内蒙古中部大青山地区推覆构造系统及与断层相关的褶皱

对内蒙古大青山地区西部推覆构造及与断层相关的褶皱的研究表明，大青山构造系统自南向北分为根部逆冲推覆岩席带、中部斜歪倒转褶皱一逆冲断层带和前缘断层相关褶皱带，变形强度由根带向前缘带逐渐减弱，前缘带发育典型的断层转折褶皱和断层传播褶皱。推覆构造运动方向由SSE向NNW推覆，主要形成于中侏罗世末期，推覆距离达10～20km，其形成可能与鄂霍次克洋在燕山期的闭合有关。     

RELOCATIONS AND FOCAL MECHANISM SOLOTIONS OF MS5.5 QIANGUO EARTHQUAKE SWARM IN JILIN PROVINCE IN 2013

We relocated a seismic swarm, which started in a mass from 31 October, 2013 in Qianguo County of Jilin Province, by using double difference location method, based on the phase data of regional digital seismic network and the crustal velocity model of Sunliao Basin. The characteristics of seismogenic fault have been investigated based on the spatial distribution image of the seismic swarm and the geophysical data near the epicenter area. The relocated epicenters of the swarm earthquakes have a precision of 0.9km in E-W, 0.7km in N-S and 1.2km in U-D direction, and show an apparent concentrated seismic belt trending N-W, with a length and width of 12km and 6km, respectively. The source depths of all events are shallow, with 80%in a range of 6~8km, and the events are apparently crowded together on the depth cross section. According to the relocated spatial distribution characteristics of the seismic swarm, the features that the medium size events happened successively, and the focal mechanism of the large size events in the swarm, we infer that the seismogenic tectonics of Qianguo seismic swarm is the thrust nappe structure inside the Keshan-Da'an fault zone. The fault plane inclines to the East direction, and is steep when close to the ground surface, which shows the typical characteristics of a listric thrust fault. The longitudinal length of the rupture plane is greater than the transverse length. According to the features of seismogenic tectonics, we infer that the three M_S ≥ 5.0 earthquakes occurred at the lower layer of the thrust rupture surface of the fault, while the aftershocks were triggered by the three events and occurred mainly at the upper layer of the rupture surface.     

龙门山中—南段构造格局及其形成演化

龙门山中－南段前陆盆地变形区,后山褶皱推覆带和滑覆飞来峰构成了本区的基本构造格局,它是在古生代扬子板块西缘稳定大陆边缘陆棚沉积建造的基础上经历印支运动以来多次变形改造的结果。     

滇西北剑川-虎跳峡大规模东向西逆冲推覆构造——兼论滇西扬子陆块区与西藏-三江造山系界线

基于剑川至虎跳峡一带的野外区域地质调查资料, 论述剑川-虎跳峡断裂的性质, 进而探讨扬子-华南陆块区与西藏-三江造山系的界线。野外观察显示, 该区存在大规模自东向西的逆冲推覆构造, 从剑川开始, 经丽江白汉场—汝寒坪、忠义村, 至香格里拉县的虎跳峡镇(下桥头)等地, 多条剖面可见上扬子稳定型的古生代及中生代三叠纪地层自东向西逆冲推覆在西藏-三江造山系地层层序之上, 推覆距离大于50 km。因此, 剑川—虎跳峡断裂不是两大板块的边界, 而是一条狭长的构造窗。两大板块的界线应是大理-剑川-丽江-木里断裂, 南段接红河断裂。      

新洲金矿床的地质特征及其成因

广东新洲金矿床产于褶皱式推覆构造外来系统——震旦系乐昌峡群变质地层之中.金矿床主要属碎裂石英脉型,次为蚀变糜棱岩型.成矿作用早期形成糜棱岩型金矿,为韧性剪切成矿期;晚期形成碎裂石英脉型金矿、属韧-脆性和脆性成矿期.成矿溶液为浅成中低温变质-混合岩化热液,成矿物质来源于震旦系,属褶皱式逆冲推覆-剪切带型金矿床.     

