二三维联动的虚拟校园设计与实现

传统的2维地理信息系统技术成熟但缺乏3维可视化和分析的能力,而目前的3维地理信息系统发展可拥有3维可视化分析能力,然而还缺少2维地理信息系统的便捷。以二三维联动为开发思路的地理信息系统能够解决这对矛盾。本文基于二三维联动GIS的设计方案,以虚拟校园设计与实现为应用实例,利用ArcEngine（AE）实现二三维联动GIS系统的开发设计,对GIS系统的开发做出了一种新的、有益的尝试。     

红枫湖夏季分层期间pCO2分布规律的研究

在夏季分层期间对红枫湖南、北湖湖心的水样进行分层采集,同时测定了分层水样的温度、pH、HCO₃-浓度、溶解氧(DO)、叶绿素a(Chl-a)及铵根离子(NH₄+)、硝酸根离子(NO₃-)、磷酸根离子(PO₄3-)的浓度,水体中CO₂的分压(pCO₂)由化学平衡及亨利定律求得。研究结果表明:光合作用、有机质降解及水体热分层是影响红枫湖夏季pCO₂分布的主要因素。其中,温水层CO₂欠饱和是光合作用吸收CO₂引起的,温跃层中pCO₂的急剧增加是光合产物降解产生CO₂引起的。静水层沉积物附近pCO₂最高并且还有持续增加的趋势,说明沉积物中有机质降解是静水层中CO₂增加的主要原因,夏季湖底水温较高加快了沉积物中有机质的降解。分层现象使pCO₂在水体中的分布差别明显,并且使静水层中CO₂得到积累。此外,夏季红枫湖水体中pCO₂的变化与NH₄+、PO₄3-的变化密不可分,表现为温水层中光合作用消耗NH₄+、PO₄3-,有机质降解过程伴随NH₄+、PO₄3-的释放。     

下一代互联网协议（IPv6）的概念及原理

IPv6是下一代互联网采用的核心协议。本文介绍了IPv6技术发展背景、新特性、地址空间、地址格式、地址表示方法、地址类型、地址范围、IPv4到IPv6的过渡技术,以及在国土资源部的具体应用。     

Geochemical Eccentricity of Ground Water Allied to Weathering of Basalts from the Deccan Volcanic Province,India: Insinuation on CO<Subscript>2</Subscript> Consumption

Analyses of 72 samples from Upper Panjhara basin in the northern part of Deccan Plateau, India, indicate that geochemical incongruity of groundwater is largely a function of mineral composition of the basaltic lithology. Higher proportion of alkaline earth elements to total cations and HCO₃>Cl + SO₄ reflect weathering of primary silicates as chief source of ions. Inputs of Cl, SO₄, and NO₃ are related to rainfall and localized anthropogenic factors. Groundwater from recharge area representing Ca + Mg–HCO₃ type progressively evolves to Ca + Na–HCO₃ and Na–Ca–HCO₃ class along flow direction replicates the role of cation exchange and precipitation processes. While the post-monsoon chemistry is controlled by silicate mineral dissolution + cation exchange reactions, pre-monsoon variability is attributable chiefly to precipitation reactions + anthropogenic factors. Positive correlations between Mg vs HCO₃ and Ca + Mg vs HCO₃ supports selective dissolution of olivine and pyroxene as dominant process in post-monsoon followed by dissolution of plagioclase feldspar and secondary carbonates. The pre-monsoon data however, points toward the dissolution of plagioclase and precipitation of CaCO₃ supported by improved correlation coefficients between Na + Ca vs HCO₃ and negative correlation of Ca vs HCO₃, respectively. It is proposed that the eccentricity in the composition of groundwater from the Panjhara basin is a function of selective dissolution of olivine > pyroxene followed by plagioclase feldspar. The data suggest siallitization (L < R and R _k) as dominant mechanism of chemical weathering of basalts, stimulating monosiallitic (kaolinite) and bisiallitic (montmorillonite) products. The chemical denudation rates for Panjhara basin worked out separately for the ground and surface water component range from 6.98 to 36.65 tons/km²/yr, respectively. The values of the CO₂ consumption rates range between 0.18 × 10⁶ mol//km²/yr (groundwater) and 0.9 × 10⁶ mol/km²/yr (surface water), which indicates that the groundwater forms a considerable fraction of CO₂ consumption, an inference, that is, not taken into contemplation in most of the studies.     

