多旋翼无人机航磁系统误差综合补偿研究

多旋翼无人机磁通门航磁系统以其安全、稳定、高效等特点可广泛应用于中大比例尺矿产资源探测领域,但由于磁通门传感器存在三轴不严格正交,灵敏度、零偏不一致造成的转向差,且系统作业中存在固定场干扰、感应干扰和涡流干扰,需要进行流程繁琐的标定和补偿测试.本文根据实测数据分析出航磁系统机电干扰主要来自机载设备高频干扰,针对机电干扰高频特性设计相应低通滤波器进行误差处理,并基于Tolles-Lawson模型建立仪器转向误差和飞行平台机动误差补偿模型,根据两者结构相似的特点,建立综合补偿模型,该模型简单,实用性强,可通过野外一次补偿测试求取补偿参数进而对工区航磁数据进行补偿处理.最后,将综合补偿研究应用到辽宁省兴城市夹山地区航磁数据,综合补偿后的处理有效去除了航磁数据中的条带状干扰异常,并与地面磁测数据异常形态具有良好的一致性,验证了该研究方法有效性和实用性.     

基于断层滑动数据古应力反演的影响因素及其误差分析

古构造应力场是构造动力学研究中的一个重要内容,且断层滑动数据古应力反演已经成为古构造应力场恢复研究中比较常用的重要方法之一。近年来,断层滑动数据古应力反演方法研究和应用取得了一系列重要进展,但有关反演结果的解释仍存歧义,反演结果的影响因素及其误差范围等并未得到深入研究与定量分析。本文总结指出,影响断层滑动数据古应力反演结果的主要因素包括变形体制、剪切破裂面类型、断层面的形态以及地质体内薄弱面的存在等。在此基础上,分别对新生断层和先存薄弱面滑动数据的古应力反演综合误差进行了定量分析。研究指出,在可以大致厘定变形体制或误差在允许范围内的前提下,将断层滑动数据反演结果解释为应力状态是合理可行的。各种因素导致的反演误差定量分析表明,同一期构造应力场形成的破裂面滑动数据的古应力方位反演误差最大不超过35°。换言之,在没有证据表明存在不同期次的应力作用情况下,主应力方位变化小于35° 的应力状态,可以划归同一期应力场。     

基于MODIS数据地表温度反演劈窗算法的比较研究

选取QIN和SOB两种代表性劈窗算法对辽宁地区地表温度进行反演,并分析二者的精度和误差分布。结果表明：QIN和SOB算法反演的地表温度（TS）与地面气象台站准同步观测的气温和地温的线性拟合显著,SOB算法线性拟合更好;从误差分布直方图上看,两种算法的反演结果与地温更接近,SOB算法与同步气温和地温在±2 ℃之间的误差比例略高于QIN算法;在野外开展与卫星遥感空间尺度一致的地表温度观测试验,QIN和SOB算法与实测值的平均绝对误差均为1.5 ℃;与NASA官网发布的地表温度产品对比发现,QIN和SOB算法的平均绝对误差分别为1.75 ℃、1.70 ℃;因此QIN、SOB算法在辽宁地区均适用,SOB算法误差更小。     

基于遥感水边线的潮滩面积提取方法研究

潮滩作为动态变化的后备土地资源,对其研究具有重要意义。文章以江苏省如东县为研究区,使用环境资源卫星(HJ1A/1B)影像为数据源,应用面向对象技术创建分类规则,实现批量半自动提取水边线,随后利用DSAS软件处理水边线集获得潮位点集,基于最外边界法实现高(低)潮位点的提取,进而获得潮滩范围,估算的如东县潮滩面积为55 182hm~2。最后利用误差矩阵进行精度验证(Kappa系数为0.945)。结果表明:该方法对于潮滩面积提取具有适用性,无论在空间域还是时间域都具有一定的推广性。     

Rice Husk Ash as a Low Cost Adsorbent for the Removal of Methylene Blue and Congo Red in Aqueous Phases

Adsorption is of significant importance for effluent treatment, especially for the treatment of colored effluent generated from the dyeing and bleaching industries. Low cost adsorbents have gained attention over the decades as a means of achieving very high removal efficiencies to meet effluent discharge standards. The present article reports on batch investigations for color removal from aqueous solutions of Methylene Blue (MB) and Congo Red (CR) using Rice Husk Ash (RHA) as an alternative low cost adsorbent. The performance analysis was carried out as a function of various operating parameters, such as initial concentration of dye, adsorbent dose, contact time, shaker speed, interruption of shaking and ionic concentration. Performance studies revealed that a very high percentage removal of color was achievable for both dyes. The maximum percentage removal of MB was 99.939%, while 98.835% removal was observed for CR. These percentage removals were better than existing systems. Detailed data analysis indicated that adsorption of MB followed the Temkin isotherm, while CR followed the Freundlich isotherm. These isotherms were feasible within the framework of experimentation. Batch kinetic data, on the other hand, indicated that pseudo second order kinetics governed adsorption in both cases. Sensitivity analysis further indicated that the effects of initial dye concentration, shaker speed, pH and ionic strength had no noticeable effect on the percentage dye removal at equilibrium. Batch desorption studies revealed that 50% acetone solution was optimum for CR, while desorption of MB varied directly with acetone concentration.     

