低电阻率油气层物理参数变化机理研究

研究了淡水环境下富含粘土矿物、细颗粒砂岩低电阻率油气层. 分析了粘土的附加导电性,认为粘土质量百分数高且富含伊利石和蒙脱石的地层中,若地层水质量浓度小于15g/L等效NaCl盐溶液时,粘土的附加导电性是造成油气层电阻率低的首要原因. 同时分析了细颗粒、粘土质量百分数不高的储层,高的毛细管压力使束缚水饱和度很高,同样能形成低电阻率油气层. 储层中粘土质量百分数的多少对储层岩石电性特征(I-Sw曲线形态)有重要影响,可用于指导测井资料解释模型的选择.     

2000年4月6日磁暴期间磁扰变化在低纬子午链的纬度效应

利用低纬地磁子午链上H和D分量的分均值数据 ,分析了 2 0 0 0年 4月 6日磁暴期间磁扰变化的纬度效应 .主要特点是 :(1 )急始期间H分量急始跃变幅随磁纬降低而减小 ,且急始变幅的下降率随磁纬降低而逐渐增大 ;(2 )初相期间H分量第 2峰值的变幅和初相持续时间随磁纬降低而减小 ;(3)主相期间H分量迅速减小 ,并随纬度降低最大变幅明显增加 ;(4)恢复相H分量呈两阶段上升趋势 ,前一阶段迅速上升 ,后一阶段上升速度明显减小 .最后对这些磁扰变化的纬度效应与空间电流体系的密切关系作了讨论 .     

中国大陆及邻近海域的Rayleigh波群速度分布

利用Rayleigh波群速度资料反演得到中国大陆及其临近海域的(70°E-145°E,10°N-55°N)15-120s周期的群速度分布图像. 塔里木盆地在15s处清楚地显示为低速,在16-33s左右没有显示,但在36-5s显示为高速,说明塔里木盆地有较深的根. 青藏高原块体是44s至120s图像中最为突出的低速块体,南面与印度板块的分界线以及与北面的塔里木盆地、柴达木盆地的分界清晰,其块体中西部的速度低于东部. 泰国清迈附近存在一尺度为1000km左右的低速带,可能是青藏高原块体的物质向东南方向迁移造成上地幔物质上涌的结果. 南北地震带表现为强烈的速度梯度带,西面为低速,东面为高速. 中国南海的中央、日本海中央、菲律宾海表现为海洋性地壳. 菲律宾海的图像与地形及地震带完全吻合. 环绕菲律宾海及日本海存在400km左右宽的低速带,可能是岩浆活动带.     

温和水热法制备MZr2(PO4)3(M=Na,K,Rb)

在温和的水热条件下分别制备出纯净的磷酸锆钠 [NaZr2 (PO4) 3 ]、磷酸锆钾 [KZr2 (PO4) 3 ]和磷酸锆铷 [RbZr2 (PO4) 3 ]。研究了原料配比、矿化剂 (氟离子 )、反应时间和温度等水热晶化条件对产物生成的影响。发现在较宽的温和水热条件下可以制得这三种磷酸锆盐 ;随着碱金属离子的增大 ,产物的生成条件越来越窄 ;最佳制备条件是 :F- ZrO2 =2、P2 O5 ZrO2 =3 (均为摩尔比 )、[ZrOCl2 ]=0 6mol L、反应温度 1 5 0℃、反应时间 2天。用水热法没有制备出同一系列磷酸锆盐中的磷酸锆锂 [LiZr2 (PO4) 3 ]和磷酸锆铯 [CsZr2 (PO4) 3 ]。采用XRD、SEM、IR、Raman和XPS等现代物化仪器对产物的结构与物相纯度进行了测定与表征     

云南腾冲-潞西金成矿带地质特征与成矿预测

腾冲-潞西金成矿带是云南省重要金成矿带之一。通过分析其地质特征，解剖矿带内典型金矿床，讨论矿带成矿模式及找矿方向，进而提出了矿带内两个重要矿化集中区(段)。     

桂东流源地区地球化学特征及找矿预测

通过对桂东县流源地区的成矿规律与地球化学特征进行了分析．区内矿脉主要受NE向断裂控制，地球化学异常有效地反映了各矿床点的分布．根据地球化学异常特征及控矿规律，分析了异常区的预测矿种及找矿意义，预测了两个多金属矿远景区，为区内找矿指明了方向．     

高放废物处置库选址中低渗透介质地质研究的几个问题

低渗透介质是阻碍有害物质在地下迁移良好的天然屏障, 因此成为高放废物处置库围岩类型的首选。本文通过对高放废物处置库选址中地质研究的回顾, 阐述了低渗透介质地质研究的特点, 对地质参数测定、取样、水流模拟、地球化学模拟进行了重点介绍。     

Effect of the chemical composition of the crust on the metamorphic evolution of orogenic wedges

