弹性波的三维有限元模拟

本文讨论了弹性波瞬态传播问题的三维有限元计算方法及当前存在的实际困难.针对要求计算机内存大和计算时间长的问题,采取了改进措施.由于采用了集中质量矩阵和修正的中心差分时间积分显格式相结合的方法,可以使计算机内存和计算时间大为减少;由于采用结点定位法,最适合用于目前发展的并行计算机系统,可使计算速度大大增快;还采用了有效激发震源法,有效激发区是随时间步进的增加而逐步增大,这不仅能节省计算时间,而且使波场的传播过程一目了然,本文计算了由两种介质组成的三维楔形问题,得到若干典型剖面的瞬时波场图及随时间变化的合成地震图.     

预测陕西关中地区需水量的改进GM(1,1)模型

需水量评价与预测是水资源规划与管理一项重要的研究内容。本文采用定额法计算需水量。通过对陕西关中地区需水量要素组成的分析,认为需水量要素属平稳时间序列,且一阶累加生成数据系列满足指数规律,符合灰色预测条件。为了提高GM(1,1)模型的精度,采用一种改变背景值的新方法,即:中心逼近方法。通过精度检验,中心逼近式GM(1,1)模型平均误差百分比、误差平方和分别比传统的GM(1,1)模型提高了0.147和1.579。用中心逼近式GM(1,1)模型预测需水量各要素近期和中长期值,经检验,其中非农业人口、农业人口、耕地面积、工业总产值预测模型满足一级模型,等级为良好。牲畜头数预测模型为不合格模型,分析其原因,主要是因为时间序列数据不完全符合指数规律。通过定额法计算,预计75%保证率时2005年和2010年关中地区工农业需水量分别占总需水量的92.21%和89.75%,生活需水量分别占7%和9.04%。     

Holocene record of productivity in the NW Iberian continental shelf

A multiproxy approach (textural characteristics, heavy metal concentrations and benthic foraminifera data) was adopted to study the OMEX core KSGX 40, collected at the Galicia Mud Deposit (NW Iberian outer continental shelf) and recording the last ca. 4.8 ka cal BP. Geochemical profiles of Fe, Mn, Zn, Co, Cr, Cu, Ni, Pb, Al and Ca show significant temporal variations. Benthic foraminifera productivity proxy suggests that the recorded muddy events were contemporaneous of a higher C_org flux to the marine benthic environment. The higher flux of organic matter, following a long-term intensification of the upwelling and coinciding with a finer sedimentation, led to depressed levels of oxygen beneath the water-sediments interface and to early diagenetic processes of several redox-sensitive elements.     

Weathering and climate change since l820 AD in Hoh Xil, Qinghai-Xizang Plateau, China——Evidence from element geochemistry of lake sediments of Gulug Co Lake

Element geochemistry of lake sediments has been widely used to detect climate change because element composition and ratios can reflect the weathering degree in the source area. Given the dement composition of lake sediments from Gulug Co Lake, Hoh Xil, Qing- hai-Xizang Plateau, chemical index of alteration （CIA）, index of composition variability （ICV） and other element ratios have been used to establish the weathering sequence of this area since 1820 AD. The weathering is so weak that the element composition change is more sensitive to climate change and autochthonous processes. From 1820 to 1984 AD, there were two drier periods with a wetter interval from 1870 to 1945 AD. After 1984 the weather showed a tendency of becoming wet.     

Determination of potential hazardous elements in Can coals （Canakkale- Turkey）-I

It is known that the increasing use of coal as an energy source led to the growing environmental and health problems. But comprehensive knowledge of coal quality parameters may help to reduce some of these problems. The Canakkale-Can coalfield is located in the western part of Turkey, whose reserves are estimated at 69.3 billion tons, mainly used in the industry in the neighboring areas, specifically for the Can Thermal Power Plant. The aim of this study is to determine the coal quality parameters and examine the origin and distributions of potentially toxic trace elements in lignite which may produce environmental and health hazards in the area. The coal samples were collected from different parts of the coalfield in Can. Proximate and ultimate analyses, sulfur form analyses, X-ray powder diffraction （XRD）, inductively coupled plasma-mass spectrometry （ICP-MS）, and scanning electron microscopy （SEM） were performed on those samples to determine the geochemical profile of hazardous elements.     

Elements pollution in the extremely high tumor risk residents in Chaoshan littoral, southern China

Background ＆ aim： To investigate and analyze the elements pollution in the extremely high tumor risks residents in the Chaoshan littoral, southern China. Methods： 19 elements including Cr, Mn, Ni, Sr, Pb, Zn, Co, Sn, Th, Tl, Se, Hg, Cu, Mo, Cd, Sb, U, Ge, As, and Al were measured from 145 hair samples of residents from the high-risk Nanao Island （mortality of cancer 173-156/106 in recent 30 years）, Shantou high-risk village （mortality of cancer 230.4/106 in recent three years）, and two controls Shanwei （mortality of cancer 32/106 in 1970s） and Meizhou Hakka （incidence of cancer 103/106 ） using AAS, AFS, ICP-MS methods collaborated with Beijing University. And 21 samples of water, 18 samples office from the Nanao Island, Shantou high-risk village, and other low-risk controls were measured using the same methods. Results： The element analysis showed that levels of CD, PB in the Shantou high-risk village were the highest, Hg, MN, SR, SB, TH, U on the Nanao Island were the highest in hairs. Conclusions： It is indicated that there occurred elements pollution among the local high-risk population.     

