Non‐local damage modelling of concrete: a procedure for the determination of model parameters

This paper presents a procedure for the determination of parameters of non‐local damage models. This is to assure a consistent response of a non‐local damage model, as choice of the internal length and other parameters of the model are varied. Correlations between the internal length and other parameters governing the local constitutive behaviour of the model are addressed and exploited. Focus is put on the relationship between the internal length of the non‐local model and the width of the fracture process zone. Numerical examples are used to demonstrate the rigour of the proposed method. Copyright © 2006 John Wiley & Sons, Ltd.     

Identifying parameters controlling soil delayed behaviour from laboratory and in situ pressuremeter testing

The aim of this paper is to present a methodology for identifying the soil parameters controlling the delayed behaviour from laboratory and in situ pressuremeter tests by using an elasto‐viscoplastic model (EVP‐MCC) based on Perzyna's overstress theory and on the elasto‐plastic Modified Cam Clay model. The influence of both the model parameters and the soil permeability was studied under the loading condition of pressuremeter tests by coupling the proposed model equations with Biot's consolidation theory. On the basis of the parametric study, a methodology for identifying model parameters and soil permeability by inverse analysis from three levels of constant strain rate pressuremeter tests was then proposed and applied on tests performed on natural Saint‐Herblain clay. The methodology was validated by comparing the optimized values of soil parameters and the values of the same parameters obtained from laboratory test results, and also by using the identified parameters to simulate other tests on the same samples. The analysis of the drainage condition and the strain rate effect during a pressuremeter test demonstrated the coupled influence of consolidation and viscous effects on the test results. The numerical results also showed that the inverse analysis procedure could successfully determine the parameters controlling the time‐dependent soil behaviour. Copyright © 2008 John Wiley & Sons, Ltd.     

OFDM基带处理系统的设计与实现

阐述了适合高速无线数据传输的正交频分复用(OFDM)调制方式的基本原理及调制解调的快速傅立叶变换(FFT)实现,并给出OFDM基带处理系统的结构图和硬件模块框图。     

高效分解水产原料的菌株分离鉴定和组合发酵初探

为从一种组成未知的商用复合菌中分离并筛选出优势发酵菌株,本实验采用稀释平板培养法,对菌种进行分离纯化,同时参照《真菌鉴定手册》和《常见细菌鉴定手册》,根据其形态学特征、生理生化特性,并分别结合16S r DNA和18S r DNA序列的比对分析对菌种进行鉴定。另外,本研究通过生长曲线测定,单菌种发酵试验以及多菌种混合发酵发酵试验,以游离氨基酸态氮为指标,以期筛选出发酵低值水产品制备菌肥的最佳菌株组合。结果显示,共分离得到4株菌,分别为a热带假丝酵母、b罗伦隐球菌、c枯草芽孢杆菌、d蜡样芽胞杆菌。且菌种组合acd发酵后游离氨基酸态氮的含量较对照组上升最显著,为8.276g/L。故可确定最佳发酵菌株配方为acd(热带假丝酵母+枯草芽孢杆菌+蜡样芽胞杆菌)。     

山东半岛北部滨浅海区表层沉积物铝物源鉴别

Surface sediment samples in the near shore area of the north Shandong Peninsula are collected for grain size and element analyses. The results indicate that the surface sediments in the study area are primarily composed of the silt-sized components similar to the Huanghe River. The total concentration of aluminum varies from 5.57% to7.37%(average(6.33 ± 0.40)%), and its spatial distribution is mainly controlled by the grain size. Correlations between the ratio of aluminum to titanium concentration and aluminum concentration, titanium concentration and the mean grain size indicate that aluminum in the near shore surface sediments is affected majorly by the terrigenous source, and partially by the anthropogenic source. The ratios of aluminum to titanium concentrations are larger than the background value of loess matter at some stations due to the existence of excess aluminum associated with human activities. Thus, the sources of aluminum should be identified firstly when aluminum is used as an index of terrigenous matter even in the near shore area dominated by terrigenous deposits.     

