东秦岭中部奥陶系-志留系界线地层及腕足动物群

东秦岭中部晚奥陶世和早志留世地层分布较广,化石较丰富,尤其是腕足类,分为寺岗组、石燕河组、刘家坡组和张湾组。曾庆銮等(1993)根据腕足类及其群落的更替,把石燕河组和刘家坡组归於早志留世,因而引起较大争论。本文据岩性将寺岗组和石燕河组分别改称为石燕河组下段和上段,并据腕足类化石认为石燕河组和刘家坡组应归於晚奥陶世、张湾组为早志留世;另据上述地层生物群落的特征及群落的更替,认为从石燕河组到刘家坡组,以及刘家坡组至张湾组恰好反映了全球冰期引起的晚奥陶世海退和早志留世冰期结束引起的海侵,故本区奥陶系-志留系界线宜划在刘家坡组和张湾组之间。     

大别山榴辉岩一片麻岩杂岩的成因

大别山榴辉岩由辉长岩、大陆拉斑玄武岩和少量泥灰质经高压变质作用形成。大别地块可划分出四个形成条件不同的榴辉岩区,它们代表一种构造－岩石组合体。片麻岩杂岩中各种高压变质岩类的发现证明它们与榴辉岩一起经历了原地高压变质过程。二者变质作用Ｐ－Ｔ参数的差异归因于抬升过程中退变质反应速度的不同。不同地区榴辉岩退变质组合及Ｐ－Ｔ条件与围岩的一致性表明,大别杂岩现今所展示的“递增”变质带是由榴辉岩相退变质作用形成的。高压榴辉岩－片麻岩杂岩的产生是印支期扬子与华北两个大陆板块碰撞的结果。     

秦岭南缘勉略带构造属性及晚古生代地质背景:来自碎屑锆石U-Pb年代学的制约

勉略构造带作为秦岭造山带内重要的构造边界,关于其构造属性及晚古生代以来的地质背景,一直是学术界争论的焦点。碎屑锆石U-Pb年代学在限定地层单元的最大沉积年龄、研究区域构造岩浆事件及约束构造地质背景等方面行之有效。基于此,通过对勉略带内五郎坪北侧两河口变沉积地层和侵入其中的变形花岗岩脉体进行LA-ICP-MS锆石U-Pb年代学研究。获得2件变形花岗岩脉的结晶年龄均为406±1Ma。碎屑锆石主年龄谱分别为422～456Ma和558～826Ma,峰值年龄为441Ma和771Ma、813Ma,次级年龄谱分别为942～1495Ma和1658～2981Ma,峰值年龄不明显。依据最小一组碎屑锆石的峰值年龄(441Ma),和侵入其中的变形花岗岩脉(406±0.6Ma),限定该变沉积地层形成时代为406～441Ma(S_1-D_1)。碎屑锆石年龄谱显示该套变沉积地层物质来源较为复杂,其中秦岭造山带及扬子板块北缘早古生代、新元古代岩浆岩为其提供了74%±的物源,古老变质基底为其提供了26%±的物源。通过与区域上已有资料对比,认为勉略构造带内晚古生代沉积地层形成环境与邻区大致相同,且本次所获得的变沉积岩碎屑锆石年龄谱也与邻区泥盆系相似。综合认为,勉略构造带与邻区在晚古生代应属同一构造环境,晚古生代"勉略海盆"应当包括整个南秦岭。     

Fault slip analysis of Quaternary faults in southeastern Korea

The Quaternary stress field has been reconstructed for southeast Korea using sets of fault data. The subhorizontal direction of the maximum principal stress (σ₁) trended ENE and the direction of the minimum principal stress (σ₃) was nearly vertical. The stress ratio (Φ = (σ₂ − σ₃) / (σ₁ − σ₃)) value was 0.65. Two possible interpretations for the stress field can be made in the framework of eastern Asian tectonics; (1) The σ_Hmax trajectory for southeast Korea fits well with the fan-shaped radial pattern of maximum principal stress induced by the India–Eurasia collision. Thus, we suggest that the main source for this recent stress field in southeast Korea is related to the remote India–Eurasia continental collision. (2) The stress field in Korea shows a pattern similar to that in southwestern Japan. The origin for the E–W trending σ_Hmax in Japan is known to be related to the mantle upwelling in the East China Sea. Thus, it is possible that Quaternary stress field in Korea has evolved synchronously with that in Japan. We suggest further studies (GPS and in situ stress measurement) to test these hypotheses.     

