封顶覆盖黄土气体渗透特性测试及填埋气一维运移分析

黄土在我国西北地区广泛分布,是当地垃圾填埋场封顶覆盖层的主要材料,该材料的气体渗透特性直接影响了覆盖层对填埋气释放的控制效果。利用渗析技术和自制的气体渗透系数测量装置,模拟和测试了干湿气象条件下覆盖黄土服役含水率变化及其对气体渗透系数的影响,并建立填埋气在垃圾体和覆盖层中的一维稳态运移模型,分析了覆盖层气体渗透系数和抽气速率对填埋气释放控制效果的影响。研究结果表明：渗析技术能有效模拟覆盖黄土服役含水率的变化,压实黄土试样的气体渗透系数介于10-17～10-12 m2量级,随服役含水率的增加而降低,且对于压实度比较高的黄土降低得更加明显;覆盖层底部的填埋气压随气体渗透系数的减小而增大,通过覆盖层下部的气体扩散层负压抽气等措施,可有效减小覆盖层底部气压和填埋气的释放量。     

济阳坳陷特低渗透油藏地质多因素综合定量分类评价

在定量表征特低渗透油藏开发效果及地质特征的基础上,探讨特低渗透油藏开发效果主控地质因素。应用灰色关联分析法对济阳坳陷特低渗透油藏开展地质多因素综合定量分类评价,形成了一套以开发效果表征特低渗透油藏综合特征、从单井到区块基于灰色关联分析的特低渗透油藏地质多因素综合定量分类评价方法。研究结果表明,济阳坳陷特低渗透油藏主要为滩坝砂、浊积岩、砂砾岩沉积,具有埋藏深度大、粒度细、分选较好、孔喉微细、单层厚度薄、分布零散、比储量丰度低、流动性差的地质特点。定义累积产油差表征开发效果以反映特低渗透油藏综合特征,其主控地质因素为油层厚度层数比、砂岩厚度层数比、平均粒径、采油段中深、渗透率、孔隙度、比储量丰度。通过地质多因素综合定量分类评价,将济阳坳陷特低渗透油藏分为3类：Ⅰ类综合评价分数大于0.6,累积产油差大于4 500,开发效果最好;Ⅱ类综合评价分数0.4~0.6,累积产油差-2 500到4 500,开发效果中等;Ⅲ类综合评价分数小于0.4,累积产油差小于-2 500,开发效果差。利用不同区块已有开发数据检验,分类评价结果与实际生产情况一致性良好。Ⅰ类、Ⅱ类特低渗透油藏应该作为现阶段特低渗透油藏直井、水平井优先开发的对象。     

Fracture analysis in the south-western Corinth rift (Greece) and implications on fault hydraulic behavior

This paper reviews the data concerning the fracture network and the hydraulic characteristics of faults in an active zone of the Gulf of Corinth. Pressure gap measured through fault planes shows that in this area the active normal faults (Aigion, Helike) act, at least temporarily and locally, as transversal seal. The analysis of the carbonate cements in the fractures on both the hangingwall and the footwall of the faults also suggests that they have acted as local seals during the whole fault zone evolution. However, the pressure and the characteristics of the water samples measured in the wells indicate that meteoric water circulates from the highest part of the relief to the coast, which means it goes through the fault zones. Field quantitative analysis and core studies from the AIG-10 well have been performed to define both regional and fault-related fracture networks. Then laboratory thin section observations have been done to recognize the different fault rocks characterizing the fault zone components. These two kinds of approach give information on the permeability characteristics of the fault zone. To synthesize the data, a schematic conceptual 3D fluid flow modeling has been performed taking into account fault zone permeability architecture, sedimentation, fluid flow, fault vertical offset and meteoric water influx, as well as compaction water flow. This modeling allows us to fit all the data with a model where the fault segments act as a seal whereas the relays between these segments allow for the regional flow from the Peloponnese topographic highs to the coast.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