Improving the assessment of ICESat water altimetry accuracy accounting for autocorrelation

Given that water resources are scarce and are strained by competing demands, it has become crucial to develop and improve techniques to observe the temporal and spatial variations in the inland water volume. Due to the lack of data and the heterogeneity of water level stations, remote sensing, and especially altimetry from space, appear as complementary techniques for water level monitoring. In addition to spatial resolution and sampling rates in space or time, one of the most relevant criteria for satellite altimetry on inland water is the accuracy of the elevation data. Here, the accuracy of ICESat LIDAR altimetry product is assessed over the Great Lakes in North America. The accuracy assessment method used in this paper emphasizes on autocorrelation in high temporal frequency ICESat measurements. It also considers uncertainties resulting from both in situ lake level reference data. A probabilistic upscaling process was developed. This process is based on several successive ICESat shots averaged in a spatial transect accounting for autocorrelation between successive shots. The method also applies pre-processing of the ICESat data with saturation correction of ICESat waveforms, spatial filtering to avoid measurement disturbance from the land–water transition effects on waveform saturation and data selection to avoid trends in water elevations across space. Initially this paper analyzes 237 collected ICESat transects, consistent with the available hydrometric ground stations for four of the Great Lakes. By adapting a geostatistical framework, a high frequency autocorrelation between successive shot elevation values was observed and then modeled for 45% of the 237 transects. The modeled autocorrelation was therefore used to estimate water elevations at the transect scale and the resulting uncertainty for the 117 transects without trend. This uncertainty was 8 times greater than the usual computed uncertainty, when no temporal correlation is taken into account. This temporal correlation, corresponding to approximately 11 consecutive ICESat shots, could be linked to low transmitted ICESat GLAS energy and to poor weather conditions. Assuming Gaussian uncertainties for both reference data and ICESat data upscaled at the transect scale, we derived GLAS deviations statistics by averaging the results at station and lake scales. An overall bias of −4.6 cm (underestimation) and an overall standard deviation of 11.6 cm were computed for all lakes. Results demonstrated the relevance of taking autocorrelation into account in satellite data uncertainty assesment.     

酸雨观测异常数据的试验分析和处理方法

本文就酸雨观测仪器在测量操作中出现的异常状态进行了试验和分析,且对校错电极常数、测温系统故障、"后测K值"3种异常状态, 结合酸雨观测业务实践进行了试验、分析和讨论。推导出校错电极常数的电导率订正公式;制定了仪器测温系统故障的应急观测方案;指出"后测K值"会导致数据严重失真, 测量中必须严格遵循 "先测K值"规程;并建议在《酸雨观测业务规范》修订时, 增加本文有关的分析和处理方法。     

基于Monte Carlo方法的由GPS观测计算地应变率的误差分析

在利用GPS观测计算地应变率中,应变率的误差分布在地球动力学研究中非常重要. 为解决这一问题,文中提出基于Monte Carlo技术,利用GPS观测的速度计算地应变率进行误差分析的方法;以青藏高原地区为例,利用带有误差的GPS观测数据进行了大量、独立的应变率重复计算,然后运用统计方法给出了应变率分量及其误差的分布. 结果显示青藏高原的喜马拉雅及中东部地区地应变率的东西向、南北向及剪应变率分量的误差相对较大,但整个青藏高原及附近地区应变率结果稳定可靠;研究结果进一步表明,由GPS观测计算应变率的误差主要决定于GPS观测速度的误差, 在变形小的区域（如中国东部地区）,目前GPS的观测精度还不能完全满足地应变率计算的要求.     

圆度误差的优化计算

提出了一种能求出满足“最小区域”圆度误差的优化计算方法，编程进行了大量的实例计算。     

利用解析法有效快速估计将来GRACE Follow-On地球重力场的精度

本文首次利用解析法有效快速估计了将来GRACE（Gravity Recovery and Climate Experiment） Follow-On地球重力场的精度. 第一,基于功率谱原理分别建立了新的GRACE Follow-On卫星激光干涉星间测量系统星间速度、GPS接收机轨道位置和轨道速度以及加速度计非保守力误差影响累计大地水准面的单独和联合解析误差模型. 第二,利用提出的GRACE卫星关键载荷匹配精度指标和美国喷气推进实验室（JPL）公布的GRACE Level 1B实测精度指标的一致性,以及估计的GRACE累计大地水准面精度和德国波兹坦地学研究中心（GFZ）公布的EIGEN-GRACE02S地球重力场模型实测精度的符合性,验证了本文建立的解析误差模型是可靠的. 第三,论证了GRACE Follow-On卫星不同关键载荷匹配精度指标和轨道高度对地球重力场精度的影响. 在360阶处,利用轨道高度250 km、星间距离50 km、星间速度误差1×10^-9m/s、轨道位置误差3×10^-5m、轨道速度误差3×10^-8m/s和非保守力误差3×10^-13m/s²,基于联合解析误差模型估计累计大地水准面的精度为1.231×10^-1 m. 本文的研究不仅为当前GRACE和将来GRACE Follow-On地球重力场精度的有效快速确定提供了理论基础和计算保证,同时对国际将来GRAIL（Gravity Recovery and Interior Laboratory）月球卫星重力测量计划的成功实施具有重要的参考意义.