基于动态图像变形的PP与PS波层位直接匹配

多分量地震资料的矢量偏移、多波地震资料的联合解释与反演均需要估算纵横波的速度比,实现纵波与转换横波在时间或深度域的匹配.基于DTW,本文实现了一种适用于PP与PS波直接匹配的动态图像变形算法.该算法分为三个部分：首先,使用二阶对称动态规划算法逐样点递归计算PP与PS波走时或深度的误差累积和;其次,在以误差累积和为目标函数的回溯阶段设定变形窗,并在纵横波速比约束的变形窗内递归回溯搜索匹配路径;最后,根据最大相关系数判定准则在匹配路径中确定最佳匹配路径,获得使PP与PS波匹配的拉伸或压缩时移量.利用所获得的拉伸压缩时移量计算纵横波速度比就可以实现PP与PS波之间的匹配.模型与实际陆上多分量地震资料测试结果表明：该方法具有较高的匹配精度,且对于信噪比、相似度较低的多分量地震资料,该方法也能产生较好的匹配效果.

     

使用宽频带地震记录研究2017年6月24日茂县新磨滑坡的动力学过程

北京时间2017年6月24日5时39分左右,四川省茂县叠溪镇新磨村发生大型岩质滑坡.体积约4.3×10⁶ m³的巨型岩体从山顶脱落,顺坡滑行约2.6 km后破碎沉积;碎屑物掩埋了整个新磨村,造成了巨大的人员伤亡和财产损失.本文使用来自滑坡周围的10个地震台站的宽频带观测资料的长周期信号反演了这次滑坡的受力时间函数;同时使用逐步细化的格点搜索方法得到了滑坡的位置,与其真实位置一致;根据反演的受力时间函数计算了滑坡过程中滑体的运动学参数,得到的滑体运动轨迹与实际路径吻合.综合分析地震信号、受力时间函数和运动学参数表明,本次滑坡主运动的持续时间约为79 s;脱落岩体在5∶38∶50.2启动后持续加速,在5∶39∶37.2达到速度峰值,约为52.1 m·s^-1;这段时间内岩体没有明显的破碎;之后,岩体开始铲刮并裹挟古滑坡造成的碎屑沉积物,自身也开始破碎解体,总体开始减速运动,直到5∶40∶9.2主运动停止;此后,小规模的碎屑散落又持续了约10 s的时间.     

ACTIVE system for monitoring volcanic activity: A case study of the Izu-Oshima Volcano,Central Japan

A system is proposed for the monitoring of changes in the underground structure of an active volcano over time by applying a transient electromagnetic method. The monitoring system is named ACTIVE, which stands for Array of Controlled Transient-electromagnetics for Imaging Volcano Edifice. The system consists of a transmitter dipole used to generate a controlled transient electromagnetic (EM) field and an array of receivers used to measure the vertical component of the transient magnetic field at various distances, with automatic operation of both units. In order to verify the performance of the proposed system, numerical and field experiments were carried out by application of the system to the Izu-Oshima volcano, where a remarkable change in the apparent DC resistivity over time had been detected in association with the eruption in 1986.     

起伏地表地震波场角度域照明分析

角度域照明可以更加细致地对地下复杂地质体进行照明分析。提出了一种适用于起伏地表条件下的角度域照明分析方法,其主要过程是利用局部倾斜叠加技术分解波场,对起伏地表处采用加权函数判定局部时窗内的振幅包络位置,以区分其位于地表之上或之下;并引入相似系数函数计算反假频局部平面波场,根据局部斜率与平面波场入射角关系,得到局部角度域地震波场;根据帕斯瓦尔等式下的时间-角度域照明关系式,计算得出角度域照明强度。通过起伏地表高速侵入矿体模型试算,得到给定观测系统下角度域照明强度与地下分析点照明随炮点、波场入射角的变化关系。此方法可用于起伏地表条件的观测系统优化、叠前AVA分析等方面。     

Statistical analysis of seismic data from north-western and western Argentina

Due to the process of subduction of the Nazca Plate, high seismic activity is observed near the Argentine Andean range between 21°S and 36°S. The new version of the Argentine Seismic Catalogue, which includes well-defined events during the period 1964–1989, allows us to perform an analysis of seismic risk.Earthquakes with epicenters in the provinces included in the north-western and western regions were studied using Gumbel III extreme value distribution. Modal extreme magnitudes and return periods were calculated for both regions and the results were compard with the ones obtained through the entire process techniques (both analytical and graphical).As a first study, we analyzed each province separately, after which mean values for each region were obtained. Modal values around 5–5.5 have been found and times of recurrence for events withm _b >6 of approximately 25 years were obtained.Also at CONICET (Consejo Nacional de Investigaciones Cientificas y Técnicas).     

利用克里金技术标定新疆及附近地区P/S震相幅值比及其在地震事件识别中的应用

针对中国的乌鲁木齐台（WMQ）和哈萨克斯坦的马坎奇台（MAK）,采用贝叶斯克里金技术建立了新疆及附近地区地震事件的震相幅值比的校正曲面,并分析了校正曲面与地震波传播路径的关系,以及校正曲面对于改善震相幅值比判据识别效果的有效性.分析结果表明,建立的校正曲面基本合理,结合传播路径差异和地震波传播规律,能够较好地解释校正曲面的起伏特征. 而且,在传播路径差异较大,使得震相幅值比经震中距校正后离散度仍然较高的情况下,利用校正曲面修正震相幅值比,可以进一步降低其离散度,从而改善判据的识别效果.经校正曲面修正后,对天然地震的误识率由16.3%下降为5.2％.     

水域地震映像法及其在海洋地质调查中的应用

随着水上(海洋)地质调查的迅速发展,曾在陆地地质调查中发挥过重要作用的地震映像法便延伸到水域(海洋)地质调查中来。但由于水陆环境不同,水域地震映像法的工作原理与陆域地震映像法并不相同,它只是一种浅层地震反射波探测方法——当其采用单道接收时,即为海洋地质调查中的单道地震调查;当其采用多道接收时,即为海洋地质调查中的高分辨率多道地震调查。同时,由于水域映像法在其声波发射及接收系统上有其独到之处,在海洋地质调查中可作为水域浅地层剖面测量及地震调查的补充。     

南北地震带南段远震P波走时层析成像研究

南北地震带南段位于青藏高原东南缘,是青藏高原与扬子克拉通的过渡地带.本文收集了该区域内90个固定台站和356个流动台站的远震波形数据,采用波形互相关方法拾取了88691个P波走时残差数据,应用FMTT(Fast Marching Teleseismic Tomography)层析成像方法获取了南北地震带南段深部的三维P波速度结构.结果显示了研究区深部的结构具有显著的不均匀性:腾冲火山地区深部400 km以浅的深度内分布着明显的低速异常;四川盆地西南部下方300 km内具有较强的高速异常;在上地幔顶部,沿川滇菱形块体周边的大型断裂带及川滇菱形块体南端分布着显著的低速异常,这些低速异常为青藏高原物质向东南方向挤出提供了必要的通道;保山地块下方存在一东倾的高速异常带,该高速异常带为印度板块岩石圈向东俯冲的体现.     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.