斯通利波和渗透率的关系分析

理论和实际资料证明,在渗透性地层,低频斯通利波出现的频散和能量衰减与地层渗透率有关,因此可利用斯通利波的传播速度和能量衰减等特性来估算地层渗透率。斯通利波的能量和渗透率负相关。因为斯通利波能量代表了斯通利波的有关信息,因此可以认定斯通利波和渗透率负相关。     

提水试验在含水层渗透系数求取中的应用——以黄岛地下水封石油洞库为例

在利用水文地质试验求取渗透系数的过程中,对于低渗透性含水介质,由于水量小,一般难于实施抽水试验方法,而提水试验能够很好地解决这一问题。以黄岛地下水封石油洞库为例,首先对提水试验的特点、步骤进行了简单介绍,然后根据裘布依稳定潜水井流原理求解渗透系数,并对库区渗透系数平面分布规律进行了分析,将含水层渗透性划分为三个区域。     

North-south transfer zones and paleo-morphological reconstruction of the Xylokastro area (Corinth Gulf, Greece)

A large number of studies have documented the structural and sedimentary architecture of the Corinth Gulf, especially the major E–W trending normal faults important in accommodating the main extensional strain and associated growth of the Gilbert fan deltas. However, the role of several N–S oriented structures that crop out at the surface and are detectable at depth by seismic reflection and gravity surveys are not clearly understood. Based on new geological data, collected near Xylokastro, we describe the N–S oriented tectonic activity of this area. The mapped inland faults correspond to off-shore structures identified in re-interpreted seismic lines and appear to have acted as a major transfer zone during the opening of the Corinth Gulf. Reconstruction of the paleo-topography based on sedimentary facies and the environment of clay mineral formation suggest these transfer zones played an important role in controlling both local structural relief and depositional conditions of the Gilbert fan deltas.     

Imaging the ramp–décollement geometry of the Chelungpu fault using coseismic GPS displacements from the 1999 Chi-Chi, Taiwan earthquake

We use coseismic GPS data from the 1999 Chi-Chi, Taiwan earthquake to estimate the subsurface shape of the Chelungpu fault that ruptured during the earthquake. Studies prior to the earthquake suggest a ramp–décollement geometry for the Chelungpu fault, yet many finite source inversions using GPS and seismic data assume slip occurred on the down-dip extension of the Chelungpu ramp, rather than on a sub-horizontal décollement. We test whether slip occurred on the décollement or the down-dip extension of the ramp using well-established methods of inverting GPS data for geometry and slip on faults represented as elastic dislocations. We find that a significant portion of the coseismic slip did indeed occur on a sub-horizontal décollement located at 8 km depth. The slip on the décollement contributes 21% of the total modeled moment release. We estimate the fault geometry assuming several different models for the distribution of elastic properties in the earth: homogeneous, layered, and layered with lateral material contrast across the fault. It is shown, however, that heterogeneity has little influence on our estimated fault geometry. We also investigate several competing interpretations of deformation within the E/W trending rupture zone at the northern end of the 1999 ground ruptures. We demonstrate that the GPS data require a 22- to 35-km-long lateral ramp at the northern end, contradicting other investigations that propose deformation is concentrated within 10 km of the Chelungpu fault. Lastly, we propose a simple tectonic model for the development of the lateral ramp.     

Elman神经网络在低渗储层敏感性预测中的应用

油气储层敏感性是制约低渗储层有效开发的重要因素之一,但在勘探开发早期储层敏感性预测及分布规律的研究受到资料不足的限制.从实验敏感性分析结果入手,对Elman神经网络预测储层敏感性的过程及方法进行了系统的分析,并提出了通过设置虚拟井来预测储层敏感性平面分布的方法.结果表明:①影响低渗储层敏感性的主要因素有蒙皂石、伊利石、高岭石、绿泥石、伊-蒙混层、石英、长石的体积分数,孔隙度和渗透率;②Elman神经网络能够很好地预测低渗储层的敏感性,预测结果与实测结果绝对误差的平均值均低于0.04,水敏性样品的预测结果与实测结果绝对误差的平均值为0.001;③通过设置虚拟井位,能够很好地预测储层敏感性的平面分布规律.