Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.     

Analysis of earth dams affected by the 2001 Bhuj Earthquake

An earthquake of magnitude of 7.6 (M_w 7.6) occurred in Bhuj, India on January 26, 2001. This event inflicted damages of varying extents to a large number of small to moderate size multi-zone earth dams in the vicinity of the epicenter. Some of the distress was due to the liquefaction of saturated alluvium in foundation. Liquefaction was relatively localized for the majority of these dams because the earthquake struck in the middle of a prolonged dry season when the reservoirs behind these dams were nearly empty and shallow alluvium soils underneath the downstream portions of the dams were partly dry. Otherwise, liquefaction of foundation soils would have been more extensive and damage to these dams more significant. Six such dams have been examined in this paper. Four of these facilities, Chang, Shivlakha, Suvi, and Tapar were within the 50 km of epicenter region. These dams underwent free-field ground motion with peak ground accelerations between 0.28g to 0.52g. Of these Chang Dam underwent severe slumping, whereas Shivlakha, Suvi, and Tapar Dams were affected severely especially over the upstream sections. Fatehgadh Dam and Kaswati Dam were affected relatively less severely. Foundation conditions underneath these dams were first examined for assessing liquefaction potential. A limited amount of subsurface information available from investigations undertaken prior to the earthquake indicates that, although the foundation soils within the top 2.0 to 2.5 m underneath these dams were susceptible to liquefaction, Bhuj Earthquake did not trigger liquefaction because of lack of saturation of these layers underneath the downstream portions of these dams. These dams were then analyzed using a simple sliding block procedure using appropriate estimates of undrained soil strength parameters. The results of this analysis for these structures were found to be in general agreement with the observed deformation patterns.     

Influences of wastewater discharges on the water quality of Mamasın dam watershed in Aksaray, Central Anatolian part of Turkey

Sustaining the human ecological benefits of surface water requires carefully planned strategies for reducing the cumulative risks posed by diverse human activities. Municipal governments in Aksaray City play a key role in developing solutions to surface water management and protection problems. The responsibility to provide drinking water and sewage works, regulate the use of private land, and protect public health provides the mandate and authority to take action. A large part of Aksaray City uses Mamasın dam water as its primary source for drinking water. Several point sources of contamination may result from direct wastewater discharges from Melendiz and Karasu rivers, which recharge the Mamasın dam watershed. Relevant studies were carried out for monitoring the eutrophication process, which usually occurs in the static water mass of the Mamasın dam lake. This process may be caused by the continual increase in nutrients and decrease of O₂ levels, causing anaerobic conditions. Stimulated algae growth in these water bodies consequently reduces water quality. Hydrochemical parameters were evaluated to estimate the types of pollution sources, the level of pollution, and its environmental impacts on the Mamasın dam drinking water reservoir.     

广西南丹地区有色金属尾砂型人工矿床地质特征及其资源化

广西南丹地区尾矿分布于大厂、车河、芒场等矿区。尾砂来自以锡石为主的多金属矿床，尾砂中除Sn，Pb，Zn，Ag，Sb的质量分数达到工业指标外，Au亦达到综合利用指标。通过试验证明，对尾矿中的细微粒锡石可采用风力分级选矿、磁选和化学选矿等方法回收；尾砂中的非金属资源可作为填充材料、水泥原料利用，使尾砂型人工矿床充分的资源化。     

Left upstream slope design for the Çatalan Dam, Adana, Turkey and its behaviour under actual earthquake loading

An investigation and remediation of instability along upstream cut slopes for an earthfill dam in differentially weathered rock in southern Turkey is described. The major instability problem was a 45-m high and 200-m long previously cut slope next to the main axis of the dam, above the diversion tunnels and water outlet structures. The slope was first designed and excavated in 1986 based on the temporary berm approach. Rising water level in the reservoir would change the shear strength parameters and the pore-water pressure in the slope; thus, probable deep failure would damage the entrance of the diversion tunnels and water outlet structures, as well as the earthfill embankment of the dam. In June 1996, the slope face was re-excavated and protected against wave erosion by placement of a layer of rock riprap over a layer of bedding and a filter material. A strong earthquake (M_S = 6.2) occurred during a period of rapid drawdown in 27 June 1998. The slope remained stable, although numerous tension cracks developed in Quaternary terrace deposits near the reservoir area.     