裂片石莼营养价值的评价及其多糖制备的初步研究

对采自福建的野生裂片石莼(Ulva fasciata)进行了分类学鉴定和营养价值评估;采用微波加热新方法,进一步研究了裂片石莼多糖提取工艺。研究结果表明,裂片石莼的总糖、粗蛋白质、总氨基酸和总脂含量分别为34.38%、27.60%、25.20%、11.70%;其必需氨基酸含量为10.0%,氨基酸比值系数分(SRC)=79.77;裂片石莼的重金属元素含量达到国家海藻制品的限量标准。研究结果还表明,通过正交实验优化微波加热提取工艺,与传统加热提取工艺相比,裂片石莼多糖的得率提高了21.35%,而耗能降低了58.51%。     

一株拮抗菌C-5 的分离及鉴定

针对目前海参养殖中水产微生态制剂品种单一、施用效果不稳定等现状,作者从地瓜参(Acaudina molpadioidea)肠道分离土著肠杆菌(Enterobacter),筛选到1株具有较好拮抗作用的海洋细菌C-5,该菌对副溶血弧菌(Vibrio parahaemolyticus)、溶藻弧菌(Vibrio alginolyticus)、杀鲑气单胞菌(Aeromonas salmonicida)等7种细菌有拮抗作用;通过形态观察、生理生化和16S rDNA基因序列分析鉴定为霍肠杆菌(Enterobacter hormaechei);通过卤虫(Artemia)和药敏实验检测该菌具有安全性,其对卤虫的72 h半致死浓度(LC50)为108cfu/m L,只对20种常规抗生素中的5种产生耐药性;对C-5的发酵条件进行优化,该菌优化后的发酵条件为:温度30℃,pH 7.0,盐度2%。结果表明,C-5有望作为一种益生菌应用于海水养殖病害控制。     

基于高清工业相机的盾构隧道裂缝智能识别算法分析

裂缝一直是隧道病害的重点检测对象,但传统人工巡检仅能通过肉眼发现后记录,人工识别精准度与效率完全取决于个人经验判断,无信息化手段辅助,作业效率识别精度亟待提升。针对以上问题,本文借助高清工业相机成像分辨率高、采集速度快等特点,将高清工业相机部署于轨道车上获取隧道表面裂缝病害信息,大幅提高了隧道裂缝识别效率,将识别精度提升至0.2 mm,同时融入优化的Cascade R-CNN算法,在有监督情况下训练隧道裂缝样本,最终实现了隧道裂缝病害的高效提取,同时研发了一套包含硬件数据采集、数据处理软件、数据管理平台的裂缝病害识别路线,真正意义上破除了识别慢、精度低、靠经验、难管理的技术壁垒。     

准噶尔盆地西北缘车排子凸起原油类型与油源

准噶尔盆地西北缘南部红车断裂带- 车排子凸起油气藏众多,原油物理化学性质和地球化学特征十分复杂,原油类型及其来源长期存在很大争议。本文在准噶尔盆地不同时代烃源岩生成原油典型地球化学特征与主要油源判识指标归纳总结的基础上,对红车断裂带- 车排子凸起原油地球化学特征和来源进行系统分析研究,将该区域原油分为五类,其中三类原油分别来源于二叠系湖相烃源岩、中—下侏罗统煤系烃源岩、古近系安集海河组湖相烃源岩,另外两类为混合原油,分别为来源于二叠系湖相烃源岩的生物降解稠油与中—下侏罗统煤系烃源岩生成的正常原油和古近系湖相烃源岩生成的正常原油的混合原油。红车断裂带石炭系—白垩系油藏原油主要来源于沙湾凹陷二叠系湖相烃源岩,车排子凸起东北部春风油田稠油来源于沙湾凹陷二叠系湖相烃源岩;车排子凸起东侧- 红车断裂带西侧新近系沙湾组油藏轻质原油来源于四棵树凹陷古近系湖相烃源岩;车排子凸起中部春光油田白垩系—古近系油藏稠油为二叠系来源稠油和侏罗系正常原油的混合原油,新近系沙湾组油藏稠油为二叠系来源稠油与新近系正常原油的混合原油;车排子凸起西部石炭系—古近系油藏轻质原油来源于四棵树凹陷中—下侏罗统煤系烃源岩,而新近系沙湾组油藏轻质原油来源于四棵树凹陷古近系湖相烃源岩。本文对准噶尔盆地西北缘南部地区油气藏成藏研究及区域油气勘探决策具有重要参考作用。     

方程误差系统的多新息辨识方法

多新息方法可以用于线性系统和非线性系统的自适应滤波、参数估计、自校正控制、自适应故障检测与诊断等.线性系统包括两种基本类型:方程误差类系统和输出误差类系统.本文将多新息辨识应用到方程误差滑动平均(EEMA)系统(即CARMA系统),研究多新息增广随机梯度算法和多新息增广最小二乘算法,应用到方程误差自回归滑动平均(EEARMA)系统(即CARARMA系统),提出基于分解的多新息广义增广随机梯度算法和基于分解的多新息广义增广最小二乘算法,以及基于滤波的多新息广义增广随机梯度算法和基于滤波的多新息广义增广最小二乘算法.