几种花青染料的合成及分离

研究了Ｎ甲基对二甲胺基苯乙烯吡啶碘盐系列化合物的合成、分离方法,通过可见吸收、ＭＳ谱、ＨＮＭＲ 谱及氮素测定分析产物,证实了其结构和理论预期的一致性     

漓江流域水环境综合治理对策

文章概述了漓江流域水环境现状,分析了存在的主要问题,阐明了流域水灾频繁、水环境污染的成因,指出了流域森林结构欠合理,调蓄能力不足,导致了流域洪涝、干旱频繁,枯水期长,水资源短缺;流域生活与生产排污,造成枯水期水污染。因而需进行深入的科学研究、绿化、兴修水利工程、实施节水技术、严格管理、科学调配水资源等综合举措,实现流域的可持续发展。     

高温熔融研制岩石标准玻璃方法初步研究:以玄武岩为例

探索了利用高温炉合成玄武岩玻璃制作原位微区主微量元素含量分析的标准物质的实验条件.选取玄武岩标准物质GBW07105(GSR-3)进行高温熔融、淬火实验研究,获得玄武岩玻璃,为合成其他地质样品微区分析标准参考物质的研制提供了参考方法.用激光剥蚀-四极杆等离子体质谱(LA-Q-ICPMS)对样品微区46个主元素和微量元素...     

焦磷酸根在即时合成阴离子粘土结构中的嵌入作用

污染物在矿物结构中的嵌入是固化、净化污染物的一种有前景的矿物学方法。焦磷酸根离子是工业废水中较难处理的工业磷污染源之一,研究新的除磷技术是水污染控制技术领域的重要课题之一。通过人工配制焦磷酸盐废水,初步研究镁一铝盐水解共沉淀法即时合成阴离子粘土去除焦磷酸根的效果、影响因素和焦磷酸根离子在阴离子粘土结构中的嵌入作用。研究结果表明,通过镁一铝盐水解共沉淀法即时合成阴离子粘土,焦磷酸根离子有效地嵌入阴离子粘土结构中,对焦磷酸根有非常好的去除效果。影响处理效果的主要因素是pH值和Mg／Al比值。pH值为9．0～10,Mg／Al比1：1～3：1时,都可以获得较好的去除效果。     

Fischer图解及其在旋回层序研究中的应用──以北京西山张夏组为例

Ｆｉｓｃｈｅｒ图解（又称为容纳空间图解）为人们研究沉积旋回在空间上的叠置规律、相对海平面变化、层序级次的划分以及地层层序对比等提供了一种客观实用的方法。本文较详细地讨论了该图解的绘制方法及应注意的问题。运用该图解，将北京西山下苇甸剖面张夏组划分为１个大的三级旋回层序和４个四级旋回层序，根据图解反映的相对海平面变化讨论了旋回层序与构造运动间的关系，提出华北板块晚寒武世之前的＂翘翘板运动＂应始于中寒武世张夏期之早期到中期。     

合成磷灰石的去氟机理研究

用固相反应法和sol-gel法合成了不同类型的磷灰石（AP），并采用TEM、XRD、IR、BET比表面积法及静、动态吸附等方法研究了不同AP的比表面积、结晶度、晶胞参数、结晶尺寸、晶格缺陷度、Ca/P摩尔比和煅烧温度等与吸氟能力的关系，结果表明：结晶度高、晶粒大的AP有较小的吸氟量，属表面单分子层化学络合吸附机理；酸活化的AP有较大的吸氟量，属溶解-沉淀与沉淀物表面纳米尺寸效应吸附的复合去氟机理；具纳米尺寸的HAP在常温、常压、无二次污染、小于11mg/L的低含氟浓度废水中且不酸化情况下有较大吸氟量，属纳米尺寸效应吸附机理。     

水热条件对纤蛇纹石纳米管合成的影响研究

采用水热法在不同反应条件下合成了一系列纤蛇纹石纳米管.利用红外吸收光谱、扫描电镜和透射电镜系统地研究了水热反应中,反应温度、Si/Mg比、反应时间等不同反应参数对合成纤蛇纹石纳米管的晶体生长及其结构的影响.结果表明,温度的升高、Si/Mg比趋近0.68及反应时间的延长均有利于纤蛇纹石的生长,并获得最佳条件下合成的纤蛇纹石条件.     

水热条件下利用微波加热从粉煤灰合成沸石研究

着重选用NaOH水溶液为反应前驱物, 通过改变反应温度、NaOH浓度与合成时间等参数, 在水热条件下利用微波加热直接对粉煤灰进行晶化, 合成得到了浊沸石、菱沸石、NaP1沸石3种沸石.粉煤灰转化为沸石率约15%~40%.研究表明: (1) 反应体系在15min左右即有合成沸石产生, 30min左右合成沸石转化率达到最佳; (2) 为保证沸石晶核生成和晶体的生长, 反应体系的溶液/粉煤灰比不应低于2.5; (3) 在溶液/粉煤灰比为2.5时, 应控制加热时间在30min左右.      

