On a power series solution to the Boussinesq equation

For certain initial and boundary conditions the Boussinesq equation, a nonlinear partial differential equation describing the flow of water in unconfined aquifers, can be reduced to a boundary value problem for a nonlinear ordinary differential equation. Using Song et al.'s (2007) [7] approach, we show that for zero head initial condition and power-law flux boundary condition at the inlet boundary, the solution in the form of power series can be obtained with Barenblatt's (1990) [2] rescaling procedure applied to the power series solution obtained in Song et al. (2007) [7] for the power-law head boundary condition. Polynomial approximations can then be obtained by taking terms from the power series. Although for a small number of terms the newly obtained approximations may be worse than polynomial approximations obtained by other techniques, any desired accuracy can be achieved by taking more terms from the power series.     

Dynamic link between the level of ductile crustal flow and style of normal faulting of brittle crust

In a rheologically layered crust, compositional layers have an upper, elasto-plastic part and a lower, viscous one. When broken, the upper elastic part undergoes flexure, which is upward for the foot-wall and downward for the hanging wall. As a consequence of bending, stresses will develop locally that can overcome the strength of the plate and, therefore, impose the migration of active fault. In the lower, viscous part of each compositional layer, rocks can potentially flow. Numerical modelling of the behaviour of a crust made up of two compositional layers, during and following extension, shows that flow can take place not only in the lower crust but also, and more importantly, in the lower part of the upper crust. The ability of crustal rocks to flow influences the style and kinematics of rifted regions. When no flow occurs, subsidence will affect the extending areas, both hanging wall and foot-wall will subside with respect to an absolute reference frame such as sea level, and there will be a strict proportionality between extension and thinning. In addition, the downward movement of the fault blocks will decrease the local stresses created in the foot-wall and increase those of the hanging wall, thereby imposing a migration of fault towards the hanging wall. This is the behaviour of extensional settings developed on stabilised crust and which evolved in a passive margin. When flow does take place, middle crustal rocks will move towards the rifting zone causing isostatically driven upward movements that will be superimposed on movements associated with crustal and lithospheric thinning. Consequently, fault blocks will move upwards and the crust will show more extension than thinning. The upward movements will decrease the stresses developed in the hanging walls and increase those of the foot-wall. Faults will then migrate towards the foot-wall. Such a mode of deformation is expected in regions with thickened crust and has its most apparent expression in core complexes.     

山东郯城麦坡中更新世地震事件记录*

山东郯城麦坡被命名为典型地震活动断层遗址,其最醒目的标志是郯庐断裂带主干断层(F₂)东盘的紫灰色下白垩统逆冲到断层西盘的红棕色第四系之上且界线截然。野外调查和试验分析表明,郯城麦坡第四系于泉组中发育液化砂涌管、液化砂脉、震裂缝充填构造和同沉积断层等地震引发的软沉积物变形构造——地震事件记录。根据软沉积物变形构造的砂质黏土光释光测年分析,推断这些软沉积物变形构造所记录的地震事件属郯庐断裂带主干断层F₂在中更新世晚期发生的强构造与地震活动。这些地震事件记录为研究郯庐断裂带新构造运动与地震活动提供了新资料,也丰富了该地震活动断层遗址的内涵。     

Coal mining along the Warfield Fault, Mingo County, West Virginia: a tale of ups and downs

Mine development along a 15-mile (24 km) section of the Warfield Fault in Mingo County, West Virginia has broadened the geological understanding of the fault and its related structures. The fault has been exposed in two new road cuts, one in the northeast-trending segment at Neely Branch and one in the eastern east-trending segment at the head of Marrowbone Creek. Both exposures show a well-defined normal fault with a 45° to 55° N dip, juxtaposing sandstone/shale packages from the roof and the floor of the Coalburg seam. The fault is associated with a thin gouge zone, some drag folding, and parallel jointing. Its trace tends to run parallel to the crest of the adjacent Warfield Anticline. Based on underground mine development and detailed core drilling, the vertical offset along the fault plane ranges from a maximum of 240 ft (73 m) in the central part of the area near the structural bend to less than 100 ft (30 m) in western and eastern directions. The fault is located along the relatively steeply dipping (locally in excess of 25%) southern limb of the Warfield Anticline, and appears related to a late phase of extension involving folded Pennsylvanian strata. On a regional scale, the lithological variations across the fault do not suggest any appreciable strike-slip component.Underground room and pillar mines in the Coalburg seam north and south of the fault have been greatly impacted by the Warfield structures. Due to the combined (and opposite) effects of the folding and faulting, the northern mines are located up to 400 ft (125 m) higher in elevation than the southern ones. Overland conveyor belts connect mining blocks separated by the fault. The practical mining limit along the steep slopes toward the fault is around 15%. Subsidiary normal faults with offsets in the 5- to 15-ft (1.5–4.5 m) range are fairly common and form major roof control and production hurdles. Overall, the Warfield structures pose an extra challenge to mine development in this part of the Appalachian Coalfields.     

