Mesozoic-Cenozoic tectonics and geodynamics of Altai, Tien Shan, and Northern Kazakhstan, from apatite fission-track data

Apatite fission-track (AFT) thermochronological modeling as a diagnostic tool for periods of stability (peneplanation) and tectonic activity (orogeny) has been broadly used in tectonic studies of Central Asia in recent years. We discuss more than 100 AFT ages of samples from the Kyrgyz Tien Shan and Altai and compare them with AFT data from northern Kazakhstan. Geological, geomorphological, and AFT data indicate intense activity in the Late Cenozoic Eurasian continental interior. The impact from the India-Eurasia collision on the northern Tien Shan, Altai, and northern Kazakhstan regions showed up at 11, 5, and 3 Ma, respectively, as a result of stress propagation into the continent, with the ensuing reactivation and mountain growth. We hypothesize that a distant effect of the Late Cenozoic India-Eurasia collision was to rejuvenate Paleozoic fault zones and to deform the Mesozoic sedimentary cover north of the collision front as far as the West Siberian Plate. The reactivation facilitated formation of tectonic oil and gas traps. The activity in northern Central Asia under the effect of the Indian indentation into Eurasia appears to continue and may evolve to include uplift of southern West Siberian plate with uplift.     

山西省基础地理信息数据库的技术研究

山西省基础地理信息数据库是山西省空间数据基础设施建设的重要组成部分,主要介绍数据库建设的技术方案和关键技术.     

Numerical simulation of migration–accumulation of oil resources

Numerical simulation of oil migration and accumulation is to describe the history of oil migration and accumulation in basin evolution. It is of great value to the evaluation of oil resources and to the determination of the location and amount of oil deposits. This thesis discusses the characteristics of petroleum geology and permeation fluid mechanics. For the three-dimensional problems of Dongying hollow of Shengli Petroleum Oil Field, it puts forward a new model and a kind of modified method of upwind finite difference fractional steps implicit interactive scheme. For the famous hydraulic experiment of secondary migration–accumulation, the numerical simulation test has been done, and both the computational and experimental results are basically identical. For the actual problem of Dongying hollow, the numerical simulation test and the actual conditions are basically coincident. Thus, the well-known problem has been solved.     

应用生烃动力学法研究川东上二叠统烃源岩生烃史

现今川东上二叠统烃源岩生烃史研究具有局限性.首先,没有对上二叠统Ⅰ-Ⅱ1型灰岩生油、Ⅲ型泥岩的生气史分开评价;其次,海相镜质组反射率通过拟合公式换算成镜质体反射率评价烃源岩成熟度具有局限性.针对上述不足,笔者通过热模拟实验,利用化学动力学方法,标定出两类源岩生油、生气的动力学参数,并结合川东地区的埋藏史及热史,模拟出源岩有机质的成烃转化率曲线.研究表明:上二叠统灰岩、泥岩有机质在距今200 Ma和190 Ma分别进入了生油、生气门限,而在距今170 Ma和140 Ma生烃结束.     

Cretaceous isochron ages from K–Ar and Ar / Ar dating of eclogitic rocks in the Tso Morari Complex, western Himalaya, India

The Tso Morari Complex, which is thought to be originally the margin of the Indian continent, is composed of pelitic gneisses and schists including mafic rock lenses (eclogites and basic schists). Eclogites studied here have the mineral assemblage Grt + Omp + Ca-Amp + Zo + Phn + Pg + Qtz + Rt. They also have coesite pseudomorph in garnet and quartz rods in omphacite, suggesting a record of ultrahigh-pressure metamorphism. They occur only in the cores of meter-scale mafic rock lenses intercalated with the pelitic schists. Small mafic lenses and the rim parts of large lenses have been strongly deformed to form the foliation parallel to that of the pelitic schists and show the mineral assemblages of upper greenschist to amphibolite facies metamorphism. The garnet–omphacite thermometry and the univariant reaction relations for jadeite formation give 13–21 kbar at 600 °C and 16–18 kbar at 750 °C for the eclogite formation using the jadeite content of clinopyroxene (X_Jd = 0.48).

Phengites in pelitic schists show variable Si / Al and Na / K ratios among grains as well as within single grains, and give K–Ar ages of 50–87 Ma. The pelitic schist with paragonite and phengite yielded K–Ar ages of 83.5 Ma (K = 4.9 wt.%) for paragonite–phengite mixture and 85.3 Ma (K = 7.8 wt.%) for phengite and an isochron age of 91 ± 13 Ma from the two dataset. The eclogite gives a plateau age of 132 Ma in Ar/Ar step-heating analyses using single phengite grain and an inverse isochron age of 130 ± 39 Ma with an initial ⁴⁰Ar / ³⁶Ar ratio of 434 ± 90 in Ar/Ar spot analyses of phengites and paragonites. The Cretaceous isochron ages are interpreted to represent the timing of early stage of exhumation of the eclogitic rocks assuming revised high closure temperature (500 °C) for phengite K–Ar system. The phengites in pelitic schists have experienced retrograde reaction which modified their chemistry during intense deformation associated with the exhumation of these rocks with the release of significant radiogenic ⁴⁰Ar from the crystals. The argon release took place in the schists that experienced the retrogression to upper greenschist facies metamorphisms from the eclogite facies conditions.     

Primary volcanic structures from a type section of Deccan Trap flows around Narsingpur-Harrai-Amarwara, central India: Implications for cooling history

Field investigations of the Deccan Trap lava sequence along a 70 km traverse in the Narsingpur-Harrai-Amarwara area of central India indicate twenty lava flows comprising a total thickness of around 480 m. Primary volcanic structures like vesicles and cooling joints are conspicuous in this volcanic succession and are used to divide individual flows into three well-defined zones namely the lower colonnade zone, entablature zone, and the upper colonnade zone. The variable nature of these structural zones is used for identification and correlation of lava flows in the field. For twenty lava flows, the thicknesses of upper colonnade zones of eight flows are ∼5 m while those of eight other flows are ∼8 m each. The thicknesses of upper colonnade zones of remaining four flows could not be measured in the field. Using the thicknesses of these upper colonnade zones and standard temperature-flow thickness-cooling time profiles for lava pile, the total cooling time of these sixteen Deccan Trap lava flows has been estimated at 12 to 15 years.     

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.     

Fission track evidence for the Mesozoic Cenozoic tectonic uplift of Mt. Bogda, Xinjiang, Northwest China

1 IntroductionThe Mesozoic-Cenozoic tectonic evolution and ki-netics mechanism of the intracontinental orogen are thekey subjects of continental dynamics (Ma Zongjin andGao Xianglin, 2004) and the key to understanding theregional geological tectonics (Qia…