Structural evolution of the Bayanhongor region, west-central Mongolia

Most of previous models suggest that the Central Asia Orogenic Belt grew southward in the Phanerozoic. However, in the Bayanhongor region in west-central Mongolia, volcanic arc, accretionary prism, ophiolite, and passive margin complexes accreted northeastward away from the Baydrag micro-continent, and hence the region constitutes the southwestern part of a crustal-scale syntaxis close to the west. The syntaxis should be original, because presumably reorientation due to strike-slip faulting can be ignored. It is reconfirmed that the Baydrag eventually collided with another micro-continent (the Hangai) to the northeast. A thick sedimentary basin developed along the southern passive margin of the Hangai micro-continent. This region is also characterized by an exhumed metamorphosed accretionary complex and a passive margin complex, which are both bounded by detachment faults as well as basal reverse faults which formed simultaneously as extrusion wedges. This part of the Central Asia Orogenic Belt lacks exhumed crystalline rocks as observed in the Himalayas and other major collisional orogenic belts. In addition, we identified two phases of deformation, which occurred at each phase of zonal accretion as D1 through Cambrian and Devonian, and a synchronous phase of final micro-continental collision of Devonian as D2. The pre-collisional ocean was wide enough to be characterized by a mid-ocean ridge and ocean islands. Two different structural trends of D1 and D2 are observed in accretionary complexes formed to the southwest of the late Cambrian mid-ocean ridge. That is, the relative plate motions on both sides of the mid-ocean ridge were different. Accretionary complexes and passive margin sediments to the northeast of the mid-ocean ridge also experienced two periods of deformation but show the same structural trend. Unmetamorphosed cover sediments on the accretionary prism and on the Hangai micro-continent experienced only the D2 event due to micro-continental collision. These unmetamorphosed sediments form the hanging walls of the detachment faults. Moreover, they were at least partly derived from an active volcanic arc formed at the margin of the Baydrag micro-continent.     

The Glueckstadt Graben of the North-German Basin: new insights into the structure from 3D and 2D gravity analyses

The structure of the Glueckstadt Graben has been investigated by use of 3D gravity backstripping technique and by 2D gravity and magnetic modelling. Subtracting the gravity effects of the Meso-Cenozoic sediments together with Permian salt reveals a positive residual anomaly within the Glueckstadt Graben. This anomaly includes two local maxima over the Westholstein and Eastholstein Troughs. The 2D gravity models point to the presence of a high-density body within the lower crust of the Glueckstadt Graben. In addition, the results of 2D magnetic modelling indicate that the central part of the high-density body is overlain by an area with high susceptibility. Most probable, the formation of this high-density body is a result of complex poly-phase tectonic history of the study area. Finally, the results of gravity modelling indicate that Permian salt is not homogeneous. 3D gravity analysis and, especially, 2D gravity modelling have distinguished the differences in degree of salt saturation in salt-rich bodies, and elucidate the proportion of Rotliegend salt.     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

鄂尔多斯盆地西南部上三叠统延长组长8、长6油层组 的沉积体系与物源方向

野外露头剖面的岩石学与岩相组合,沉积特征与相标志,古流向测定,室内砂岩的骨架矿物、重矿物组合及其平面分布规律的研究结果表明：鄂尔多斯盆地西南部上三叠统延长组长8油层组是以线状或点状物源为特征的一套近源快速堆积的冲积扇与扇三角洲沉积体系,形成于盆地由快速拗陷转入逆冲负荷沉降期间。长8沉积期盆地西南部的古水流与物源主要来自盆地西南方向,其次为西北和东南方向。长6油层组沉积期,盆地内部底床下沉作用减缓,湖盆开始收缩,湖盆西岸除北部有少量扇三角洲沉积外,主要为辫状河三角洲沉积：而盆地东北部与东部的沉积作用大大加强,致使在盆地东部形成一系列大型曲流河三角洲沉积体系,至盆地西南部相变为半深湖-深湖相与浊流相沉积。长6沉积期古水流除来自西南、西北和东南方向外．还有来自北东和正东方向的次要物源,它们在盆地西南部悦乐-玄马-板桥-固城-合水-带汇合,使该地带成为混合物源区。     

陕西关中盆地中部地下热水H、O同位素交换 及其影响因素

对关中盆地地下热水δ＆18O和8D数据的研究表明：盆地中部西安、咸阳深部的地压地热流体发生明显的δ^18O同位素交换,并出现^2H同位素交换,表明热储流体发生了强烈的水岩反应,盆地周边及中部的非地压地热流体^18O交换则不明显。根据研究区^18O同位素的交换程度（用^2H过量参数d表征）和水化学资料,可将关中盆地热储流体分为循环型和封闭型热储流体2类。地热水埋深越大、滞留时间越长、TDS和温度越高、地质环境越封闭,18^O交换程度就越大。西安和咸阳地下热水分属于不同的地热系统,具有不同的补给来源。     

测井仪器的故障分析与排除思路

TYSC-3Q与PSJ-2型数字测井仪是目前煤田测井中常用的二种测井仪器,在使用过程中难免发生诸如测井控制故障、声速探管故障、密度三侧向探管故障、井温、井液电阻率探管故障、电法面板故障、数字测井面板故障、电测井故障等常见故障类型。通过对各类故障因素进行剖析,指出了故障易发生的部位,并详细的介绍了检查的方法及故障的排除步骤。