Geological and C–O–S–Pb–Sr isotopic constraints on the origin of the Qingshan carbonate-hosted Pb–Zn deposit,Southwest China

Located in the western Yangtze Block, the Qingshan Pb–Zn deposit, part of the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic province, contains 0.3 million tonnes of 9.86 wt.% Pb and 22.27 wt.% Zn. Ore bodies are hosted in Carboniferous and Permian carbonate rocks, structurally controlled by the Weining–Shuicheng anticline and its intraformational faults. Ores composed of sphalerite, galena, pyrite, dolomite, and calcite occur as massive, brecciated, veinlets, and disseminations in dolomitic limestones.

The C–O isotope compositions of hydrothermal calcite and S–Pb–Sr isotope compositions of Qingshan sulphide minerals were analysed in order to trace the sources of reduced sulphur and metals for the Pb–Zn deposit. δ¹³C_PDB and δ¹⁸O_SMOW values of calcite range from –5.0‰ to –3.4‰ and +18.9‰ to +19.6‰, respectively, and fall in the field between mantle and marine carbonate rocks. They display a negative correlation, suggesting that CO₂ in the hydrothermal fluid had a mixed origin of mantle, marine carbonate rocks, and sedimentary organic matter. δ³⁴S values of sulphide minerals range from +10.7‰ to +19.6‰, similar to Devonian-to-Permian seawater sulphate (+20‰ to +35‰) and evaporite rocks (+23‰ to +28‰) in Carboniferous-to-Permian strata, suggesting that the reduced sulphur in hydrothermal fluids was derived from host-strata evaporites. Ores and sulphide minerals have homogeneous and low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.561 to 18.768, ²⁰⁷Pb/²⁰⁴Pb = 15.701 to 15.920, and ²⁰⁸Pb/²⁰⁴Pb = 38.831 to 39.641) that plot in the upper crust Pb evolution curve, and are similar to those of Devonian-to-Permian carbonate rocks. Pb isotope compositions suggest derivation of Pb metal from the host rocks. ⁸⁷Sr/⁸⁶Sr ratios of sphalerite range from 0.7107 to 0.7136 and (⁸⁷Sr/⁸⁶Sr)_200Ma ratios range from 0.7099 to 0.7126, higher than Sinian-to-Permian sedimentary rocks and Permian Emeishan flood basalts, but lower than Proterozoic basement rocks. This indicates that the ore strontium has a mixture source of the older basement rocks and the younger cover sequence. C–O–S–Pb–Sr isotope compositions of the Qingshan Pb–Zn deposit indicate a mixed origin of the ore-forming fluids and metals.     

Geology,ore facies and sulphur isotopes of the Koushk vent-proximal sedimentary-exhalative deposit,Posht-e-Badam Block,Central Iran

The Koushk zinc–lead deposit in the central part of the Zarigan–Chahmir basin, central Iran, is the largest of several sedimentary–exhalative (SEDEX) deposits in this basin, including the Chahmir, Zarigan, and Darreh-Dehu deposits. The host-rock sequence consists of carbonaceous, fine-grained black siltstone with interlayered rhyolitic tuffs. It corresponds to the upper part of the Lower Cambrian volcano-sedimentary sequence that was deposited on the Posht-e-Badam Block due to back-arc rifting of the continental margin of the Central Iranian Microcontinent. This block includes the late Neoproterozoic metamorphic basement of the Iran plate, overlain by rocks dating from the Early Cambrian to the Mesozoic. Based on ore body structure, mineralogy, and ore fabric, we recognize four different ore facies in the Koushk deposit: (1) a stockwork/feeder zone, consisting of a discordant mineralization of sulphides forming a stockwork of sulphide-bearing dolomite (quartz) veins cutting the footwall sedimentary rocks; (2) a massive ore/vent complex, consisting of massive replacement pyrite, galena, and sphalerite with minor arsenopyrite and chalcopyrite; (3) bedded ore, with laminated to disseminated pyrite, sphalerite, and galena; and (4) a distal facies, with minor disseminated and laminated pyrite, banded cherts, and disseminated barite. Carbonatization and sericitization are the main wall-rock alterations; alteration intensity increases towards the feeder zone. The δ³⁴S composition of pyrite, sphalerite, and galena ranges from?+6.5 to?+36.7‰. The highest δ³⁴S values correspond to bedded ore (+23.8 to?+36.7‰) and the lowest to massive ore (+6.5 to?+?17.8‰). The overall range of δ³⁴S is remarkably higher than typical magmatic values, suggesting that sulphides formed from the reduction of seawater sulphate by bacteriogenic sulphate reduction in a closed or semi-closed system in the bedded ore, whereas thermochemical sulphate reduction likely played an important role in the feeder zone. Sulphur isotopes, along with sedimentological, textural, mineralogical, and geochemical evidences, suggest that this deposit should be classified as a vent-proximal SEDEX ore deposit.