Investigation of the elevation of saltwater wedge due to subsurface dams

Subsurface dams are rather effective and used for the prevention of saltwater intrusion in coastal regions around the world. We carried out the laboratory experiments to investigate the elevation of saltwater wedge after the construction of subsurface dams. The elevation of saltwater wedge refers to the upward movement of the downstream saltwater wedge because the subsurface dams obstruct the regional groundwater flow and reduce the freshwater discharge. Consequently, the saltwater wedge cannot further extend in the longitudinal direction but rises in the vertical profile resulting in significant downstream aquifer salinization. In order to quantitatively address this issue, field-scale numerical simulations were conducted to explore the influence of various dam heights, distances, and hydraulic gradients on the elevation of saltwater wedge. Our investigation shows that the upward movement of the saltwater wedge and its areal extension in the vertical domain of the downstream aquifer become more severe with a higher dam and performed a great dependence on the freshwater discharge. Furthermore, the increase of the hydraulic gradient and the dam distance from the sea boundary leads to a more pronounced wedge elevation. This phenomenon comes from the variation of the freshwater discharge due to the modification of dam height, location, and hydraulic gradient. Large freshwater discharge can generate greater repulsive force to restrain the elevation of saltwater wedge. These conclusions provide theoretical references for the behaviour of the freshwater–seawater interface after the construction of subsurface dams and help optimize the design strategy to better utilize the coastal groundwater resources.     

Review and enhancement of 3D concrete models for large‐scale numerical simulations of concrete structures

The present paper focuses on selected plasticity and damage‐plasticity models for describing the 3D material behavior of concrete. In particular, a plasticity model and a damage‐plasticity model are reviewed and evaluated. Based on the results of the evaluation, enhancements are proposed, aiming at improving the correspondence between predicted and observed material behavior and aiming at implementing a robust and efficient stress update algorithm in a finite element program for performing large‐scale 3D numerical simulations of concrete structures. The capabilities of the concrete models are demonstrated by 3D numerical simulations of benchmark tests with combined bending and torsional loading and combined compression and shear loading and by a large‐scale 3D finite element analysis of a model test of a concrete arch dam. Copyright © 2011 John Wiley & Sons, Ltd.     

Uncertainty in dam safety risk analysis

The character and importance of uncertainty in dam safety risk analysis drives how risk assessments are used in practice. The current interpretation of uncertainty is that, in addition to the aleatory risk which arises from presumed uncertainty in the world, it comprises the epistemic aspects of irresolution in a model or forecast, specifically model and parameter uncertainty. This is true in part but it is not all there is to uncertainty in risk analysis. The physics of hazards and of failure may be poorly understood, which goes beyond uncertainty in its conventional sense. There may be alternative scenarios of future conditions, for example non-stationarity in the environment, which cannot easily be forecast. There may also be deep uncertainties of the type associated with climate change. These are situations in which analysts do not know or do not agree on the system characterisation relating actions to consequences or on the probability distributions for key parameters. All of these facets are part of the uncertainty in risk analysis with which we must deal.     

岩溶坝基帷幕灌浆高注浆量控制措施与效果分析

帷幕灌浆是坝基防渗处理的一种常用技术手段,而岩溶地区因其岩溶发育致使岩溶裂隙和通道纵横交错,且难以获取其规律性,灌浆过程中往往会出现注浆量偏高的现象。为了能够既有效控制帷幕灌浆成本,又确保帷幕灌浆施工质量,就需要采用科学、合理、可靠的施工技术措施和手段,对高注浆量的情况进行重点控制和改进。本文结合某水电站岩溶坝基帷幕灌浆中突出的高注浆量现象,通过有针对性地从技术措施和控制手段等方面的综合探索与应用,最终达到了坝基防渗的目的,并最大限度地节约了帷幕灌浆的时间,有效控制了高材料消耗所带来的高成本问题,为类似项目的帷幕灌浆积累了一定的经验。     

微动技术在堤坝渗漏探测中的应用

堤坝是重要的水利工程,其安全性至关重要。坝体渗漏是常见的安全隐患之一,对坝体渗漏位置、程度以及坝体结构变化的探测一直是重要的物探课题。微动勘探作为一种新兴的物探手段,应用范围正逐步拓展,通过某水库大坝渗漏检测实例,展示频率-波数法微动线性点阵剖面测量进行大坝渗漏检测的效果,该技术通过提取频散曲线及视S波速度成像,刻画地层速度结构并圈定异常,可实现对大坝渗漏快速精确的无损探测,具有一定的方法优势和广泛的应用前景。