Autoxidation of N(III), S(IV), and other Species in Frozen Solution – A Possible Pathway for Enhanced Chemical Transformation in Freezing Systems

The chemistry of glycolaldehyde (hydroxyacetaldehyde) relevant to the troposphere has been investigated using UV absorption spectrometry and FTIR absorption spectrometry in an environmental chamber. Quantitative UV absorption spectra have been obtained for the first time. The UV spectrum peaks at 277 nm with a maximum cross section of (5.5± 0.7)×10^–20 cm² molecule^–1. Studies of the ultraviolet photolysis of glycolaldehyde ( = 285 ± 25 nm) indicated that the overall quantum yield is > 0.5 in one bar of air, with the major products being CH₂OH and HCO radicals. Rate coefficients for the reactions of Cl atoms and OH radicals with glycolaldehyde have been determined to be (7.6± 1.5)×10^–11 and (1.1± 0.3)×10^–11 cm³ molecule^–1 s^–1, respectively, in good agreement with the only previous study. The lifetime of glycolaldehyde in the atmosphere is about 1.0 day for reaction with OH, and > 2.5 days for photolysis, although both wet and dry deposition should also be considered in future modeling studies.     

地球化学反应模型的发展及其应用

根据近年来地球化学反应模型的发展及其应用现状，对新发展的建模方法手段、模型计划方法以及模型计算软件作了简要的归纳和评述，最后以地球化学反应模型用于成矿动力学研究的应用为例，说明地球化学反应模型在地球化学研究中，对了解反应体系中物质的形态，分布、迁移和转化，起着重要的作用。     

Hydrothermal Alteration Zoning and Kinetic Process of Mineral-Water Interactions

This study reports the kinetic experimental results of albite in water and in KCI solution at 22 MPa in the temperature range of 25 to 400℃. Kinetic experiments have been carried out in an open flow-through reaction system (packed bed reactor). Albite dissolution is always incongruent in water at most temperatures, but becomes congruent at 300℃ (close to the critical point 374℃). At temperatures from 25 to 300℃, the incongruent dissolution of albite is reflected by the fact that sodium and aluminum are easily dissolved into water; from 300 to 400℃ it is reflected by silicon being more easily dissolved in water than Al and Na. Maximum albite dissolution rates in the flow hydrothermal systems have been repeatedly observed at 300℃, independent of flow rates.The kinetic experiments of albite dissolution in a KCl aqueous solution (0.1 mol KCl) indicate that the dissolution rate of albite increases with increasing temperature. Maximum silicon release rates of albite have been observed at 400℃, while ma     

成矿流体研究的若干进展与动态

近年成矿流体研究在大规模流体的存在与运移、巨型矿床与流体的关系、成矿流体输运动力学、建立热液成矿反应体系及成矿流体分测试技术等方面取得了重要进展；今后成矿流体研究在流体的运移路径与成矿预测、超临界流体与金属矿产巨量堆积的关系及成矿流体的计算机模拟等方面走势明显。     

pH值对长石溶解度及次生孔隙发育的影响

本文从长石溶解反应的机理及各离子形态在溶液中分布的热力学角度出发 ,论述了pH值对三个长石端员及高岭石在流体中溶解度的影响。在此基础上 ,进一步探讨了流体酸碱度对长石向高岭石转化和次生孔隙发育程度的制约 ,并提出了衡量次生孔隙发育程度的参数———转化系数D。     

富硫尾矿对矿渣水化反应生成钙矾石的影响

用红外光谱、X射线衍射和扫描电子显微等现代微观微区测试手段，对高炉矿渣及含硫高的矿山尾矿砂混合体系的水化反应过程进行检测和分析，了解这一过程中新、旧物相的变化情况，通过对主要新生相钙矾石的生长和生成量的检测，选出理想的激发剂和合适的养护时间，从而给出以高炉矿渣作粘合剂，以富硫尾矿砂作骨料研制新型建筑材料的具体工艺条件。     

红辉沸石合成P型沸石试验研究

以广西资源红辉沸石为原料进行合成P型沸石的最佳工艺流程及相关技术参数研究，提出了工艺流程为红辉沸石（酸处理）→水热反应→晶化→洗涤、过滤→烘干→P型沸石产品，最佳工艺技术参数为硅铝摩尔比[n(SiO2)/n(Al2O3)]3-4，碱度4－5mol/L NaOH，晶化温度95－100℃，晶化时间6－8h。     

Physical structure features of the crust at southeast region of Tibetan Plateau

Chemical reactions of plagioclase, biotite and their single minerals, as well as a mineral mixture of (plagioclase+biotite+quartz), with KCl and (KCl+KHCO₃) solutions were carried out at 150–400°C and 50–80 MPa. Experiments show that alkaline fluid promotes plagioclase’s changing into potash feldspar, while acid fluid helps plagioclase, potash feldspar and biotite alteration form chlorite and sericite. After chemical reaction the acidity-alkalinity of solutions often changes reversely. It was observed that gold dissolved from the tube wall and recrystallized on the surfaces of biotite and pyrite. Therefore the transportation and enrichment of gold are related to the elementary effect of the fluid-mineral interfaces. Fe³⁺-Fe²⁺, as an oxidition-reduction agent, and volatile components Cl^- and CO₂ play important roles in the reaction process     

孔兹岩系内棱柱状夕线石的成因

对我国鄂西及黑龙江省东部孔兹岩系的地质观察发现,含棱柱状夕线石的高铝夕线片岩类与含红柱石的云母片岩类岩石在区域上共生。系统的岩相学研究表明,这些夕线石系由叶蜡石直接转变所成。原岩恢复以及对变质作用过程中可能发生的变质反应的理论探讨和原始沉积物理想组分计算的结果都支持上述结论。认为孔兹岩系中的棱柱状夕线石和红柱石系低角闪岩相条件下在不同的原岩中经不同的变质反应形成。它们的形成主要受原岩的成分控制。这种由叶蜡石直接分解形成的夕线石,其初始形成温度较低,不能作为划分高角闪岩相的标志。     

吉黑东部斑岩型-浅成热液型铜金矿床多重成矿模型

通过四个典型矿床（小西南岔、闹枝、五凤和刺猬沟）的对比，发现它们在形成时间-空间一成因上既相互联系，又相互区别。小西南岔和闹枝矿床存在三个成矿流体系统：加热天水系统(A)、排放流体系统(B)、蒸气缕(steam plume)反应系统(C)；五凤和刺猬沟矿床只有一个成矿流体系统，即排放流体系统(B)。前者的成矿流体由浅成岩浆房的补给；后者的成矿流体主要为循环天水，浅成岩浆房的补给不明显。小西南岔金铜矿床产于中生代火山岩盆地边缘的隆起带，属于斑岩型矿床；闹枝金（铜）矿床产于中生代火山岩盆地内的断隆块，属于斑岩-浅成热液过渡型矿床；五凤和刺猬沟金（银）矿床产于中生代火山岩盆地内断裂带，属于浅成热液型矿床。在区域成矿上，由浅入深，浅成热液型斑岩-浅成热液过渡型和斑岩型构成多重成矿模型。