基于多分辨率分析的GF-5和GF-1遥感影像空—谱融合

针对空间分辨率比率较大尺度差异下的高分五号(GF-5)与高分一号(GF-1)卫星影像的空—谱融合问题,提出多传感器影像融合策略:一方面,通过现有空—谱融合方法的分步融合得到融合影像;另一方面,在分步融合理论基础上,推导得出一体化融合基础框架,并进一步提出基于多分辨率分析的多传感器一体化融合方法,缓解现有方法因空间分辨率比率过大导致影像空、谱互补信息难以有效集成的问题。其中,提出的一体化融合方法基于调制传递函数MTF (Modulation Transfer Function)滤波对多传感器影像空间(高频)和光谱(低频)分量进行分解提取,并充分考虑多传感器高空间分辨率影像与高光谱分辨率影像之间的关系,以及高光谱分辨率影像波段间关系,设计合理的融合权重,最终可得到具有最高空间分辨率和最高光谱分辨率的融合影像。通过GF-1全色影像、GF-1多光谱影像、GF-5高光谱影像数据对提出方法进行实验验证,结果表明:本文方法可有效集成多传感器影像间的空、谱互补信息,得到较优融合结果。     

冬、夏季渤黄海表层沉积物粒度特征差异及其成因分析

对渤海、黄海海域冬、夏两季表层沉积物取样,通过激光粒度仪得出粒度参数,进而分析讨论冬季强的沿岸流的作用、黄海暖流、夏季冷水团的影响以及地形、海底地貌特征、物源特征等对表层沉积物分布造成的影响。结果表明,冬、夏两季渤黄海表层沉积物粒度特征总体上相差不大,但部分海域如渤海中北部、渤海中南部、北黄海西北部近渤海海峡北部海域、山东半岛东北部海域、南黄海中部沉积物粒度特征存在明显季节性差异。表层沉积物粒度特征季节性差异与地形地貌、沿岸流、黄海暖流、黄海冷水团及物源密切相关。本研究对于探讨渤黄海不同季节表层沉积物沉积特征的影响机制、了解渤黄海区海洋动力过程的季节差异有积极意义。     

桑沟湾沉积碳库年汇入速率的长期变化及其区域性差异

对取自桑沟湾北西南三根柱样近200 a碳来源及埋藏通量的解析,分析了湾内不同站位各形态碳的差异性,进而对全湾碳埋藏进行了估算。湾内环流、贝藻养殖等造成湾内不同区域碳埋藏的差异;桑沟湾总碳（TC）平均量1.79%,有机碳（TOC）平均量0.54%,无机碳（TIC）平均量1.25%,TOC含量相对较小,为海陆混合来源,以陆源有机碳（C_t）为主,大规模人工养殖后,海源有机碳（C_a）有明显增加的趋势。桑沟湾碳埋藏通量平均为228.9 g/（m2·a）,以无机碳为主要埋藏形式（约占70%）,高的沉积速率及生物残骸沉降使桑沟湾养殖区碳的来源及埋藏区别于其他陆架海域。     

Solving the linearized forward-speed radiation problem using a high-order finite difference method on overlapping grids

The linearized potential flow approximation for the forward speed radiation problem is solved in the time domain using a high-order finite difference method. The finite-difference discretization is developed on overlapping, curvilinear body-fitted grids. To ensure numerical stability, the convective derivatives in the free-surface boundary conditions are treated using an upwind-biased stencil. Instead of solving for the radiation impulse response functions, a pseudo-impulsive Gaussian type displacement is employed in order to tailor the frequency-content to the discrete spatial resolution. Frequency-domain results are then obtained from a Fourier transform of the force and motion signals. In order to make a robust Fourier transform, and capture the response around the critical frequency, the tail of the force signal is asymptotically extrapolated assuming a linear decay rate. Fourth-order convergence of the calculations on simple geometries is demonstrated, along with a nearly linear scaling of the solution effort with increasing grid resolution. The code is validated by comparison with analytical and semi-analytical solutions using submerged and floating closed-form geometries. Calculations are also made for a modern bulk carrier, and good agreement is found with experimental measurements.     

