Groundwater transformation of a low-sulfur to a high-sulfur coal, the Harlem coal of the northern Appalachian basin

The Harlem coal is postulated to have been deposited in raised-bog settings. It was initially deposited as low-sulfur peat, but groundwater of a later origin altered portions of it to high-sulfur coal. The total sulfur content of 172 samples from 31 locations on a moisture- and ash-free basis have a quadrimodal distribution with two major modes at 0.75% S and 2.0%S. Multiple sampling and analyses at specific mine sites indicate that the addition of sulfur of a later origin occurred either laterally adjacent to sandstone channels or vertically adjacent to faults. Significant sulfur addition also occurred above clay partings at these sites. The original low-sulfur nature is preserved where the coal bed is isolated from descending groundwater by a thick impervious layer. Trace-element analyses show high concentrations of mobile elements such as Na and Mn in the high-sulfur coals.     

Reservoir Diagenesis Sequence and Framework in Intracontinent Rift Basin,East China

ＲｅｓｅｒｖｏｉｒＤｉａｇｅｎｅｓｉｓＳｅｑｕｅｎｃｅａｎｄＦｒａｍｅｗｏｒｋｉｎＩｎｔｒａｃｏｎｔｉｎｅｎｔＲｉｆｔＢａｓｉｎ，ＥａｓｔＣｈｉｎａ＊ＬｉＺｈｏｎｇＩｎｓｔｉｔｕｔｅｏｆＧｅｏｌｏｇｙ，ＣｈｉｎｅｓｅＡｃａｄｅｍｙｏｆＳｃｉｅｎｃｅｓ...     

三江盆地七星河区成因地层分析

区内存在５种等时性地层界面，据此将含煤岩系划分为６个成因单元，１０个亚单元。沉积环境经历了５个演化阶段，其中扇三角洲废弃阶段为最有利的聚煤时期。聚煤的有利部位位于废弃的扇三角洲体之上。     

关于成岩作用与变质作用界线的讨论：从沸石相谈起

成岩作用与变质作用界线的划分是当前地质学界关注的焦点之一。传统的观点将沸石相作为最低级变质相，本文以鄂尔多斯盆地东部上三叠统延长组的浊沸碱玫吐鲁番－哈密盆地哈密凹陷三叠系的浊沸石为例，提出浊沸石的形成为高ｐＨ值，低Ｐｃｏ２和Ｘｃｏ２高钙离子活度，高ＳｉＯ２活性的高盐度等，稳定在从８０℃到２００℃左右的广大温度范围内，常与油气生成带一致，属成岩矿物相，取消沸石相，用明确的综合划分标志来确定成岩作用与     

Texture and mineralogy of sediments from the Ganges-Brahmaputra-Meghna river system in the Bengal Basin, Bangladesh and their environmental implications

 The Bengal basin, Bangladesh, represents one of the most densely populated recent floodplains of the world. The sediment flux through the basin is one of the highest on a global scale. A significant portion of this sediment load find its sink in the basin itself because of its lower elevation and frequent flooding. The textural, mineralogical and chemical nature of the sediments thus have an important bearing on the environmental quality of the basin as well as for the Bay of Bengal. The sediment load of the Ganges-Brahmaputra-Meghna (GBM) river system consists exclusively of fine sand, silt and clay at their lower reaches within the Bengal basin, Bangladesh, and is deposited under uniformly fluctuating, unidirectional energy conditions. The sediments have a close simitarity in grain size with the sediments of the surrounding floodplain. The mineral assemblage is dominated by quartz and feldspars. Illite and kaolinite are the major clay minerals, and occur in almost equal proportion in bed sediments. The heavy mineral assemblage is dominated by unstable minerals which are mostly derived from high-rank metamorphic rocks. The characteristic smaller grain-size, i.e. having large surface-to-mass ratios, and the mineralogy of sediments suggests that they are susceptible to large chemical adsorptive reactions and thus could serve as a potential trap for contaminants. However, the sediments of the GBM river system in the Bengal basin, Bangladesh, shows lower concentration of Pb, Hg and As, and a marginally higher value for Cd as compared to that of standard shale. Considering population density and extensive agricultural practice in the basin, the sediments can in the long run become contaminated. Received: 9 November 1994 · Accepted: 18 June 1996     

