A multi-scale study on land use and land cover quality change: The case of the Yellow River Delta in China

This paper presents a case study of the Yellow River Delta in China, to trace land use and land cover changes during the past 20 years, with an emphasis on land quality changes. Three sets of data are used in this case study: remote sensing data derived from satellite images; crop yield data from statistics; and soil data collected by the researchers in the field. Our study reveals that at the regional scale, LUCC has taken place in a positive direction: vegetation cover has been expanding and crop yields per hectare have been on rise. However, while the overall eco-environment has improved, the improvement is uneven across the Delta region. At local levels, some areas show signs of increased salinization and declining organic content. Both natural forces and human activities are responsible for the LUCC, but human activities play a more important role. While some impacts of human activities are positive, the damages are often long-lasting and irreversible. We also conclude that it is necessary to use both macro data (such as remote sensing data) and micro data (data collected in the field) to study land quality change. The former are efficient in examining land quality changes at the regional scale, the latter can serve to verify ground patterns revealed from macro data and help to identify local variations, so as to get a comprehensive understanding of LUCC and promote sustainable land use and land management. This revised version was published online in July 2006 with corrections to the Cover Date.     

县市级政府决策信息系统的开发应用:专业GIS 软件SK set V4 .0功能介绍———以贵州沿河土家族自治县资源遥感信息系统为例

SK setV4.0是中国地质科学院岩溶地质研究所GIS中心2001年4月开发成功的、具有自主板权的专业GIS平台软件。它集成了现今较为先进的组件、控件重用，面向对象编程等技术，并以美国Inprise公司的BorladnC^ Builder编译软件为开发平台，提供了全中文菜单环境，不仅具有基本信息和多图层查询、相关分析动态监测、多因子分析、图斑编辑、自动演示、系统维护等功能，而且还具有快速响应的工具条、友好的对话框和较强的纠错机制，很适合缺乏专业GIS人才的县市级政府管理部门使用。文中还以贵州省沿河县资源遥感信息系统为例，对SK setV4.0的功能和使用方法进行了具体的介绍。     

Anatomy of shelf deltas at the edge of a prograding Eocene shelf margin, Spitsbergen

Abstract Although shelf‐edge deltas are well‐imaged seismic features of Holocene and Pleistocene shelf margins, documented outcrop analogues of these important sand‐prone reservoirs are rare. The facies and stratigraphic architecture of an outcropping shelf‐edge delta system in the Eocene Battfjellet Formation, Spitsbergen, is presented here, as well as the implications of this delta system for the generation of sand‐prone, shelf‐margin clinoforms. The shelf‐edge deltas of the Battfjellet Formation on Litledalsfjellet and Høgsnyta produced a 3–5 × 15 km, shelf edge‐attached, slope apron (70 m of sandstones proximally, tapering to zero on the lower slope). The slope apron consists of distributary channel and mouth‐bar deposits in its shelf‐edge reaches, passing downslope to slope channels/chutes that fed turbiditic lobes and spillover sheets. In the transgressive phase of the slope apron, estuaries developed at the shelf edge, and these also produced minor lobes on the slope. The short‐headed mountainous rivers that drained the adjacent orogenic belt and fed the narrow shelf, and the shelf‐edge position of the discharging deltas, made an appropriate setting for the generation of hyperpycnal turbidity currents on the slope of the shelf margin. The abundance of organic matter and of coal fragments in the slope turbidites is consistent with this notion. Evidence that many of the slope turbidites were generated by sustained turbidity currents that waxed then waned includes the presence of scour surfaces and thick intervals of plane‐parallel laminae within turbidite beds in the slope channels, and thick spillover lobes with repetitive alternations of massive and flat‐laminated intervals. The examined shelf‐edge to slope system, now preserved mainly below the shelf break and dominated by sediment gravity‐flow deposits, has a threefold stratigraphic architecture: a lower, progradational part, in which the clinoforms have a slight downward‐directed trajectory; a thin aggradational zone; and an upper part in which clinoforms backstep up onto the shelf edge. A greatly increased density of erosional channels and chutes marks the regressive‐to‐transgressive turnaround within the slope apron, and this zone becomes an angular unconformity up near the shelf edge. This unconformity, with both subaerial and subaqueous components, is interpreted as a sequence boundary and developed by vigorous sand delivery and bypass across the shelf edge during the time interval of falling relative sea level. The studied shelf‐margin clinoforms accreted mostly during falling stage (sea level below the shelf edge), but the outer shelf later became estuarine as sea level became re‐established above the shelf edge.     