米氏凯伦藻细胞表面膜蛋白质组及其对温度变化的响应研究

米氏凯伦藻(Karenia mikimotoi)近年在我国福建、浙江和广东沿海经常形成赤潮,其赤潮不仅影响到海洋生态系统的稳定,也严重威胁到水产养殖以及人类生命健康安全。本论文以米氏凯伦藻为研究对象,建立了米氏凯伦藻细胞表面膜蛋白质荧光标记技术和细胞膜蛋白质提取方法,运用荧光差异凝胶电泳技术(2-DDIGE)对膜蛋白质进行了分析,并研究了米氏凯伦藻的膜蛋白质组及其对环境温度变动的响应。实验共鉴定到44个细胞表面膜蛋白,其中有效注释27个,主要为转运蛋白、HSP70蛋白家族和捕光蛋白等。米氏凯伦藻在20°C条件下的细胞生长和光合作用要明显好于16°C和12°C,但16°C和12°C条件下的差别不大,表明低温限制了米氏凯伦藻的生长。当米氏凯伦藻从12°C快速转移至16°C和20°C时,藻细胞密度和光合作用效率短时间迅速降低,但细胞很快即适应温度变化。细胞膜上的转运蛋白和光合作用蛋白在其适应温度变化中起着重要作用。     

Damage assessment for submarine photoelectric composite cable under anchor impact

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.     

基于连续帧间差分的抛弃式探头三维下沉运动处理方法研究

抛弃式探头由无人机装载,能够在较远目标区域和危险海域开展海洋水文环境剖面参数的测量。通过安装不同传感器,可以实现对温度、盐度的剖面测量,其深度的测量采用数学方法计算得到。针对双摄像机水箱实验获得的5个不同攻角实验结果,分析了常用的运动目标的检测方法,最终选择基于连续帧间差分法,确定探头的三维坐标位置,进而得到探头下沉运动的三维运动轨迹和速度曲线等信息。探头从水面释放后攻角在下沉过程中不断调整,改变运动姿态,同时伴随自身的旋转,抵消水平方向阻力作用,初始攻角产生的深度测量误差主要体现在加速过程,探头达到匀速运动后测量误差不变,在不考虑横流的情况下,探头最后以匀速垂直下落运动。     

水文重力效应改正中一维地下水模拟算法的对比

基于一维地下水渗透方程详细推导其有限差分解算过程,引入不同于显式差分的隐式差分和中心差分格式,对比分析不同差分格式对地下水模拟结果及其相应地下水重力效应的影响,并对其中的层间参数取值和非线性方程的线性化问题进行探讨。结果表明,在日本Isawa扇形地区超导台站,不同层间参数加权公式能够引起最大约0.15 μGal的重力效应差异,影响在1.9%以内;不同差分格式和线性化方法组合形式能够引起最大约0.12 μGal的重力效应差异,影响在1.5%以内。     

Pipe laying simulation with an active reel drive

Dynamic and quasi-static models for analysis of a pipe lay spread are presented in the paper. Depending on the type of a pipe, spooling it on a big drum (reel) may cause plastic deformations. When the pipe is reeled out at sea, again it undergoes plastic deformations. In order to model such a nonlinear behaviour, a model, which includes both elasto-plastic material characteristics and large deformations, is required. Discretisation of the pipe is performed by means of the Rigid Finite Element Method (RFEM), which allows us to study static and dynamic problems, taking into account required properties of the model. Different sea conditions are simulated and analysed. It is shown how operational conditions can limit the ability of laying operation by a dedicated vessel, due to an unstable system response. The second part of the paper presents an upgrade of a passive reel drive by application of an active drive. In the model used for control applications, the pipe is modelled by a neural network. This allows us to perform a real-time calculations. In this fast-response calculation model, nonlinear aspects of the system are taken into account. The improvements in a pipe laying vessel performance are presented by some results of numerical simulations. The conclusions are also formulated.     

日本囊对虾(Marsupenaeus japonicus)3个野生种群和1个养殖种群的形态差异与判别分析

采用3种多元分析方法,对3个野生种群和1个养殖种群的13个形态比例参数进行比较研究。聚类分析结果表明,广东湛江和海南临高的种群形态最接近,福建厦门种群的趋异程度最大。主成分分析构建了6个主成分,其贡献率分别为:第1主成分23.084%,第2主成分17.976%,第3主成分15.321%,第4主成分13.84%,第5主成分12.707%,第6主成分7.770%,累积贡献率为90.699%。逐步判别选入6个贡献率较大的性状进行判别分析,F检验结果显示,4个种群形态差异显著(P0.01);同时建立了4个种群的判别函数,其判别准确率P1、P2均为100%。综合判别率为100%。3种多元分析结果均认为,4个种群日本囊对虾在形态上已产生一定程度的差异,且集中表现在体重、头胸甲的性状上。