A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.     

中国首例铁氧化物-铜-金-铀-稀土型矿床的厘定及其成矿演化

通过对拉拉矿床物共生组合、矿物生成顺序、矿石特征的研究，发现其矿石物以磁铁矿为主，铁和铜的硫化物次之，并含有大量稀土矿物和自然金。拉拉矿床至少经历了两期成矿作用：早期为区域变质成矿作用，晚期为热液成矿作用。早期形成Fe-REE-P矿化，晚期为Cu-Mo-Au-Co-(U)矿化。根据这些特征，首次指出该矿床属于铁氧化物-铜-金-铀-稀土型矿床，而不是以往所称的块状硫化物型铜矿。     

Facies architecture of a submarine fan channel–levee complex: the Juniper Ridge Conglomerate, Coalinga, California

The Upper Cretaceous Juniper Ridge Conglomerate (JRC) near Coalinga, California, provides a rare, high-quality exposure of a submarine channel to overbank transition. The facies architecture of the JRC comprises a thick, predominantly mudstone sequence overlain by a channellized conglomerate package. Conglomeratic bounding surfaces truncate successions of interbedded turbiditic sandstones and mudstones both vertically and laterally. Thick-bedded, massive sandstones are interbedded with conglomerates. Facies architecture, palaeocurrent indicators, slump features, sandstone percentages and sandstone bed thickness trends lead to the interpretation that these elements comprise channel and overbank facies. A vertical sequence with conglomerate at the base, followed by thick-bedded sandstone, and capped by interbedded turbiditic sandstone and mudstone form a fining-upward lithofacies association that is interpreted as a single channel-fill/overbank system. Three similar lithofacies associations can be related to autocyclic processes of thalweg migration and submarine fan aggradation or to allocyclically driven changes in sediment calibre.     

Geochemical stream sediment survey in Winder Valley, Balochistan, Pakistan

A pilot scale geochemical survey of sediments from the Winder Stream (SW Pakistan) and its tributaries was carried out. The Winder Stream mainly receives sediment from the southern extensions of the Mor and Pab Ranges in the District of Lasbela (Balochistan). In these two mountain ranges, rocks from Jurassic to Cretaceous age are exposed. Rocks of the Ferozabad Group comprise of carbonates and siliciclastics of Lower–Middle Jurassic age and occupy the dominant part of the Mor Range. These strata host syngenetic and epigenetic Zn–Pb–Ba mineralizations of Stratiform Sediment-Hosted (SSH) and Mississippi Valley Type (MVT) deposits.Quantitative estimates of mobile and immobile elements were made from active stream sediments of the Winder stream and its tributaries. The samples were analyzed for Ag, Zn, Pb, Cu, Ni, Co, V, Mn, Fe and Ba using atomic absorption spectroscopy. The abundance of these elements is discussed in relation to local geological conditions such as bedrock, climate, weathering, mobility and pH of the dispersing waters. A number of Zn anomalies have been distinguished in the study area. Kharrari (Zn, 360 ppm), Sand (Zn, 340 ppm) and Draber (Zn, 210 ppm) are demarcated as new areas for Zn mineralization. The present study also indicates prospects of Ag, Cu and V in the rocks of the Mor Range.Relationships between various elements have been identified from scattergrams and reflect genetic associations. Whereby the positive correlation between Cu–Zn (0.55, n=18) and Cu–Pb (0.63) is related to possible sulphide mineralization.     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.     

Timing of Fracture Formation and Duration of Mineralization at the Hishikari Deposit, Southern Kyushu, Japan

Abstract. The Hishikari epithermal gold deposit consists of the Honko-Sanjin zone and Yamada zone. On the basis of observed crosscutting relationships of veins, vein system in the Hishikari deposit was classified into the early and late veins. They differ from orientation, width, control by unconformity, the amount of displacement and structural features, but have similarity in gold grade and Au/Ag ratios. K-Ar ages are presented for the classified veins to clarify timing of fracturing and duration of mineralization.
Age determination revealed that the early veins in the Honko-Sanjin zone range from 0.86 to 1.11 Ma and that the late veins range from 0.73 to 0. 84 Ma. The economically most important mineralization in the Hishikari deposit occurred around 0.90 Ma in a very short period (about 0.05 million years).
The distribution of mineralization age in the whole Hishikari deposit, occurrences of slickensides and ground water temperatures imply that mineralization lasted longer in the southern part of the deposit. As compared the early veins with late veins, structural changes including width, strike, dip and vein characteristics occurred at around 0.85 Ma.     

