南海北部台西南盆地973-4岩芯碳的地球化学特征

对南海北部台西南盆地天然气水合物潜在区(973-4岩芯)碳的形态、含量和稳定同位素组成进行了分析,并探讨了成岩环境因素和细菌种群与碳地球化学行为的关系。结果显示:(1)TOC含量为0.4%~1.3%,δ~(13)CTOC为–26.7‰~–23.9‰,说明973-4岩芯主要为陆源有机质,能够满足微生物产甲烷的需要;DIC和δ~(13)CIC的垂向变异及其显著负相关,指示:973-4岩芯560~890 cm深度段有SO42–驱动的AOM反应。(2)p H、Eh、沉积物粒径等成岩环境参数与TOC、IC、δ~(13)CTOC、δ~(13)CIC等碳地化参数显著相关。(3)细菌种群与DIC、δ~(13)CIC显著相关。结论认为:(1)973-4岩芯碳的地化行为与天然气水合物成藏存在明显响应关系。(2)成岩环境参数的垂向变异与碳的地球化学特征密切相关。(3)细菌种群对碳的地化参数变异有着显著影响。     

东海内陆架表层沉积物粒度及其净输运模式

根据对东海内陆架海底沉积物的粒度测试,运用Gao-Collins"粒度趋势分析"方法,探讨了东海内陆架海底表层沉积物的粒度分布特征和净输运趋势。结果表明,研究区表层沉积物可以分为两类:细颗粒(>5Φ)和粗颗粒(<5Φ);细颗粒分布于研究区的大部分区域,而粗颗粒主要分布在闽江、瓯江等入海河流口门以及马祖等海岛附近;表层沉积物的平均粒径、分选系数、偏态等粒度参数对应性较好,总体特征为粒径越粗,分选越差,偏态更正偏,而粒径越细,分选越好,偏态也较低;粒径趋势分析显示东海陆架表层沉积物的运移模式总体为NE—WS方向运移,而研究区边缘在运移过程中发生向左右两侧的偏移,南部闽江河口区沉积物由近岸向海方向辐射运移,研究区表层沉积物的净输运模式主要受控于流系和地形等多种因素。     

黄海南部黄鲫(Setipinna taty)资源利用分析

以2005-2006年江苏省帆式张网渔获资料为基础,分析研究了黄海南部黄鲫资源的时空分布、群体组成结构以及产卵群体生物学特征.结果表明,黄海南部黄鲫主要利用渔期为春季3-5月、冬季1月或12月.春季高产渔区主要分布在大沙渔场的西南部和吕泗渔场的东部,冬季和秋季高产渔区相对靠近或较春季高产渔区偏东.黄鲫高产渔区的分布无明显季节变化特征.黄鲫渔获群体主要由体长70-110mm、体重0-15g的个体组成,产卵群体的平均体重范围为8.7-12.0g.与1981-2000年的研究结果相比,黄鲫个体小型化越趋显著,当前利用个体偏小.     

养殖黄颡鱼(Pelteobagrus fulvidraco) 鮰爱德华氏菌(Edwardsiella ictaluri)的分离鉴定与生物学特性研究

从四川眉山与新津两地患红头病的养殖黄颡鱼体内分离到2株优势菌(CHNYC001与CHNYC002),以腹腔注射与浸泡的方式进行人工感染试验,证实其为养殖黄颡鱼红头病的病原菌。根据分离菌株的形态、生理生化特性,结合16SrDNA序列测定(GenBank登录号分别为FJ766524、FJ766525)与系统发育分析,将其鉴定为鮰爱德华氏菌(Edwardsie lla ictaluri)。分离菌株最适生长温度为20—30℃,最适生长pH为7.0,在含盐量2%以上的培养基上不生长,对氟苯尼考、强力霉素、洛美沙星等敏感,对乙酰螺旋霉素、磺胺甲基异噁唑和麦迪霉素等不敏感。临床病理特征分析发现,养殖黄颡鱼感染爱德华氏菌临床上分为急性与慢性两种类型,急性型主要表现为败血症的病变特征,慢性型表现为头顶出血,发红与溃疡的病变特征。     

海南典型热带海草床4种代表性鱼类的生长特征及其对海草资源量变化的响应

文章以海南岛新村湾、黎安港和潭门港海草床为研究区域, 选取褐篮子鱼(Siganus fuscessens)、点斑篮子鱼(Siganus guttatus)、四带牙鯻(Pelates quadrilineatus)和细鳞鯻(Terapon jarbua) 4种代表性鱼类为研究对象, 分析其体长与体质量的关系, 并探讨4种鱼类对海草资源量变化的响应。结果表明, 除栖息于潭门港海草床的4种鱼为负异速生长, 其他区域海草床的鱼类均为正异速或等速生长; 4种鱼的体质量生长速率(即异速生长因子b)和肥满度呈现黎安港>新村湾>潭门港的趋势, 并与3个海草床的海草覆盖率、密度和生物量的变化趋势一致; 推测海草资源量下降可能增加鱼类的被捕食压力和减少食物来源, 从而导致生活于海草床的代表性鱼类生长速率下降。     

