持续大流量过程对黄河内蒙古河段河道塑形能力的分析与思考

2018年伏秋汛期黄河流域上游持续来水,为保证2108-2019年度黄河流域凌汛期安全,黄河流域重点水库进行了大流量持续下泄。以2018年9月的实际数据为基准,通过对重点水库实际日均出入库调度情况,内蒙古河段的重点水文站实际日均流量过程和三个年份汛期大断面套绘成果对比分析研究,可以得出水库大流量持续下泄对内蒙古河段河道塑形能力起到了关键性作用,有效的提高了主槽过流能力,河段最小平滩流量得到一定的恢复,对下一步研究黄河流域河道过流能力提供了有利的数据支撑和参考价值。     

一种基于Hough变换的对极几何稳健估计算法

从基本矩阵的性质和作用出发,首先从理论上证明了如果在一条2维直线上有多于给定的3个以上的匹配点,多余的点将被视为冗余点不能用作匹配点;然后针对该问题引入了Hough变换算法,在建立匹配点对应关系的同时剔除冗余的共线点。实验表明,用改进后的算法估计出的基本矩阵在平均余差和对极距离上都小于改进前的算法,提高了基本矩阵的估计精度和稳定性。     

激光测高数据辅助卫星成像几何模型精化处理

资源三号02星搭载了中国首个对地观测试验性激光测高载荷。借鉴目前较成熟的卫星影像区域网平差理论的基础上,结合近年来激光测高数据精度的大幅提升以及资源三号02星激光测高数据的特点,首次提出了激光测高数据辅助卫星立体影像进行成像几何模型精化处理的通用理论。首先,利用传统的区域网平差算法对所处理影像进行高精度连接点匹配处理,并对其进行无约束的自由网平差处理,获得高精度相对精度及不亚于原始成像几何模型的绝对精度;其次,根据激光测高数据3维坐标和精化后参考影像成像几何模型获取激光数据参考影像坐标;而后将参考影像坐标通过几何模型映射获取目标影像上待匹配影像坐标,通过连接点匹配算法,对待匹配目标影像坐标进行精化获取高精度像方同名点;最后,以同名点作为高程控制进行区域网平差计算,对影像成像几何模型进一步处理,获取高精度补偿参数。通过湖北、青海两测区的试验,以激光测高数据辅助卫星影像几何模型精化精度可分别达到1.97 m、3.23 m,结果表明本文提出的方法可有效提高卫星立体数据测图精度。     

伪三维地震勘探法在煤田勘查中的应用

勘探区属郭庄煤矿的后备井田，勘探的目的是掌握井田主可采煤层的赋存形态与断层、陷落柱发育特征。根据勘探区的地质条件，地质任务，兼顾质量和成本，勘探设计方案最终确定为3线1炮制线束状观测系统，采用中间放炮，使勘探物理点由常规二维设计的3000个减至700个，勘探成本明显降低。勘探前后的资料对比分析表明，3#煤层的展布特征和断层构造有较大不同，其中3#煤层展布形态由NE向变化均匀，两翼对称的背斜构造修改为等高线变化扭曲相对剧烈，两翼对称的向斜构造；勘探后新解释断层5条，断点3处，另外3条已知断层的形态、位置、落差等相差各异。     

428XL系统死机故障分析与排解方法

在大港探区新港Ⅰ期三维地震勘探中,428XL系统频繁出现了死机现象,如开机后仪器无故停止执行各项操作、放炮时系统操作窗口跳出软件错误信息、窗口之间可相互切换但软件却无法执行操作命令、采集数据流程被中断等。根据现场采取的降低系统软件版本等应急措施所呈现的效果及对428XL死机现象分析,认定这类故障是由于软件的兼容性存在问题所致。据此提出了使用超级排列、现场降级系统软件版本及强行中断server运行等方法,以解决428XL系统死机故障。     