Petrological data provide a good record of the thermal structure of deeply eroded orogens, and, in principle, might be used to relate the metamorphic structure of an orogen to its deformational history. In this paper, we present two‐dimensional thermal modelling of various subduction models taking into account varying wedge geometry as well as variation of density and topography with metamorphic reactions. The models clearly show that rock type accreted in the wedge has important effects on the thermal regime of orogenic wedges. The thermal regime is dominated by radiogenic heat production. Material having high radioactive heat production, like the granodioritic upper crust, produces high temperature metamorphism (amphibolitic conditions). Material with low radioactive heat production results in low temperature metamorphism of greenschist or blueschist types depending on the thickness of the wedge. Application of this model to seemingly unrelated areas of the Central Alps (Lepontine Dome, Grisons) and Eastern Alps (Tauern Window) explains the coexistence and succession of distinct Barrovian and blueschist facies metamorphic conditions as the result of a single, continuous tectonic process in which the main difference is the composition of the incoming material in the orogenic wedge. Accretion of the European upper continental crust in the Lepontine and Tauern Domes produces Barrovian type metamorphism while accretion of oceanic sediments results in blueschist facies metamorphism in the Valaisan domain.     

Contrasting metamorphic evolution of metasedimentary rocks from the Çine and Selimiye nappes in the Anatolide belt, western Turkey

Abstract P–T conditions, mineral isograds, the relation of the latter to foliation planes and kinematic indicators are used to elucidate the tectonic nature and evolution of a shear zone in an orogen exhumed from mid‐crustal depths in western Turkey. Furthermore, we discuss whether simple monometamorphic fabrics of rock units from different nappes result from one single orogeny or are related to different orogenies. Metasedimentary rocks from the Çine and Selimiye nappes at the southern rim of the Anatolide belt of western Turkey record different metamorphic evolutions. The Eocene Selimiye shear zone separates both nappes. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P–T conditions of about 7 kbar and >550 °C. Metasedimentary rocks from the overlying Selimiye nappe have maximum P–T conditions of 4 kbar and c. 525 °C near the base of the nappe. Kinematic indicators in both nappes are related to movement on the Selimiye shear zone and consistently show a top‐S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet‐chlorite zone at the base, the chloritoid‐biotite zone and the biotite‐chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional S_R foliation, parallel the Selimiye shear zone and indicate that the Selimiye shear zone formed during this prograde greenschist to lower amphibolite facies metamorphic event but remained active after the peak of metamorphism. ⁴⁰Ar/³⁹Ar mica ages and the tectonometamorphic relationship with the Eocene Cyclades–Menderes thrust, which occurs above the Selimiye nappe in the study area, suggests an Eocene age of metamorphism in the Selimiye nappe. Metasedimentary rocks of the Çine nappe 20–30 km north of the Selimiye shear zone record maximum P–T conditions of 8–11 kbar and 600–650 °C. An age of about 550 Ma is indicated for amphibolite facies metamorphism and associated top‐N shear in the orthogneiss of the Çine nappe. Our study shows that simple monophase tectonometamorphic fabrics do not always indicate a simple orogenic development of a nappe stack. Preservation in some areas and complete overprinting of those fabrics in other areas apparently occur very heterogeneously.     

Metamorphic petrology and zircon geochronology of high-grade rocks from the central Mozambique Belt of Tanzania: crustal recycling of Archean and Palaeoproterozoic material during the Pan-African orogeny

New data on the metamorphic petrology and zircon geochronology of high‐grade rocks in the central Mozambique Belt (MB) of Tanzania show that this part of the orogen consists of Archean and Palaeoproterozoic material that was structurally reworked during the Pan‐African event. The metamorphic rocks are characterized by a clockwise P–T path, followed by strong decompression, and the time of peak granulite facies metamorphism is similar to other granulite terranes in Tanzania. The predominant rock types are mafic to intermediate granulites, migmatites, granitoid orthogneisses and kyanite/sillimanite‐bearing metapelites. The meta‐granitoid rocks are of calc‐alkaline composition, range in age from late Archean to Neoproterozoic, and their protoliths were probably derived from magmatic arcs during collisional processes. Mafic to intermediate granulites consist of the mineral assemblage garnet–clinopyroxene–plagioclase–quartz–biotite–amphibole ± K‐feldspar ± orthopyroxene ± oxides. Metapelites are composed of garnet‐biotite‐plagioclase ± K‐feldspar ± kyanite/sillimanite ± oxides. Estimated values for peak granulite facies metamorphism are 12–13 kbar and 750–800 °C. Pressures of 5–8 kbar and temperatures of 550–700 °C characterize subsequent retrogression to amphibolite facies conditions. Evidence for a clockwise P–T path is provided by late growth of sillimanite after kyanite in metapelites. Zircon ages indicate that most of the central part of the MB in Tanzania consists of reworked ancient crust as shown by Archean (c. 2970–2500 Ma) and Palaeoproterozoic (c. 2124–1837 Ma) protolith ages. Metamorphic zircon from metapelites and granitoid orthogneisses yielded ages of c. 640 Ma which are considered to date peak regional granulite facies metamorphism during the Pan‐African orogenic event. However, the available zircon ages for the entire MB in East Africa and Madagascar also document that peak metamorphic conditions were reached at different times in different places. Large parts of the MB in central Tanzania consist of Archean and Palaeoproterozoic material that was reworked during the Pan‐African event and that may have been part of the Tanzania Craton and Usagaran domain farther to the west.