藏南沙拉岗锑矿流体包裹体红外显微测温研究

沙拉岗锑矿是藏南金锑成矿带内最具有代表性的锑矿床。为了更直接地了解该矿床的流体物理化学特征,本文利用红外显微镜对辉锑矿及紧密共生石英中的流体包裹体进行了显微测温研究。红外显微测温分析结果表明,辉锑矿中包裹体均一温度在134.9～221.9℃,峰值在160～190℃之间,盐度在1.7%～7.3%NaCleqv,峰值在5.0%～6.0%NaCleqv之间,密度在0.879～0.958g/cm3之间,平均值为0.934g/cm3;共生石英中包裹体均一温度在142.5～205.6℃,峰值在160～190℃之间,盐度在2.3%～7.0%NaCleqv,峰值在4.0%～6.0%NaCleqv之间,密度在0.910～0.947g/cm3之间,平均值为0.929g/cm3。通过对比研究认为沙拉岗辉锑矿及共生石英形成于同一物理化学条件,捕获同一成矿流体。结合石英中单个流体包裹体激光拉曼成分分析认为成矿流体为含微量CO2、N2、CH4气体的低温、低盐度和低密度的NaCl-H2O热液体系。成矿流体的沸腾作用是辉锑矿大量沉淀主要原因。     

江西香炉山矽卡岩型钨矿床流体包裹体研究

从江西西北部至安徽南部发育一条显著的斑岩-矽卡岩型钨成矿带,香炉山是其中一典型的矽卡岩钨矿床。矿床具有明显的矿化分带特征,由近接触带矽卡岩和云英岩矿体和远接触带脉状石英-硫化物-白钨矿和透镜状矿体组成。通过对不同蚀变带上矿石矿物和脉石矿物的流体包裹体显微测温分析表明:矽卡岩中的流体包裹体的均一温度范围在209～383℃,脉状石英-白钨矿和石英-硫化物-白钨矿中流体包裹体的均一温度范围分别为163～278℃和204～284℃,晚期方解石脉的温度最低为143～235℃;矽卡岩中的流体包裹体的盐度范围在0.35%～5.26%NaCleqv,脉状石英-白钨矿和石英-硫化物-白钨矿中流体包裹体的盐度范围分别为0.35%～5.86%NaCleqv和0.70%～9.21%NaCleqv,晚期方解石脉的盐度为0.35%～2.07%NaCleqv。激光拉曼探针测试表明,矽卡岩、石英-白钨矿脉和石英-硫化物-白钨矿脉中流体包裹体组分主要为H2O,还含有一定量CH4和少量的N2。从早期到晚期成矿阶段表现为一个降温的过程,指明了钨成矿温度较宽泛;钨在流体中可能以钨酸的形式运移,与围岩反应时,温度降低和碱性升高,促使白钨矿沉淀成矿。早期到晚期成矿流体温度和物质组成发生变化是成矿发生分带的重要原因。     

雅鲁藏布江蛇绿岩带西段达机翁地幔橄榄岩组成特征及其形成环境分析

雅鲁藏布江蛇绿岩带自萨嘎以西分成南北两个亚带。对两个亚带蛇绿岩的各自特征及成因联系的研究,是探讨雅鲁藏布江西段的新特提斯洋构造演化的关键。北亚带蛇绿岩呈构造岩块产于冈底斯山前喀喇昆仑断裂带的南侧。其中,位于北亚带西北段的达机翁蛇绿岩,主要由地幔橄榄岩,玄武岩夹硅质岩组成,各单元间断层接触。对达机翁蛇绿岩的地幔橄榄岩开展的组成特征研究表明:(1)地幔橄榄岩主体为方辉橄榄岩,含少量的纯橄岩。方辉橄榄岩内产有豆荚状铬铁矿(呈豆状,块状以及浸染状),铬铁矿有一层纯橄岩的外壳;(2)达机翁方辉橄榄岩单斜辉石含量低,组成矿物以及全岩的地球化学特征均指示了这些样品经历了相对高的部分熔融作用;(3)方辉橄榄岩具有U型的球粒陨石标准化的稀土元素分配模式,Nb相对亏损,Ta,Zr和Hf具有弱的正异常,同时Sr和U具有强烈的正异常,这些特征可能与残余地幔和俯冲带熔/流体之间相互作用导致的轻稀土元素和部分微量元素的选择性富集有关。定量计算表明,达机翁地幔岩中的方辉橄榄岩来源于一个尖晶石相地幔源区的部分熔融,部分熔融程度大于25%,高于深海地幔橄榄岩的部分熔融程度(10%~22%)。这些橄榄岩形成时的氧逸度条件位于FMQ和FMQ+1之间,高于深海地幔橄榄岩(FMQ-1),与俯冲带环境的氧逸度条件一致。因此,我们认为达机翁蛇绿岩中的地幔橄榄岩形成于大洋中脊的环境,随后发生了洋内俯冲作用,位于俯冲带上部的地幔橄榄岩经历了俯冲带流/熔体的交代作用。     