质量传输和同位素交换:流动几何学和交换机制

耦合的质量传输和动力学限制的同位素交换模型综合考虑了平流、扩散、热液弥散 ,以及岩石与水之间的不平衡同位素交换等项因素。把耦合模型应用于 2个构造环境下的古热液系统 ,进而解释稳定同位素数据。对于造成环绕浅成侵入岩体分布的18O亏损环带的流体的流动几何学 ,以及浅部正断层流体流动的几何学 ,耦合模型提供了不同于单一同位素交换模型的解释。耦合模型也提供了关于同位素相对交换速率和同位素交换机制的信息。结果表明 ,断层带的动态重结晶促进了表面反应 ,进而便利了同位素交换 ;在化学不反应性和未变形的矿物中 ,同位素交换可能受制于固态条件下的扩散。     

3DCM的几何与纹理数据一体化管理方法研究

建设三维城市模型(3DCM)首先需要建立场景所需的海量地形地物空间数据库,从而有效组织三维实体数据来满足大范围高精度场景实时绘制的要求.该文提出一种以三维空间实体为单位的基于关系数据库(RDBMS)的3DCM的几何与纹理数据一体化管理方法.采用Direct3D 9.O三维开发平台、C#编程语言实现了3DCM空间数据库模型管理系统.实验证明:该系统在效率、安全、网络多用户访问方面都优于传统基于文件的管理模式,满足了大范围3DCM海量模型数据管理与应用需求.     

台湾岛对气流扰动的影响

本文根据一个三维气流过山的模型,用数值快速傅里叶变换方法,讨论理想东北季风气流经过台湾岛产生的扰动气压场、扰动垂直速度场和水平流场.经与实际东北季风下台湾岛的气候特征进行比较,结果令人满意.     

A review of paired catchment studies for determining changes in water yield resulting from alterations in vegetation

Paired catchment studies have been widely used as a means of determining the magnitude of water yield changes resulting from changes in vegetation. This review focuses on the use of paired catchment studies for determining the changes in water yield at various time scales resulting from permanent changes in vegetation. The review considers long term annual changes, adjustment time scales, the seasonal pattern of flows and changes in both annual and seasonal flow duration curves. The paired catchment studies reported in the literature have been divided into four broad categories: afforestation experiments, deforestation experiments, regrowth experiments and forest conversion experiments. Comparisons between paired catchment results and a mean annual water balance model are presented and show good agreement between the two methodologies. The results highlight the potential underestimation of water yield changes if regrowth experiments are used to predict the likely impact of permanent alterations to a catchment's vegetation. An analysis of annual water yield changes from afforestation, deforestation and regrowth experiments demonstrates that the time taken to reach a new equilibrium under permanent land use change varies considerably. Deforestation experiments reach a new equilibrium more quickly than afforestation experiments. The review of papers reporting seasonal changes in water yield highlights the proportionally larger impact on low flows. Flow duration curve comparison provides a potential means of gaining a greater understanding of the impact of vegetation on the distribution of daily flows.     

Reconstructing fluvial bar surfaces from compound cross‐strata and the interpretation of bar accretion direction in large river deposits

The interpretation of fluvial styles from the rock record is based for a significant part on the identification of different types of fluvial bars, characterized by the geometric relationship between structures indicative of palaeocurrent and surfaces interpreted as indicative of bar form and bar accretion direction. These surfaces of bar accretion are the boundaries of flood‐related bar increment elements, which are typically less abundant in outcrops than what would be desirable, particularly in large river deposits in which each flood mobilizes large volumes of sediment, causing flood‐increment boundary surfaces to be widely spaced. Cross‐strata set boundaries, on the other hand, are abundant and indirectly reflect the process of unit bar accretion, inclined due to the combined effect of the unit bar surface inclination and the individual bedform climbing angle, in turn controlled by changes in flow structure caused by local bar‐scale morphology. This work presents a new method to deduce the geometry of unit bar surfaces from measured pairs of cross‐strata and cross‐strata set boundaries. The method can be used in the absence of abundant flood‐increment bounding surfaces; the study of real cases shows that, for both downstream and laterally accreting bars, the reconstructed planes are very similar to measured bar increment surfaces.