Biostratigraphy of Jurassic-Cretaceous boundary sediments in the Eastern Crimea

The Dvuyakornaya Formation section in the eastern Crimea is described and subdivided into biostratigraphic units based on ammonites, foraminifers, and ostracodes. The lower part of the formation contains first discovered ammonites of the upper Kimmeridgian (Lingulaticears cf. procurvum (Ziegler), Pseudowaagenia gemmellariana Olóriz, Euvirgalithacoceras cf. tantalus (Herbich), Subplanites sp.) and Tithonian (?(Lingulaticeras efimovi (Rogov), Phylloceras consaguineum Gemmellaro, Oloriziceras cf. schneidi Tavera, and Paraulacosphinctes cf. transitorius (Oppel)). Based on the assemblage of characteristic ammonite species, the upper part of the formation is attributed to the Berriasian Jacobi Zone. Five biostratigraphic units (zones and beds with fauna) distinguished based on foraminifers are the Epistomina ventriosa-Melathrokerion eospirialis Beds and Anchispirocyclina lusitanica-Melathrokerion spirialis Zone in the upper Kimmeridgian-Tithonian, the Protopeneroplis ultragranulatus-Siphoninella antiqua, Frondicularia cuspidiata-Saracenaria inflanta zones, and Textularia crimica Beds in the Berriasian. The Cyrherelloidea tortuosa-Palaeocytheridea grossi Beds of the Upper Jurassic and Raymoorea peculiaris-Eucytherura ardescae-Protocythere revili Beds of the Berriasian are defined based on ostracodes. A new biostratigraphic scale is proposed for the upper Kimmeridgian-Berriasian of the eastern Crimea. The Dvyyakornaya Formation sediments are considered as deepwater facies accumulated on the continental slope.     

Mesozoic transtensional basin history of the Eastern Cordillera, Colombian Andes: Inferences from tectonic models

Backstripping analysis and forward modeling of 162 stratigraphic columns and wells of the Eastern Cordillera (EC), Llanos, and Magdalena Valley shows the Mesozoic Colombian Basin is marked by five lithosphere stretching pulses. Three stretching events are suggested during the Triassic–Jurassic, but additional biostratigraphical data are needed to identify them precisely. The spatial distribution of lithosphere stretching values suggests that small, narrow (<150 km), asymmetric graben basins were located on opposite sides of the paleo-Magdalena–La Salina fault system, which probably was active as a master transtensional or strike-slip fault system. Paleomagnetic data suggesting a significant (at least 10°) northward translation of terranes west of the Bucaramanga fault during the Early Jurassic, and the similarity between the early Mesozoic stratigraphy and tectonic setting of the Payandé terrane with the Late Permian transtensional rift of the Eastern Cordillera of Peru and Bolivia indicate that the areas were adjacent in early Mesozoic times. New geochronological, petrological, stratigraphic, and structural research is necessary to test this hypothesis, including additional paleomagnetic investigations to determine the paleolatitudinal position of the Central Cordillera and adjacent tectonic terranes during the Triassic–Jurassic. Two stretching events are suggested for the Cretaceous: Berriasian–Hauterivian (144–127 Ma) and Aptian–Albian (121–102 Ma). During the Early Cretaceous, marine facies accumulated on an extensional basin system. Shallow-marine sedimentation ended at the end of the Cretaceous due to the accretion of oceanic terranes of the Western Cordillera. In Berriasian–Hauterivian subsidence curves, isopach maps and paleomagnetic data imply a (>180 km) wide, asymmetrical, transtensional half-rift basin existed, divided by the Santander Floresta horst or high. The location of small mafic intrusions coincides with areas of thin crust (crustal stretching factors >1.4) and maximum stretching of the subcrustal lithosphere. During the Aptian–early Albian, the basin extended toward the south in the Upper Magdalena Valley. Differences between crustal and subcrustal stretching values suggest some lowermost crustal decoupling between the crust and subcrustal lithosphere or that increased thermal thinning affected the mantle lithosphere. Late Cretaceous subsidence was mainly driven by lithospheric cooling, water loading, and horizontal compressional stresses generated by collision of oceanic terranes in western Colombia. Triassic transtensional basins were narrow and increased in width during the Triassic and Jurassic. Cretaceous transtensional basins were wider than Triassic–Jurassic basins. During the Mesozoic, the strike-slip component gradually decreased at the expense of the increase of the extensional component, as suggested by paleomagnetic data and lithosphere stretching values. During the Berriasian–Hauterivian, the eastern side of the extensional basin may have developed by reactivation of an older Paleozoic rift system associated with the Guaicáramo fault system. The western side probably developed through reactivation of an earlier normal fault system developed during Triassic–Jurassic transtension. Alternatively, the eastern and western margins of the graben may have developed along older strike-slip faults, which were the boundaries of the accretion of terranes west of the Guaicáramo fault during the Late Triassic and Jurassic. The increasing width of the graben system likely was the result of progressive tensional reactivation of preexisting upper crustal weakness zones. Lateral changes in Mesozoic sediment thickness suggest the reverse or thrust faults that now define the eastern and western borders of the EC were originally normal faults with a strike-slip component that inverted during the Cenozoic Andean orogeny. Thus, the Guaicáramo, La Salina, Bitúima, Magdalena, and Boyacá originally were transtensional faults. Their oblique orientation relative to the Mesozoic magmatic arc of the Central Cordillera may be the result of oblique slip extension during the Cretaceous or inherited from the pre-Mesozoic structural grains. However, not all Mesozoic transtensional faults were inverted.     