Mineralization of the Liwu large-scale stratiform copper deposits in Sichuan Province,China: Constraints from fluid inclusions

The Liwu stratiform copper deposit is located in the northwestern Jianglang dome, western China. Current studies mainly focus on the genetic type and mineralization of this deposit. Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features. Laser Raman analysis indicates that the ore-forming fluids is a H₂O-NaCl-CH₄ (-CO₂) system. Fluid inclusions microthermometry shows a homogenization temperature of 181–375°C and a salinity of 5.26%–16.99% for the disseminated-banded Cu-Zn mineralization; but a homogenization temperature of 142–343°C and a salinity of 5.41%–21.19% for the massive-veined Cu-Zn mineralization. These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids. H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water, plus minor formation water. And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks. Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction; whereas that of the massive-veined mineralization was mainly correlated with fluid boiling. The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones. This study is beneficial to understand the stratiform copper deposit.©2023 China Geology Editorial Office.     

Genesis of the Maoling gold deposit in the Liaodong Peninsula: Constraints from a combined fluid inclusion,C-H-O-S-Pb-He-Ar isotopic and geochronological studies

The large tonnage Maoling gold deposit (25 t @ 3.2 g/t) is located in the southwest Liaodong Peninsula, North China Craton. The deposit is hosted in the Paleoproterozoic metamorphic rocks. Four stages of mineralization were identified in the deposit: (stage I) quartz-arsenopyrite ± pyrite, (stage II) quartz-gold- arsenopyrite-pyrrhotite, (stage III) quartz-gold- polymetallic sulfide, and (stage IV) quartz-calcite-pyrrhotite. In this paper, we present fluid inclusion, C-H-O-S-Pb-He-Ar isotope data, zircon U-Pb, and gold-bearing sulfide (i.e. arsenopyrite and pyrrhotite) Rb-Sr age of the Maoling gold deposit to constrain its genesis and ore-forming mechanism. Three types of fluid inclusions were distinguished in quartz-bearing veins, including liquid-rich two-phase (WL type), gas-rich two-phase (GL type), and daughter mineral-bearing fluid inclusions (S type). Fluid inclusions data show that the homogenization at temperatures 197 to 372 °C for stage I, 126 to 319 °C for stage II, 119 to 189 °C for stage III, and 115 to 183 °C for stage IV, with corresponding salinities of 3.7 to 22.6 wt.%, 4.7 to 23.2 wt.%, 5.3 to 23.2 wt.%, and 1.7 to 14.9 wt.% NaCl equiv., respectively. Fluid boiling was the critical factor controlling the gold and associated sulfide precipitation at Maoling. Hydrogen and oxygen stable isotopic analyses for quartz yielded δ¹⁸O = ?5.0‰ to 9.8‰ and δ D = ?133.5‰ to ?77.0‰. Carbon stable isotopic analyses for calcite and ankerite yielded δ¹³C = ?2.3‰ to ?1.2‰ and O = 7.9‰ to 14.1‰. The C-H-O isotope data show that the ore-forming fluids were originated from magmatic water with meteoric water input during mineralization. Hydrothermal inclusions in arsenopyrite have ³He/⁴He ratios of 0.002 Ra to 0.054 Ra, and ⁴⁰Ar/³⁶Ar rations of 1225 to 3930, indicating that the ore-forming fluids were dominantly derived from crustal sources almost no mantle input. Sulfur isotopic values of Maoling fine-grained granite range from 6.‰1 to 9.8‰, with a mean of 7.7‰, δ³⁴S values of arsenopyrite from the mineralized phyllite (host rock) range from 8.9‰ to 10.6‰, with a mean of 10.0‰, by contrast, δ³⁴S values of sulfides from ore vary between 4.3‰ and 10.6‰, with a mean of 6.8‰, suggesting that sulfur was mainly originated from both the host rock and magma. Lead radioactive isotopic analyses for sulfides yielded ²⁰⁶Pb/²⁰⁴Pb = 15.830–17.103, ²⁰⁷Pb/²⁰⁴Pb = 13.397–15.548, ²⁰⁸Pb/²⁰⁴Pb = 35.478–36.683, and for Maoling fine-grained granite yielded ²⁰⁶Pb/²⁰⁴Pb = 18.757–19.053, ²⁰⁷Pb/²⁰⁴Pb = 15.596–15.612, and ²⁰⁸Pb/²⁰⁴Pb = 38.184–39.309, also suggesting that the ore-forming materials were mainly originated from the host rocks and magma. Zircon U-Pb dating demonstrates that the Maoling fine-grained granite was emplaced at 192.7 ± 1.8 Ma, and the host rock (mineralized phyllite) was emplaced at some time after 2065.0 ± 27.0 Ma. Arsenopyrite and pyrrhotite give Rb–Sr isochron age of 188.7 ± 4.5 Ma, indicating that both magmatism and mineralization occurred during the Early Jurassic. Geochronological and geochemical data, together with the regional geological history, indicate that Early Jurassic magmatism and mineralization of the Maoling gold deposit occurred during the subducting Paleo-Pacific Plate beneath Eurasia, and the Maoling gold deposit is of the intrusion-related gold deposit type.     