A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

Analyzing CO2 emissions mitigation by technology improvement in Central and Eastern Europe

As a legacy of the centrally planned economy, the economies in transition of Central and Eastern Europe (CEE) have a unique potential to reduce their greenhouse gas emissions through the improvement in their high energy intensities. Since much of this `low-hanging fruit' in energy-efficiency improvements can be highly cost-effective, many developed countries facing difficulties in meeting their greenhouse gas (GHG) emission targets domestically are eager to find such opportunities in the CEE region. Therefore, studies analysing the potentials and costs of carbon dioxide reduction through technology improvement in the region have come into the limelight. While there are a few excellent studies in the region aimed at analysing climate change abatement potentials, they all embark on different assumptions, methodologies and boundary conditions. It is hence difficult, if not impossible, to compare and analyse the results of these studies across different authors, countries or time horizons. Consequently, the purpose of this paper is to place four leading studies on GHG mitigation through technology improvement from the CEE region into an internationally comparable framework. Four studies were selected from three countries, Poland, Hungary and Estonia, which are all the results of major national and international efforts to assess costs and potentials of GHG reduction. The paper places their assumptions, methods and final results into a framework which enables policy-makers and project designers to compare these across geographical and technological boundaries. Since other studies from around the globe have been analysed in this framework in the literature, this paper provides a vehicle for the findings of these four studies to be compared to others worldwide. In addition, the paper highlights a few areas where similar studies to be completed in the future in the region may be enhanced by incorporating features used in GHG mitigation research in other parts of the world. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cathodoluminescence of authigenic albite

Authigenic albites in carbonate rocks typically grow in a high-grade diagenetic to low-grade metamorphic environment and often show Roc-Tourné-twinning sensu Füchtbauer. Based on an investigation of four Middle to South European occurrences, they show Mn²⁺- and Fe³⁺-activated cathodoluminescence (CL), as revealed by combined high resolution spectroscopy of cathodoluminescence emission (HRS-CL), electron paramagnetic resonance (EPR), and proton-induced X-ray emission (μPIXE).     

Documentary and Geological Records of Tsunamis in the Aegean Sea Region of Greece and their Potential Value to Risk Assessment and Disaster Management

Understanding the nature and impacts of tsunamis within the Aegean Sea region ofGreece is of importance to both the academic community and those organisationsconcerned with tsunami disaster management. In order to determine hazard and riskand consequently pre-plan mitigative strategies, it is necessary to analyse historical(documentary) and geological records of former tsunami events. Therefore, firstlythis paper provides a summary of the written sources of information on Aegeantsunamis paying particular attention to published catalogues. From the availabledata, it is noted that a large number of events have been reported during the last3500 years. Secondly, the paper provides a review of the published on-shore(terrestrial) geological records of tsunamis within the region. From this analysisit is seen that little geological evidence has been identified for the large numberof tsunamis reported in the catalogues. Thirdly, the paper considers the reliabilityof the written and geological records and how problems of accuracy, coverage,extent and reliability, may have potential implications for the estimation of hazardand risk. The paper concludes by making recommendations for disaster managers,geologists and historians to work closely together.     

交流变频调速CD-2B型岩心钻机的研制

介绍了交流变频调速CD－2B型岩心钻机研制情况，技术参数，主要特点及型式检验，生产试验等情况。