Multiphase structural evolution of the western margin of the Girardot subbasin, Upper Magdalena Valley, Colombia

More than 1400 km of two-dimensional seismic data were used to understand the geometries and structural evolution along the western margin of the Girardot Basin in the Upper Magdalena Valley. Horizons are calibrated against 50 wells and surface geological data (450 km of traverses). At the surface, low-angle dipping Miocene strata cover the central and eastern margins. The western margin is dominated by a series of en echelon synclines that expose Cretaceous–Oligocene strata. Most synclines are NNE–NE trending, whereas bounding thrusts are mainly NS oriented. Syncline margins are associated mostly with west-verging fold belts. These thrusts started deformation as early as the Eocene but were moderately to strongly reactivated during the Andean phase. The Girardot Basin fill records at least four stratigraphic sequences limited by unconformities. Several periods of structural deformation and uplifting and subsidence have affected the area. An early Tertiary deformation event is truncated by an Eocene unconformity along the western margin of the Girardot Basin. An Early Oligocene–Early Miocene folding and faulting event underlies the Miocene unconformity along the northern and eastern margin of the Girardot Basin. Finally, the Late Miocene–Pliocene Andean deformation folds and erodes the strata along the margins of the basin against the Central and Eastern Cordilleras.     

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.     

TRANSALP—deep crustal Vibroseis and explosive seismic profiling in the Eastern Alps

The TRANSALP consortium, comprising institutions from Italy, Austria and Germany, carried out deep seismic reflection measurements in the Eastern Alps between Munich and Venice in 1998, 1999 and 2001. In order to complement each other in resolution and depth range, the Vibroseis technique was combined with simultaneous explosive source measurements. Additionally, passive cross-line recording provided three-dimensional control and alternative north–south sections. Profits were obtained by the combination of the three methods in sectors or depths where one method alone was less successful.The TRANSALP sections clearly image a thin-skinned wedge of tectonic nappes at the northern Alpine front zone, unexpected graben or half-graben structures within the European basement, and, thick-skinned back-thrusting in the southern frontal zone beneath the Dolomite Mountains. A bi-vergent structure at crustal scale is directed from the Alpine axis to the external parts. The Tauern Window obviously forms the hanging wall ramp anticline above a southward dipping, deep reaching reflection pattern interpreted as a tectonic ramp along which the Penninic units of the Tauern Window have been up-thrusted.The upper crystalline crust appears generally transparent. The lower crust in the European domain is characterized by a 6–7 km thick laminated structure. On the Adriatic side the lower crust displays a much thicker or twofold reflective pattern. The crustal root at about 55 km depth is shifted around 50 km to the south with respect to the main Alpine crest.     

Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.