Hydrogeochemistry of the Simav geothermal field, western Anatolia, Turkey

Thermal waters hosted by Menderes metamorphic rocks emerge along fault lineaments in the Simav geothermal area. Thermal springs and drilled wells are located in the Eynal, Çitgöl and Na a locations, which are part of the Simav geothermal field. Studies were carried out to obtain the main chemical and physical characteristics of thermal waters. These waters are used for heating of residences and greenhouses and for balneological purposes. Bottom temperatures of the drilled wells reach 163°C with total dissolved solids around 2225 mg/kg. Surface temperatures of thermal springs vary between 51°C and 90°C. All the thermal waters belong to Na–HCO₃–SO₄ facies. The cold groundwaters are Ca–Mg–HCO₃ type. Dissolution of host rock and ion-exchange reactions in the reservoir of the geothermal system shift the Ca–Mg–HCO₃ type cold groundwaters to the Na–HCO₃–SO₄ type thermal waters. Thermal waters are oversaturated at discharge temperatures for aragonite, calcite, quartz, chalcedony, magnesite and dolomite minerals giving rise to a carbonate-rich scale. Gypsum and anhydrite minerals are undersaturated with all of the thermal waters. Boiling during ascent of the thermal fluids produces steam and liquid waters resulting in an increase of the concentrations of the constituents in discharge waters. Steam fraction, y, of the thermal waters of which temperatures are above 100°C is between 0.075 and 0.119. Reservoir pH is much lower than pH measured in the liquid phase separated at atmospheric conditions, since the latter experienced heavy loss of acid gases, mainly CO₂. Assessment of the various empirical chemical geothermometers and geochemical modelling suggest that reservoir temperatures vary between 175°C and 200°C.     

The 3D simulation and optimized management model of groundwater systems based on eco-environmental water demand

Through the study of mutual process between groundwater systems and eco-environmental water demand, the eco-environmental water demand is brought into groundwater systems model as the important water consumption item and unification of groundwater’s economic, environmental and ecological functions were taken into account. Based on eco-environmental water demand at Da’an in Jilin province, a three-dimensional simulation and optimized management model of groundwater systems was established. All water balance components of groundwater systems in 1998 and 1999 were simulated with this model and the best optimal exploitation scheme of groundwater systems in 2000 was determined, so that groundwater resource was efficiently utilized and good economic, ecologic and social benefits were obtained.     

On the spatial relationship between landslides and causative factors on Lantau Island, Hong Kong

This paper presents a statistical approach to study the spatial relationship between landslides and their causative factors at the regional level. The approach is based on digital databases, and incorporates such methods as statistics, spatial pattern analysis, and interactive mapping. Firstly, the authors propose an object-oriented conceptual model for describing a landslide event, and a combined database of landslides and environmental factors is constructed by integrating the various databases within such a conceptual framework. The statistical histogram, spatial overlay, and dynamic mapping methods are linked together to interactively evaluate the spatial pattern of the relationship between landslides and their causative factors. A case study of an extreme event in 1993 on Lantau Island indicates that rainfall intensity and the migration of the center of the rainstorm greatly influence the occurrence of landslides on Lantau Island. A regional difference in the relationship between landslides and topography is identified. Most of the landslides in the middle and western parts of the island occurred on slopes with slope angles of 25–35°, while in the eastern part, the corresponding range is 30–35°. Overlaying landslide data with land cover reveals that a large number of landslides occurred in the bareland and shrub-covered area, and in the transition zones between different vegetation types. The proposed approach can be used not only to analyze the general characteristics of such a relationship, but also to depict its spatial distribution and variation, thereby providing a sound basis for regional landslide prediction.     

Issues of Globalization and Reflexivity in the Japanese Tourism Production System: The Case of Whistler,British Columbia

This article examines contemporary Japanese overseas tourism from a supplier‐side perspective using the concept of production systems. We first outline characteristics of the evolving structure of Japanese overseas tourism, with an emphasis on the global spread of Japanese travel companies. This provides a frame for presenting an empirical account of the transactional relationships in the Japanese package tour production system in Whistler, British Columbia, where Japanese tour operators play a pivotal role. We conclude that the recent expansion of Japanese travel companies is fostering the functional integration of the global tourism production system and exhibits increasing reflexivity.