Fractally Invariant Distributions and an Application in Geochemical Exploration

Fractal modelling has been applied extensively as a means of characterizing the spatial distribution of geological phenomena that display self-similarity at differing scales of measurement. A fractal distribution exists where the number of objects exhibiting values larger than a specified magnitude displays a power-law dependence on that magnitude, and where this relationship is scale-invariant. This paper shows that a number of distributions, including power-function, Pareto, log-normal and Zipf, display fractal properties under certain conditions and that this may be used as the mathematical basis for developing fractal models for data exhibiting such distributions. Population limits, derived from fractal modelling using a summation method, are compared with those derived from more conventional probability plot modelling of stream sediment geochemical data from north-eastern New South Wales. Despite some degree of subjectivity in determining the number of populations to use in the models, both the fractal and probability plot modelling have assisted in isolating anomalous observations in the geochemical data related to the occurrence of mineralisation or lithological differences between sub-catchments. Thresholds for the main background populations determined by the fractal model are similar to those established using probability plot modelling, however the summation method displays less capacity to separate out anomalous populations, especially where such populations display extensive overlap. This suggests, in the geochemical data example provided, that subtle differences in the population parameters may not significantly alter the fractal dimension.     

Detection and 2d modelling of cavities using pole–dipole array

The resistivity method is often used in cave prospecting. In this paper the pole–dipole array ability to detect cavities at different depths and with different water contents is investigated. The research was performed using analogical and numerical modelling. According to the results, empty caves at a depth less than four times its diameter can be easily detected. The ability of the pole–dipole array to detect water-filled caves reaches a minimum at filling percentages of 30–50%. Overburden effects research shows that low resistivity overburden reduces the resolution capability of the array. This study shows that equivalent results can be obtained by modelling the empty caves as infinite resistivity bodies or, alternatively, as very high resistivity ones. The analysis of field data acquired in the Maciço Calcário Estremenho (Portugal) shows the practical importance of the pole–dipole array in cavities prospecting.     

锚杆支护及在高承压水土层基坑中的应用

在邻海地区富含高承压水的土层中施工预应力锚杆支护工程的难度很大.介绍了锚杆的构造、作用机理、施工工艺以及决定锚杆施工质量的关键技术.以深圳某商住楼基坑施工为例,探讨了在承压水土层中采用锚杆支护的方法,创造性地提出了"先堵水后注浆"的施工工艺,可供沿海、沿江地区的类似工程借鉴.     

三峡库区巫山县城新址岩质库岸再造预测

巫山县城新址位于西坪和大宁河两岸.组成该库段的基岩主要为泥岩、粉砂岩、泥灰岩等,岩性较软弱,且地质构造变动强烈,褶皱、断裂发育,岩层破碎,崩塌、滑坡分布较多,库岸再造问题严重;同时,岸坡再造又严重影响着新县城的规划和库岸的防护.因此把稳态坡形类比法应用于巫山县城新址基岩岸坡的再造预测,定量预测库岸的最终再造宽度,以指导新城的规划与建设.     

沉管灌注桩大面积断桩原因分析

通过2个工程实例分析了沉管灌注桩出现大面积断桩的原因是由于后期基坑开挖不当造成的，并提出了预防断桩出现的一些措施以及对断桩的处理补救措施。     

云南沿边境地带生态环境3S监测、 评价与调控研究

本文利用全球新千年整体生态系统评估的理论，以云南省沿边境地带生态系统变化跨境生态安全为研究对象，探寻并揭示我国陆疆系统的跨境生态系统变化监测、评价和生态安全综合调控的基础理论与信息机理；进而研究基于“3S”云南沿边境地带的生态环境监测、评价与综合调控的方法和关键技术，包括方法和技术体系的建立、指标体系的建立、多尺度效应和尺度转换、数学模型的建立、综合调控模式和决策方案的建立等；在案例研究部分，建立了背景数据库，然后选择大、中、小尺度进行了全区生态环境现状评价，重点河道、典型路段和重点口岸的影响评价和预测预报研究，最后进行了综合调控模式和方案的探讨，并对研究结果进行了动态仿真和虚拟表达研究。     

黄土区人类活动影响下的 产汇流模拟研究

日益频繁的人类活动改变了流域下垫面条件,对流域产汇流产生很大的影响。本文以黄河中游典型支流岔巴沟为研究区域,提出利用基于DEM的分布式水文模拟技术,探讨流域人类活动过程中的产汇流模拟,避免了经验公式的概化和由此引起的局限。模拟的结果证实了该方法的可行性。采用网格滞蓄的方法可以在子网格上体现人类活动引起的下垫面的变化及其对产汇流的影响,反映各个时期的产汇流条件,对降雨做出合理响应。     

273.15K下LiCl-Li2B4O7-H2O体系热力学性质的等压研究

用等压法研究了273 15K下LiCl-Li2B4O7-H2O体系中纯盐水溶液(离子强度范围为LiCl0 2046～2 5055mol·kg-1,Li2B4O70 1295～0 3700mol·kg-1)以及混合盐水溶液(离子强度范围为0 0931～2 4911mol·kg-1)渗透系数和水活度;计算了LiCl-Li2B4O7-H2O体系的饱和蒸汽压,获得饱和蒸汽压、渗透系数随离子强度的变化规律。用实验数据以最小二乘法求取了LiCl和Li2B4O7纯盐参数及体系的混合盐参数,拟合的标准偏差分别为0 0077和0 026。用该模型计算的渗透系数值与实验结果取得合理的一致。同时研究结果与273 15K下LiCl-Li2SO4-H2O体系的渗透系数随离子强度变化的规律作了比较。本研究对完善低温下含锂、硼盐湖卤水体系的热力学模型和盐湖资源的综合开发利用具有重要意义。     

用叠加谱比法研究新疆地区Lg尾波Q值的区域性变化

运用叠加谱比法,对分布于新疆地区的5个台站所记录的51个地震数据进行分析,得出与各射线路径相对应的Lg尾波Q0(Lg尾波在1Hz处的Q)值。结果表明:Q0值呈现出明显的区域性变化特点,与构造活动关系紧密。在较为稳定的塔里木地台,Q0呈现出高值,在350～450之间。在南部构造活动较为激烈的昆仑褶皱系,Q0呈现出较低的值,约为200～250。在构造活动最为激烈的帕米尔地区,Q0值在170～200之间。在北部的天山褶皱系,Q0值约为220～270。准葛尔褶皱系比天山褶皱系的Q0值略高,约为260～290。     

Refined modeling and movement characteristics analyses of irregularly shaped particles

Irregularly shaped (IRS) particles widely exist in many engineering and industrial fields. The macro physical and mechanical properties of the particle system are governed by the interaction between the particles in the system. The interaction between IRS particles is more complicated because of their complex geometric shape with extremely irregular and co‐existed concave and convex surfaces. These particles may interlock each other, making the sliding and friction of IRS particles more complex than that of particles with regular shape. In order to study the interaction of IRS particles more efficiently, a refined method of constructing discrete element model based on computed tomography scanning of IRS particles is proposed. Three parameters were introduced to control the accuracy and the number of packing spheres. Subsequently, the inertia tensor of the IRS particle model was optimized. Finally, laboratory and numerical open bottom cylinder tests were carried out to verify the refined modeling method. The influence of particle shape, particle position, and mesoscopic friction coefficient on the interaction of particles was also simulated. It is noteworthy that with the increase of mesoscopic friction coefficient, the fluidity of IRS particle assembly decreases, and intermittent limit equilibrium state may appear. Copyright © 2014 John Wiley & Sons, Ltd.