Seismotectonic environment of occurring the February 3, 1996 Lijiang M=7.0 earthquake, Yunnan Province

Introduction The surface rupture and aftershocks of the February 3, 1996 Lijiang earthquake are basically distributed along the N-S-trending Lijiang-Daju fault, which is boundary fault between Lijiang Quaternary, fault controlled basin and Yulong-Haba range (ZHANG, et al, 1997). Corresponding to the surface geological features, the focal rupture of the Lijiang earthquake also shows large component of dip-slip. It is of great difference from that of other earthquakes in west Yunnan, in w…     

Magmatic effects of the lunar late heavy bombardment

Large volumes of mare basalts are present on the surface of the moon, located preferentially in large impact basins. Mechanisms relating impact basins and mare basalt eruptions have previously been suggested: lunar impacts removed low-density material that may have inhibited eruption, and created cracks for fluid flow [Icarus 139 (1999) 246], and lunar basins have long been described as catchments for magma (e.g., [Rev. Geophys. Space Phys. 18 (1980) 107] and references therein). We present a new model for melt creation under near side lunar basins that is triggered by the impacts themselves. Magma can be produced in two stages. First, crater excavation depressurizes underlying material such that it may melt in-situ. Second, the cratered lithosphere rises isostatically, warping isotherms at the lithosphere-asthenosphere boundary which may initiate convection, in which adiabatic melting can occur. The first stage produces by far the largest volume of melt, but convective melting can continue for up to 350 Ma. We propose that giant impacts account for a large portion of the volume and longevity of mare basalt volcanism, as well as for several compositional groups, including high alumina, high titanium, KREEP-rich, and picritic magmas.     

Geochemistry of the subduction-related magmatic rocks in the Dahong Mountains, northern Hubei Province——Constraint on the existence and subduction of the eastern Mianle oceanic basin

Being a composite collisional orogen between North China and South China blocks, the Qinling orogenic belt is the key to understand the composite combination, prolonged evolutionary history and their continental dynamics. The main suture between north and south Qinling, called Shangdan suture zone (SDSZ), had been studied in detail for about twenty years. Recently, another suture zone, called Mianl黣 suture zone (MLSZ), has been identified in the Qinling Mountains. It is characterized b…     

2003年淮河流域大水期间体积降水量的研究

针对 2 0 0 3年梅雨期淮河流域大水提出了体积降水量的概念及其计算方法 ,在计算出淮河流域和其各子流域逐日和总体积降水量的基础上 ,将体积降水量与水文站的水位和流量进行了对比分析。结果表明 :水位对累计体积降水量有较好的即时响应 ,流量对体积降水量有较好的延迟响应。另外 ,讨论了流域体积降水量的预报问题 ,用国内外数值天气预报产品和中央气象台指导预报产品 ,进行了流域体积降水量预报试验 ,并对预报结果进行了检验分析。结果表明 :在目前天气预报水平条件下 ,利用数值天气预报和中央气象台业务预报产品制作体积降水量是可行的 ,能够延长洪水预报的预见期 ;而且 ,数值天气预报产品在预报体积降水量方面有明显的优势 ,因此可以直接利用数值天气预报产品进行体积降水量的客观预报 ,为防汛工作提供重要的依据。     

含煤盆地煤储层后期改造形式及对煤层气选区影响--以华北克拉通选区为例

阐述了改造型含煤盆地煤储层被改造的两种形式；煤体结构的改造及构造煤的形成原因；后生充填物对煤层孔隙的改造及形成原因。提出了以构造煤发育程度作为改造型含煤盆地改造强度的一个指标。概述了华北克拉通盆地由中生代剪压应力转化为新生代剪张应力和拉张应力，而在盆地内形成以挤压构造为主到伸展构造为主的演化历程，及不同构造类型的区域分布，指出这种演化极易形成构造煤和后生充填物。提出将华北克拉通含煤盆地分为3种改造类型及其分布区域，分析了各自区域的煤储层物性及对煤层气开发选区的影响。提出应重视鄂尔多斯盆地侏罗纪煤层的煤层气．研究与开发．