长岭凹陷深层天然气藏中CO_2及CH_4充注次序的流体包裹体证据

对长岭凹陷深层天然气藏储层——营城组火山岩中发育的流体包裹体进行了详细研究,结果表明在火山岩发育的石英、方解石细网脉中均存在较多的碳质流体包裹体,单个包裹体激光拉曼光谱分析结果表明其主要为CO2及CH4两种类型的碳质包裹体。其中方解石细网脉体中发育有原生及次生CH4包裹体,而含CO2包裹体多以原生包裹体产于石英细网脉中。很多含CO2包裹体的石英细脉中发现了含CH4包裹体的方解石脉体的角砾,这就表明石英细脉形成晚于方解石细脉。营城组火山岩储层中CO2及CH4包裹体的产状特征研究表明,松辽盆地深层天然气藏的形成系火山岩成岩后CO2及CH4等气体不同期次充注的结果,CH4气的充注时间早于CO2气,火山岩中发育的原生孔隙及次生裂隙为上述气体的充注和聚集提供了重要通道。     

金属矿床的成矿流体成分和流体包裹体

自然界中的成矿流体按其主要成分,可分为:(1)岩浆,即形成岩浆矿床的岩浆;(2)以H2O为主的流体(含Na Cl);(3)以CO2为主的流体。地壳中的流体类型很多,只有含一定金属元素含量的,并且达到一定浓度时才称为金属矿床的成矿流体。基于对矿床中流体包裹体和天然成矿流体中金属种类和含量的测定,这些金属矿床的成矿流体按金属元素含量可以分为五组,成矿流体可以来自岩浆、岩浆热液、大气降水、盆地卤水和变质流体等地质环境。     