用于砾石夹层钻进的新型PDC钻头的研制与使用

无压浸渍工艺生产的PDC石油钻头钻遇砾石夹层不适应。根据砾石夹层砾石坚硬、软硬互层、非均质、研磨性强的特点，研究了新型PDC钻头，在钻头结构上主要采取外抛内锥带辅助切削齿的结构形式，在复合片上主要采用非平面结合方式，即采用双向多条直槽非平面结合。按此方案设计与生产了3只钻头，分别在3口井试用，直接钻穿砾石夹层馆陶组地层井段，钻井效率提高26%，突破了砾石夹层钻进不能使用PDC钻头的禁区。     

Discrete numerical modelling of rockfill dams

The aim of this study is to obtain quantitative information on the behaviour of rockfill used in embankment dams, and particularly on the influence of block breakage on the displacement field, from a numerical analysis using the Distinct element method. A methodology is set up to define the resistance of the 2D particles so that the same probability of breaking blocks may be reproduced as in a 3D material. The model uses the discrete element code PFC^2D (Itasca Consulting Group Inc., PFC2D (Particle Flow Code in Two Dimensions), Version 3.0, 2002) and considers breakable clusters of 2D balls. The different parameters are determined from experimental data obtained from laboratory tests performed on rock blocks. The model is validated by comparing the results of the simulation of shearing tests with actual triaxial tests on rockfill material published in the literature. The numerical analysis of block crushing in an actual dam is proposed in the last part of this paper. Copyright © 2006 John Wiley & Sons, Ltd.     

Naturally acidic and metalliferous waters at unmined volcanogenic massive sulfide deposits in the Bonnifield mining district, Alaska Range, east-central Alaska

The Bonnifield district hosts 26 tmmined volcanogenic massive sulfide （VMS） occurrences. Environmental geochemical samples of water and stream sediment were collected at several occurrences, concentrating on the two best-exposed and largest deposits, Red Mountain （RM） and Sheep Creek （SC）. Limited samples were also collected at the poorly exposed WTF deposit. The deposits are Late Devonian to Early Mississippian, and are hosted by felsic metavolcanic and carbonaceous schist members of the Totatlanika Schist or Keevy Peak Fm. Spring and stream waters at RM and SC have pH values commonly 〈3.5 （as low as 2.4 at RM and 2.5 at SC）, high conductivity （up to 11000 μS/cm）, and very high （Is to 100s mg/L） dissolved contents of Al, Cd, Co, Cu, Fe, Ni, and Pb. Waters at RM are characterized by extremely high REE contents （summed REE median 3200 μg/L, n=33）. At both RM and SC, pyrite oxidation and dissolution produce low pH waters that interact with and dissolve bedrock minerals, resulting in acidic, metal-laden, naturally degraded streams that are mostly devoid of aquatic life. Ferricrete is common. In contrast, WTF barely produces a surficial environmental footprint, mostly due to topography and relief. RM and SC are well exposed in the areas of relatively high relief, and both exhibit extensive areas of quartz-sericite-pyrite-alteration. While WTF shares many of the same deposit-and alteration characteristics, it is concealed by tundra in a large, nearly flat area. Surface water at WTF is absent and outcrops are sparse. Even though WTF is roughly the same size as Red Mountain （both around 3 million tonnes） and has similar base- and precious-metal grades, the surficial geochemical manifestation of WTF is minimal. However, exposure through mining of the altered, mineralized rock at WTF potentially could initiate the same processes of pyrite oxidation, acid generation, and mineral dissolution that are observed naturally at RM and SC.     

A multi-method approach to study the stability of natural slopes and landslide susceptibility mapping

In this paper, a multi-method approach for the assessment of the stability of natural slopes and landslide hazard mapping applied to the Dakar coastal region is presented. This approach is based on the effective combination of geotechnical field and laboratory works, of GIS, and of mechanical (deterministic and numerical) stability analysis. By using this approach, valuable results were gained regarding instability factors, landslide kinematics, simulation of slope failure and coastal erosion. This led to a thorough assessment and strong reduction in the subjectivity of the slope stability and hazard assessment and to the development of an objective landslide danger map of the SW coast of Dakar. Analysis of the results shows that the slides were influenced by the geotechnical properties of the soil, the weathering, the hydrogeological situation, and the erosion by waves. The landslide susceptibility assessment based on this methodological approach has allowed for an appropriate and adequate consideration of the multiple factors affecting the stability and the optimization of planning and investment for land development in the city.