The Zihuatanejo, Mexico, earthquake of 1994 December 10 (M= 6.6): source characteristics and tectonic implications

An analysis of the Zihuatanejo, Mexico, earthquake of 1994 December 10 ( M = 6.6), based on teleseismic and near-source data, shows that it was a normal-faulting, intermediate-depth ( H = 50 ± 5 km) event. It was located about 30 km inland, within the subducted Cocos plate. The preferred fault plane has an azimuth of 130°, a dip of 79° and a rake of −86°. The rupture consisted of two subevents which were separated in time by about 2 s, with the second subevent occurring downdip of the first. The measured stress drop was relatively high, requiring a Δσ of about a kilobar to explain the high-frequency level of the near-source spectra. A rough estimate of the thickness of the seismogenic part of the oceanic lithosphere below Zihuatanejo, based on the depth and the rupture extent of this event, is 40 km.
This event and the Oaxaca earthquake of 1931 January 15 ( M = 7.8) are the two significant normal-faulting, intermediate-depth shocks whose epicentres are closest to the coast. Both of these earthquakes were preceded by several large to great shallow, low-angle thrust earthquakes, occurring updip. The observations in other subduction zones show just the opposite: normal-faulting events precede, not succeed, updip, thrust shocks. Indeed, the thrust events, soon after their occurrence, are expected to cause compression in the slab, thus inhibiting the occurrence of normal-faulting events. To explain the occurrence of the Zihuatanejo earthquake, we note that the Cocos plate, after an initial shallow-angle subduction, unbends and becomes subhorizontal. In the region of the unbending, the bottom of the slab is in horizontal extension. We speculate that the large updip seismic slip during shallow, low-angle thrust events increases the buckling of the slab, resulting in an incremental tensional stress at the bottom of the slab and causing normal-faulting earthquakes. This explanation may also hold for the 1931 Oaxaca event.     

中国地下热水分布之特点及属性

本文依据我国近年来地下热水资源调研和勘探的新进展及其与有关的研究结果，简述我国地下热水形成和赋存的地热地质背景，分析和归纳构造隆起区中的温泉和中、新生代沉积盆地中的地下热水分布之基本特点，讨论主要水热带的地热学属性和沉积盆地热水的形成机制，为我国地热资源的勘探、开发和今后地球科学有关问题的深化研究提供参考。     

塔里木北部地区三叠系储层溶蚀作用机理

塔里木北部地区三叠系储层在成岩演化过程中曾经历两期溶蚀作用，深埋成岩环境的晚期溶蚀较早期近地表－浅埋成岩环境溶蚀要剧烈得多，溶蚀作用的最大特点是铝硅酸盐矿物较碳酸盐矿物剧烈。溶蚀作用发生的机理是由于三叠系储层处于８０～１２０℃热窗、成岩流体富含低分子量羧酸、碱度由低分子量羧酸控制，铝硅酸盐和碳酸盐矿物均处于去稳定状态。溶蚀作用的发育程度受控于储层砂体的沉积和岩石学特征以及早期成岩发育程度。     

应变软化在甘肃红柳河辉长质糜棱岩形成中的作用

本文论述的辉长质糜棱岩发现于甘肃北山红柳河蛇绿岩套中。在简单说明了糜棱岩的地质背景及特征、描述了变形岩石的显微构造特征之后，重点对糜棱岩形成过程中的应变软化机制作了论述。探讨了软化岩的存在、组构调整、粒度缩小，长石的动态重结晶，水以及主导变形机制的不断调整与转化等应变软化机制，在应力作用下使岩石逐步软化过程中所起的作用，得出这种糜棱岩是在拆离剪切作用下，应力在蛇绿岩中的软化岩石辉长岩中集中，从而形     

湖南柿竹园钨多金属矿床成矿机理的实验研究

作者在深入柿竹园钨多金属矿床野外地质工作的基础上，采用矿区燕山期花岗岩和泥盆系灰岩作为试料，在含ｐＨ＝４．０的０．３ＭＮａＣｌ＋０．７ＭＫＦ水溶液的高压釜中持续了１２０小时的交代作用。实验的结果表明了：在４００～７００℃的温度和２５０×１０５～９００×１０５Ｐａ的压力下，形成的交代岩及其钨、锡、钼、铋矿物基本上与矿区的矽卡岩及其矿石矿物共生组合相吻合，揭示了湖南柿竹园矽卡岩型钨多金属矿床成矿的机理     

乳山金矿煌斑岩及流体和氢、氧、锶同位素研究

乳山金矿床是胶东近年来探明的一个赋存在花岗岩中的石英脉型金矿床。矿出露的煌斑岩金含量较低，不可能是金矿化的重要物源者。     

试论水泥喷射搅拌桩的单桩承载力测试

水泥喷射搅拌桩（以下简称粉喷桩）是软土地基加固的一种方法。按规范，一般测试复合地基承载力作为加固效果的评判标准。粉喷桩是复合地基的基础，很多设计单位和建设单位要求对单桩进行承载力检测，验证桩的设计参数，检查施工质量。由于粉喷桩承载力能否测试，如何取值等，没有规范依据，给检测工作带来困难。本文就此问题谈一点看法。     

夯扩桩半模夯扩试验及夯扩机理探讨

设计了夯扩桩半模夯扩试验，采用读数显微镜直接测读上体质点位移，获得了不同密度的均匀砂土中砂粒的位移，由此确定土体的位移场和密度场。借鉴魏西克（Ｖｅｓｉｃ）球形孔穴膨胀理论和梅耶霍夫（Ｍｅｙｅｒｈｏｆ）塑性剪切理论，结合模型试验成果，对夯扩机理作了探讨，并定性地提出了夯扩机理模式。