压变质带主要榴辉岩体密集分布区之一。流体包裹体研究表明,榴辉岩矿物及细脉石英中捕获有四种类型包裹体:在超高压-高压榴辉岩相条件下捕获的 N_2±CO_2包裹体;在高压榴辉宕重结晶阶段被捕获的 CO_2-H_2O 包裹体和含子矿物高盐度 H_2O 溶液包裹体:在超高压岩石折返过程中的最晚(角闪岩相退变质甚至更晚)阶段捕获的低盐度 H_2O 溶液包裹体。利用榴辉岩矿物及脉体石英中捕获的流体包裹体相互期次关系,可以对本区超高压变质作用板片折返过程中的流体演化史进行重建。     

河南省洛宁县寨凹钼矿床流体包裹体研究及矿床成因

寨凹钼矿床位于华北克拉通南缘的熊耳地体．矿床定位受马超营断裂带的次级断裂控制,矿体呈脉状贼存于太华超群石板沟组黑云角闪斜长片麻岩中。成矿过程包括3个阶段：石英-辉钼矿阶段（I）、石英-多金属硫化物阶段（Ⅱ）、石英-碳酸盐阶段（Ⅲ）,其中,I阶段为主成矿阶段。寨凹钼矿床可见2类流体包裹体,即水溶液型和含子晶包裹体;激光拉曼指示包裹体成分主要为H2O。从早到晚,流体包裹体均一温度从I阶段100～260℃,经Ⅱ阶段110～160℃．变化为Ⅲ阶段120—180℃．矿床总体属于低温热液矿床：流体包裹体盐度从I阶段的2～25wt％NaCl．eqv演化至Ⅱ阶段的6—30wt％NaCl．eqv．然后降为Ⅲ阶段的7～25wt％NaCl．eqv。I阶段均一温度范围宽广、流体包裹体盐度由双峰式演化为单峰式以及包裹体温度-盐度双变图的负相关性指示了流体混合是主要的成矿机制。寨凹钼矿流体包裹体以高密度、高盐度的低温低压流体为特征,是含CaCl,流体参与成矿的结果,热的岩浆流体与冷的含CaCl,的卤水的混合．导致了辉钼矿的沉淀。寨凹钼矿床地质和流体包裹体特征与侵入岩相关的成矿系统一致．指示其成因类型为与侵入岩有关的钼矿床．     

有机质热演化过程中地层压力的作用与影响

压力对有机质演化的影响长期以来争论不断,共有3种不同意见：压力对有机质演化没有影响,压力促进有机质的演化,压力抑制有机质的演化。通过对前人所做实验的实验设备、实验样品及实验结果的分析对比发现：不同实验结果主要是由于不同实验条件引起的,特别是实验系统和加压方式的不同,对实验结果影响最大,所代表的地质意义也不同。综合分析结果表明,当压力的增加表现为沉积有机质受到的有效应力增加时可以促进有机质生烃;当压力的增加表现为孔隙流体压力增加时,有机质生烃过程将受到抑制;另外,这两种情况都可能使干酪根的镜质组反射率降低,易使人得出压力增加抑制有机质演化的结论。进一步对压力影响有机质演化的成因机制进行了分析,发现在有机质演化的不同阶段因异常压力的增压机制不同,压力在有机质演化过程中所表现出来的作用也有差异。