线要素几何信息量度量方法

目的 提出了基于弯曲的线要素几何信息量的度量方法。首先利用拐点识别线要素弯曲,将线要素几何结构分解为一组有序弯曲。进而基于地图信息产生的差异性和多样性特征本质,从元素层次的弯曲形态、邻域层次的弯曲拓扑和整体层次的弯曲分布来描述弯曲序列的空间特征,并提出相应的几何信息分类,即弯曲几何形状信息、弯曲几何拓扑信息和弯曲几何分布信息。然后针对不同类型的几何信息,分别建立各层次空间特征描述指标,在此基础上提出相应的信息量度量方法。实验验证了本文方法的可行性和合理性。     

局部大地水准面精化系统软件的设计与实现

给出了局部大地水准面精化系统的总体结构以及各分系统的详细设计与实现方法,开发了旨在对相关重力测量数据实现自动化处理的局部大地水准面精化系统工具软件,并应用于某区域实际大地水准面的精确计算。实践证明,该系统能有效提高相关数据的处理效率,有助于局部大地水准面精化过程的规范化。     

基于几何变换的图形采集与编辑算法研究

分析了解析几何法的符号绘制算法,采用了几何变换实现图形绘制的算法,实现了椭圆弧的采集、编辑及Bezier曲线和椭圆弧外接矩形的算法。     

Regional hydrologic mapping of flows in stream networks

River low flow (LF) is an important hydrological characteristic used in management of the quantity and quality of water resources. A common way to transpose at-station low flow quantiles to ungaged locations involves development of regional multivariate regression models. In site selection studies of water control facilities, need arises to automate the mapping of LF characteristics onto the stream network in a continuous manner. This would allow estimation of LF at any desired ungaged location. A mapping algorithm is introduced that determines the value of regression model's independent variables (input components) over the drainage area of each stream pixel and calculates the flow (output). The mapping algorithm relies mainly on the digital elevation model (DEM) and its derivatives, such as flow direction and flow accumulation. Furthermore, the contribution of each independent variable of the regional model to the total flow may be plotted to represent the flow profiles along the streams. A case study involving LF mapping in rivers of Gilan province, Iran, where LF quantiles are required for issuing water withdrawal permits as well as maintaining water quality standards, is also described in the paper. Overall, the maps and profiles of flow statistics in the region of interest provide convenient visualization and assessment tools for water resource and environmental engineers. The transposition algorithm may also be applied in regional mapping of other flow characteristics such as flood or average flows.     

几何地理要素的相似性度量方法研究

几何地理数据相似性是地理数据匹配处理的基础,决定着地理数据匹配结果的成功率和准确率。本文分别从点、线、面3个角度对几何地理数据的相似性进行深入分析,通过对点、线、面三种地理要素特点的深入研究,给出了几何地理数据的相似性算法和度量模型。通过实验,初步验证了所提算法的可行性,为地理数据的相似性匹配研究奠定了基础。     

客运专线轨检小车测量控制系统研究与开发

针对国内某轨检小车研发项目,采用模块化的程序设计集成开发环境Microsoft Visual Studio.NET,开发出了一套功能完善的高速铁路轨道检测控制系统。该系统以高速铁路精密定轨测量原理方法为基础,采用模块化的程序设计思路,实现了轨道检测数据的自动采集、自动记录、自动数据分析和平差处理、成果显示和自动检核等功能。工程应用实践表明,该检测系统运行稳定可靠,检测精度高,具有一定的实用性和推广价值。     

利用GRIC测度的匹配数据拟合模型检测算法

影像间的匹配点通常受基本矩阵或单应矩阵模型约束,利用不同的描述模型引导匹配会得到不同的匹配结果,并且将直接影响后续的三维重建结果。引入GRIC测度来检测匹配数据的拟合模型,推导了GRIC测度拟合单应矩阵模型和基本矩阵模型的误差方程。模拟数据和真实影像数据实验表明,GRIC测度比利用误差大小来检测拟合模型更加可靠,可以更有效地剔除误匹配点。     

多源遥感影像误匹配点剔除的粗糙模糊C-均值方法

简要概述了遥感影像匹配中,误匹配点剔除的常用方法.对SIFT特征描述子生成及其匹配、粗糙模糊C-均值方法聚类分析的原理方法进行了详细论述.针对SIFT方法匹配出的大量点对,将不同时相,不同传感器、不同分辨率影像广义划分为同分辨率和不同分辨率.基于同分辨率影像匹配点对问连线具有相同的距离及斜率、不同分辨率影像匹配点对间连线的延长线交于一点的几何约束条件,利用粗糙模糊C-均值模型聚类分析方法对点对快速剔除误匹配点后,对剔除的结果利用最小二乘方法进行精匹配,结果达到亚像素.最后,通过对不同时相、不同分辨率、不同传感器的多源遥感影像实验分析验证了该方法的适用性、可靠性及精确性.     

From 2D TO 3D Through Modelling Based On A Single Image

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.     

地形模型的多分辨率简化与压缩

在地形的三维表达中 ,海量的三维数据在显示、存储、传输等方面存在着很多困难。为了解决这些困难 ,本文提出了一种基于渐进简化的多分辨率几何简化与压缩方法。通过该种方法 ,复杂的地形模型能够很好的被简化成适于LOD连续表达的方式 ,并且在简化基础上的数据压缩可使地形模型的存储量减少、绘制速度增加、网络传输效率提高 ,其结果能够胜任地形模型在网络上的渐进传输