新疆东天山突出山铜铁矿床地球化学特征与地质意义

突出山铜铁矿床是东天山雅满苏石炭纪弧前-岛弧带中代表性的铁多金属矿床, 矿体呈透镜状、脉状、似层状赋存于上石炭统底坎尔组下亚组火山岩中。矽卡岩阶段包裹体均一温度为151℃~>380℃, 盐度为1.91%~23.18% NaCl_eq, 密度为0.76~1.09 g/cm³, 热液硫化物阶段包裹体均一温度为101℃~280℃, 盐度为0.35%~23.05% NaCl_eq, 密度为0.74~1.13 g/cm³, 表明成矿流体属于中-高温、中-低盐度、中-低密度的NaCl-H₂O体系。(绿泥石)绿帘石矽卡岩、磁铁矿(镜铁矿)矿石、含磁铁矿灰岩的稀土配分模式均为轻稀土相对富集的右倾型(LREE/HREE=2.85~9.21), 以出现负铕异常(δEu=0.22~1.09)和铈异常不发育为特征, 与底坎尔组火山岩相似, 表明成矿物质来源于底坎尔组火山岩。矿区矽卡岩可能是火山热液交代碳酸盐岩形成的, 成矿条件为中-高温、较为宽广的氧化还原环境, 矿床成因属火山热液交代型。     

新疆阿尔泰巴特巴克布拉克铁矿床成矿作用研究

巴特巴克布拉克铁矿床赋存于上志留-下泥盆统康布铁堡组变质火山-沉积岩系中, 近矿围岩为石榴子石矽卡岩、角闪斜长变粒岩和浅粒岩。矿体总体顺层分布, 呈似层状、透镜状及不规则状, 空间上与矽卡岩密切相关。流体包裹体研究表明, 矽卡岩阶段形成的石榴子石中发育纯气体包裹体、气体包裹体、液体包裹体、含子矿物包裹体及熔融包裹体; 退化蚀变阶段发育液体包裹体和少量气体包裹体; 石英-硫化物阶段主要发育液体包裹体、含液体CO₂的三相包裹体及少量纯气体包裹体、气体包裹体和含子矿物包裹体。矽卡岩阶段均一温度变化为217 ℃~499 ℃, 在255 ℃出现峰值, 盐度(NaCl_eq)变化为8.68%~22.65%; 退化蚀变阶段均一温度变化为181 ℃~432 ℃, 在225 ℃出现峰值, 盐度变化为12.85%~22.65%; 石英-硫化物阶段均一温度变化为140 ℃~482 ℃, 在155 ℃出现峰值, 盐度变化为0.18%~42.40%。石榴子石、石英和方解石的 δ¹⁸ O_SMOW 变化为1.8‰~7.1‰, δ¹⁸Ο_Η2Ο为 -4.79‰~4.57‰, δD_SMOW 为 -128‰~-84‰, 表明矽卡岩阶段成矿流体主要为岩浆水, 混合少量大气降水; 石英-硫化物阶段大气降水所占比例明显增加。方解石δ¹³ C_V-PDB 变化为 -3.2‰~-2.0‰, 表明流体中的碳来自深部或地幔。     

共生黑钨矿与石英等多种矿物中流体包裹体的红外显微测温对比研究——以江西西华山石英脉钨矿床为例

西华山钨矿床是一个产于燕山期花岗岩中的大脉型钨矿床。已有百余年的开采史。但在矿床成矿条件和成矿流体性质等方面一直存在不同认识。作者利用红外显微镜及其它相关设备,对西华山矿床不同中段样品中的黑钨矿、锡石、绿柱石、黄铁矿、闪锌矿、石英和萤石中的流体包裹体进行了详细对比研究。结果显示,蚀变花岗岩中造岩石英只见次生气液包裹体,晶洞水晶中只有原生包裹体,而云英岩石英中原生、次生包裹体均较发育。黑钨矿中以原生气液包裹体为主,在早期结晶的黑钨矿中还有较多的硅酸盐熔融包裹体,而晶洞中的黑钨矿和水晶一样——只有原生气液包裹体。绿柱石中除了硅酸盐包裹体外,主要是气液包裹体(多为次生)。其它锡石、黄铁矿、闪锌矿和萤石等都只有气液包裹体(原生或次生)。研究结果表明,西华山钨矿床的初始成矿流体是一种岩浆——热液过渡性流体,尔后才演变成单一的热水溶液,在这一过程中黑钨矿、黄铁矿、闪锌矿、萤石和石英等矿物不断晶出。矿床总的成矿温度大致为700~200℃,压力约为160~200MPa。各种气液包裹体的盐度主要为5.0%~10%Na Cleqv。文中还对这些数据的地质意义以及对脉钨矿床流体包裹体研究和数据解释中的某些问题进行了较深入的讨论。