Comparison of numerical solution and semi-empirical formulas to predict the effects of important design parameters on porpoising region of a planing vessel

Stability of the marine vessels in different conditions is one of the most important problems in the design of a planing vessel. In this research, the effects of some important design parameters (mass, longitudinal center of mass, deadrise angle, and length) of DTMB 62 model 4667-1 planing hull on the drag and also on the longitudinal dynamic stability (porpoising) are investigated in the velocity range of 2.12–8.486 m/s in calm water. In this paper, both numerical simulation of Reynolds Average Naiver Stokes (RANS) equations and semi-empirical formulas of Savitsky are used to analyze the motion of a 4667 planing vessel in calm water with two degrees of freedom (2DOF). For this purpose a finite volume, ANSYS-FLUENT, code is used to solve the Navier-Stokes equations for the simulation of the flow field around the vessel. In addition, an explicit VOF scheme and SST- Kω model is used with dynamic mesh scheme to capture the interface of a two-phase flow and to model the turbulence respectively, in 2DOF model (heave and pitch). Also, the results of both methods are compared with each other. According to the present results, changing the aspect ratio of the vessel and also the longitudinal center of gravity have the most effect on the porpoising region.     

Feedback control system for blow-out preventer positioning

During the drilling of ultra-deep-water subsea petroleum wells, a blow-out preventer (BOP), a piece of safety equipment, must be assembled on the wellhead. The BOP is suspended using the drilling riser during the wellhead approach operation, and the riser's top end is connected to the floating platform rig. This article presents a feedback control system for the automatic approach of the BOP to the wellhead. Compared to state-of-the-art controls, ours does not require ancillary thrusters installed alongside the riser nor inclination sensors atop of the drilling riser. Additionally, our proposed control embeds a closed-loop dynamic positioning system, thus retaining the characteristics of the original control system and adding an extra closed-loop. This eases implementation of the BOP approach control to an existing platform. To calculate the optimal gains for the BOP controller, we assume a linear system for the riser, including only the pendulum-shape. The simulation is carried out using nonlinear models for both riser and floating platform. We assume an International Towing Tank Conference standard semi-submersible platform, coupled with a 3000-m free-hanging vertical riser for the time-domain simulation. The results show the BOP tracking to be a step-shaped input signal under current and wave loads. A discussion of the performance of feedback control under different environmental loads is also included.     

Hydrodynamic performance of a T-shaped floating breakwater

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.     

胶州湾冬季浮游植物光合作用特征原位研究

目前关于中国近海浮游植物光合作用特征的研究较少,尤其是海洋浮游藻类冬季光合生理生态方面的研究少见报道。本实验利用浮游植物荧光仪Phyto-PAM测量了胶州湾浮游植物最大光化学量子产量、快速光曲线、光化学淬灭以及非光化学淬灭,通过显微镜镜检获得浮游植物群落结构组成与丰度结果,结合相应的环境因子,对胶州湾冬季浮游植物进行了原位光合作用特征研究。结果表明:调查期间胶州湾浮游植物具有较高的光合活性与潜力,最大光化学量子产量保持在0.69左右,光能利用效率大部分处于0.2—0.3之间,快速光曲线十分典型,当光强超过1000μmol/(s·m2)后依然能保持较好的光合活性,光化学淬灭值较高;当光强超过1500μmol/(s·m2)后,相对电子传递速率开始下降,实际光量子收益达到最低,非光化学淬灭升高,此时海洋浮游植物将光合机构吸收的过量光能以热能的形式耗散掉,有效地保护了胶州湾浮游植物的光合器官不因高光强的照射而受到损伤。冬季大部分时期胶州湾浮游植物丰度极低,但是湾内浮游植物具有较强的光合活性,加上相对稳定的水文、生物等环境以及较丰富的营养盐和相对有利的营养盐结构,是推动冬季浮游植物高峰期出现的关键生理生态因素。     

东海西部陆架海域水团的季节特征分析

On the basis of the CTD data and the modeling results in the winter and summer of 2009, the seasonal characteristics of the water masses in the western East China Sea shelf area were analyzed using a cluster analysis method. The results show that the distributions and temperature-salinity characteristics of the water masses in the study area are of distinct seasonal difference. In the western East China Sea shelf area, there are three water masses during winter, i.e., continental coastal water（CCW）, Taiwan Warm Current surface water（TWCSW） and Yellow Sea mixing water（YSMW）, but four ones during summer, i.e., the CCW, the TWCSW, Taiwan Warm Current deep water（TWCDW） and the YSMW. Of all, the CCW, the TWCSW and the TWCDW are all dominant water masses. The CCW, primarily characterized by a low salinity, has lower temperature, higher salinity and smaller spatial extent in winter than in summer. The TWCSW is warmer, fresher and smaller in summer than in winter, and it originates mostly from the Kuroshio surface water（KSW） northeast of Taiwan, China and less from the Taiwan Strait water during winter, but it consists of the strait water and the KSW during summer. The TWCDW is characterized by a low temperature and a high salinity, and originates completely in the Kuroshio subsurface water northeast of Taiwan.