A Large-scale Tertiary Salt Nappe Complex in the Leading Edge of the Kuqa Foreland Fold-Thrust Belt, the Tarim Basin, Northwest China

The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping     

福建建瓯奖坑金矿地质地球化学特征及预测评价

奖坑金矿主要产于推覆体前锋的一系列叠瓦状缓断裂以及推覆体的后缘陡断裂中,为混合岩化、糜棱岩化变质热液金矿床。金矿体埋藏较浅、规模较大、品位、厚度较稳定。通过地球化学测量、地质构造等特征研究,预测金矿成矿规律．扩大找矿远景。     

黔西北地区隆起裂陷、逆冲推覆作用与铅锌成矿关系

黔西北地区是上扬子西缘成矿带重要矿集区,区内分布许多大中型铅锌矿床,其构造复杂,找矿难度大。为实现黔西北地区铅锌找矿突破,系统收集该区及邻区勘查和研究资料,通过类比美国密西西比地区铅锌矿床和相邻云南矿山厂、麒麟厂、毛坪等铅锌矿床,结合在黔西北地区实施的调查和勘查项目,开展野外调查和取样测试等,解剖区内典型矿床;以地史时期构造演化为线索,探索黔西北地区地壳裂陷、地壳隆升、玄武岩浆喷发、地层褶皱倒转、逆冲推覆与铅锌成矿关系。研究表明,海西期裂陷作用产生裂陷槽,深部成矿流体沿裂陷槽边界断裂上升,Pb、Zn等组分在裂陷槽内与岩层同沉积,形成高含量背景层;裂陷槽两侧地壳隆升拉张变薄,玄武岩浆喷发,强大的岩浆热能驱动,岩层中Pb、Zn等组分与岩浆携带的含矿热液,运移至垭都-紫云等大断裂及次级断裂、断裂旁侧的有利岩层中聚集,形成铅锌矿体（矿化）;印支早期构造运动,地层褶皱倒转、断裂、逆冲推覆,沿断裂上升的含矿热液,改造早期的铅锌矿体（矿化）。该区的铅锌矿床不属于MVT型,是叠加（复合/改造）型矿床。印支晚期、燕山期、喜山期的构造运动,没有明显铅锌成矿作用发生,破坏早期形成的矿床。     

南海东北部陆坡与恒春海脊天然气水合物分布的地震反射特征对比

对“探宝号”调查船2001年8月在南海东北部陆坡及台湾南部恒春海脊海域采集的多道地震剖面资料进行了地震反射波数据分析、解释和研究,并对南海北部陆坡、陆隆及其东侧俯冲带等区域天然气水合物矿藏的成藏规律及分布特征作了初步的分析与探讨,结果表明:(1)南海东北部陆坡和台湾南部恒春海脊海域地震剖面上均显示有BSR,但两区域构造成因、形式和相关地质环境的不同造成了天然气水合物的成因及过程不同。(2)南海东北部陆坡区域的天然气水合物形成与该区广泛发育的断裂带、滑塌构造体及其所形成的压力场屏蔽环境有关,而台湾南部恒春海脊海域天然气水合物的形成则与马尼拉海沟俯冲带相关的逆冲推覆构造、增生楔及其所对应的海底流体疏导体系有关。(3)南海陆缘区域广泛发育有各种断裂带、滑塌构造体、泥底辟、俯冲带、增生楔等,且温压环境合适,是天然气水合物矿藏极有可能广泛分布的区域。     

江苏东海毛北榴辉岩的矿物化学及其成因问题

本文利用电子探针,分析了江苏东海毛北榴辉岩中的石榴石和单斜辉石的化学组成。利用矿物地质温度计,计算了毛北榴辉岩的成岩平衡温度。结合本区的大地构造环境,提出在早元古代末期,华北陆块曾发生向南的大型堆覆构造,苏北地区即为推覆体前缘。