低序级断层波动方程正演及特征分析

低序级断层是复杂断块油藏勘探开发的重要研究内容,对油田开发后期落实剩余油分布、解决注采矛盾具有重要意义.本文采用声波方程有限差分正演模拟,对以下几种情形进行了研究:(1)低序级断层与埋深、主频以及信噪比之间的关系;(2)观测系统对断层的影响;(3)物性差异产生的假断层问题;(4)大断层衍生出小断层的正演问题;(5)断层破碎带的影响以及断层封堵带含流体的影响.在上述理论模型正演分析的基础上,根据胜利油田典型构造带的地震剖面建立速度模型,研究了不同组合模式的低序级断层的识别能力,最后分析了波动方程正演模拟和褶积合成地震记录的区别.通过对低序级断层正演模拟特征的分析,得出了不同资料质量、不同地质情况以及不同组合模式下,能够准确识别的断层的极限.理论上能够识别的断层最小断距为7 m左右,最小可能会达到5 m,子波主频适当提高,数据采集时炮点和检波点越密集,道间距越小,多个断层的横向或纵向间隔越大,断层的落差越大时,越能够准确地定位断点并确定断层位置.本文研究成果对油田科研生产中低序级断层的正确判别以及提高断层检测方法的可信度方面具有重要意义.     

摩擦滑动对石英和方解石热释光性质的影响及其地震地质意义

通过高温高压实验及热释光测量建立了石英在100MPa和方解石在30MPa围压下剩余热释光强度随温度的变化曲线,以此为据,通过三轴摩擦实验前后样品的热释光测量,研究了相应围压、不同错动速率下摩擦滑动对石英和方解石剩余热释光强度的影响及其反映的温度变化。在此基础上,根据已有理论结果和实际资料,对利用热释光方法断代及推测断层活动方式的可能性等问题进行了讨论     

江西九瑞矿集区硅质断裂磨砾岩带的厘定及其成岩成矿意义

在九瑞矿集区研究叠合断裂和叠加成矿作用的基础上,我们进一步详细研究了出露在洋鸡山-丁家山-望夫山一线的硅质角砾岩,指出它们不是原先认为的石炭系沉积硅质岩,而应属于一种断裂磨砾岩,并深入探究其形成过程及与成矿之关系.断裂磨砾岩是断裂分带结构成熟的标志之一,多在剪切作用和热液作用下,断裂岩石经硅化-破裂-碎裂-粉碎-研磨,形成具有一定圆度和球度,大小差异较大的磨砾或磨粒,且又会反复的集结-破碎,不断拓宽断裂构造形成磨砾-角砾岩带.本文研究的断裂磨砾岩,呈北东向展布,延长达十几千米.成分上以硅化角砾岩为主,SiO2含量一般大于90％,石英颗粒由隐晶到显晶.一些角砾岩中含Fe2O3较高,有可能是原先的硫化物经氧化形成的褐铁矿.本区洋鸡山-丁家山-望夫山一线产出的断裂磨砾-角砾岩带,很可能是燕山期构造-岩浆-成矿事件的产物.在城门山和武山铜矿,我们之前的工作己发现存在产于泥盆系五通组和石炭系黄龙组层滑构造体系中的黄铁矿角砾岩,则有可能属于海西期同生断裂活动的产物.因此,这些不同的角砾岩具有多阶段活动和叠加成矿的特征.本文还进一步指出,九瑞地区其他层位(如泥盆系与志留系之间、志留系与奥陶系之间)发育的层滑构造体系和断裂角砾岩及热液蚀变岩,也很可能是成矿有利部位,值得今后找矿工作的关注.     

德兴地体成矿特征

从成矿条件、地球物理和地球化学特征等方面研究了德兴地体乐(华)-德(兴)成矿带的铜铅锌金银多金属五大矿田,指出了找矿方向.     

一个干旱地区毛矾石矿氧化带的矿物组合

在陆相古火山角砾岩筒中由火山热液蚀变产生的含黄铁矿次生石英岩中的硫化物,在特别干旱的条件下生成了以毛矾石及黄钾铁钒为主的13种钒类矿物组成的硫化矿床氧化带,并在其中聚集了毛矾石矿体。毛钒石矿是由反复进行的氧化-渗透淋滤作用而富集形成的。     

附有限制条件的间接平差秩亏时解法初探

在附有限制条件的间接平差的应用中,若所列观测方程中实际用到的未知参数的个数少于所选参数的总数u时,就会出现法方程系数阵秩亏的问题。为了解决此问题,在理论公式推导的基础上,给出了一种新的解决方法,并结合算例进行了验证。